캐드캠 세라믹의 코어와 베니어의 서로 다른 두께가 반투명도에 미치는 영향
Effect of translucency on CAD/CAM ceramic according to different core/veneer thickness
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objectives: The purpose of this study was to evaluation the effect of translucency on CAD/CAM ceramic according to different core/veneer thicknesses. Methods: A total of 42 samples from 2 groups of 7 ceramic cores, each with 3 thickness values (0.8, 1.0, 1.2 mm) were manufactured. The veneers were also manufactured in 3 thicknesses (0.3, 0.5, 0.7 mm). The group names were based on the name of the ceramic core (IPS e.Max CAD; LD, and IPS Empress CAD; LR). The associated number was determined by the combined thickness of the core and veneer: 1 = (0.8 + 0.7); 2 = (1.0 + 0.5); 3 = (1.2 + 0.3). The translucency was measured using a spectrophotometer and defined via the contrast ratio (CR) and translucency parameter (TP). Two-way ANOVA was performed to compare the 2 groups (material and thickness). Results: As the core thickness increased, the TP value also increased, and the CR value (for LR group) decreased. The results of 2-way ANOVA demonstrated that the thicknesses of different core/veneer combinations significantly affected the translucency (p<0.05). Conclusions: The different core and veneer thicknesses affected the translucency of CAD/CAM ceramic.
Abstract
Objectives: The purpose of this study was to evaluation the effect of translucency on CAD/CAM ceramic according to different core/veneer thicknesses. Methods: A total of 42 samples from 2 groups of 7 ceramic cores, each with 3 thickness values (0.8, 1.0, 1.2 mm) were manufactured. The veneers were also manufactured in 3 thicknesses (0.3, 0.5, 0.7 mm). The group names were based on the name of the ceramic core (IPS e.Max CAD; LD, and IPS Empress CAD; LR). The associated number was determined by the combined thickness of the core and veneer: 1 = (0.8 + 0.7); 2 = (1.0 + 0.5); 3 = (1.2 + 0.3). The translucency was measured using a spectrophotometer and defined via the contrast ratio (CR) and translucency parameter (TP). Two-way ANOVA was performed to compare the 2 groups (material and thickness). Results: As the core thickness increased, the TP value also increased, and the CR value (for LR group) decreased. The results of 2-way ANOVA demonstrated that the thicknesses of different core/veneer combinations significantly affected the translucency (p<0.05). Conclusions: The different core and veneer thicknesses affected the translucency of CAD/CAM ceramic.
참고문헌 (33)
- Alvin G. Wee, "Variation in color between intended matched shade and fabricated shade of dental porcelain", The Journal of Prosthetic Dentistry, 87(6), pp.657~666 (2002), Elsevier BV[DOI]
- Nakamura T, "Influence of abutment substrate and seramic thickness on the colour of heat-pressed cereamic crowns", J Oral Rehabil, 29, pp.805~809 (2002)
- Vichi A, "Influence of ceramic and cement thickness on the masking of various types of opaque posts", J Prosthet Dent, 83, pp.412~417 (2000)
- Raptis NV, "Optical behavior of current ceramic systems", Int J Periodontics Restorative Dent, 26, pp.31~41 (2006)
- Rosenstiel SF, "Contemporary fixed prosthodontics", pp.264~265 (2016), Mosby
- Takashi MIYAZAKI, "A review of dental CAD", CAM: current status and future perspectives from 20 years of experience, 2009, pp.28(1), 44~56[DOI]
- GB Guarda, "Effects of Surface Treatments, Thermocycling, and Cyclic Loading on the Bond Strength of a Resin Cement Bonded to a Lithium Disilicate Glass Ceramic", Operative Dentistry, 38(2), pp.208~217 (2013), Operative Dentistry[DOI]
- Alma Dozić, "The influence of porcelain layer thickness on the final shade of ceramic restorations", The Journal of Prosthetic Dentistry, 90(6), pp.563~570 (2003), Elsevier BV[DOI]
- S.P. Davison, "Shade selection by color vision-defective dental personnel", The Journal of Prosthetic Dentistry, 63(1), pp.97~101 (1990), Elsevier BV[DOI]
- Sedanur Turgut, "Effect of Ultraviolet Aging on Translucency of Resin-Cemented Ceramic Veneers: An In Vitro Study", Journal of Prosthodontics, 23(1), pp.39~44 (2014), Wiley[DOI]
- Wyszecki G, "Color science: concepts and methods, quantitative data and formula", pp.567~569 (1982), Wiley
- Fu Wang, "Translucency of dental ceramics with different thicknesses", The Journal of Prosthetic Dentistry, 110(1), pp.14~20 (2013), Elsevier BV[DOI]
- Bin Yu, "Measurement of translucency of tooth enamel and dentin", Acta Odontologica Scandinavica, 67(1), pp.57~64 (2009), Informa UK Limited[DOI]
- Lisa S. Spink, "Comparison of an absolute and surrogate measure of relative translucency in dental ceramics", Dental Materials, 29(6), pp.702~707 (2013), Elsevier BV[DOI]
- Funda Bayindir, "Coverage error of three conceptually different shade guide systems to vital unrestored dentition", The Journal of Prosthetic Dentistry, 98(3), pp.175~185 (2007), Elsevier BV[DOI]
- Rena Oguro, "The role of enamel thickness and refractive index on human tooth colour", Journal of Dentistry, 51, pp.36~44 (2016), Elsevier BV[DOI]
- J.J. ten Bosch, "Tooth Color and Reflectance as Related to Light Scattering and Enamel Hardness", Journal of Dental Research, 74(1), pp.374~380 (2016), SAGE Publications[DOI]
- J L Stroud, "Sexual dimorphism in mesiodistal dentin and enamel thickness.", Dentomaxillofacial Radiology, 23(3), pp.169~171 (1994), British Institute of Radiology[DOI]
- Holloway JA, "The effect of core translucency on the aesthetics of all-ceramic restorations", Pract Periodontics Aesthet Dent, 9, pp.567~574 (1997)
- J.Robert Kelly, "Ceramics in dentistry: Historical roots and current perspectives", The Journal of Prosthetic Dentistry, 75(1), pp.18~32 (1996), Elsevier BV[DOI]
- Heffernan MJ, "Relative translucency of six all-ceramic systems. Part Ⅱ: core and veneer materials", J Prosthet Dent, 98, pp.10~15 (2002)[DOI]
- Antonson SA, "Contrast ratio of veneering and core ceramics as a function of thickness", Int J Prosthodont, 14(4), pp.316~320 (2001)
- Johnston WM, "Translucency parameter of colorants for maxillofacial prostheses", Int J Prosthodont, 8(1), pp.79~86 (1995)
- Zhang Y, "Influence of powder", liquid mixing ratio on porosity and translucency of dental porcelains, 2004, pp.91(2), 128~135
- W.J. O'Brien, "A New, Small-color-difference Equation for Dental Shades", Journal of Dental Research, 69(11), pp.1762~1764 (2016), SAGE Publications[DOI]
- Jin HJ, "A comparative study on the translucency of various all-ceramic crown materials", Doctoral, pp.2006
- Baltzer A, "Shading of ceramic crowns using digital tooth shade matching devices", Int J Comput Dent, 8(2), pp.129~152 (2005)
- Bolt RA, "Influence of window size in small-window colour measurement, particularly of teeth", Phys Med Biol, 39, pp.1133~1142 (1994)[DOI]
- J.C. Ragain, "Accuracy of Kubelka-Munk Reflectance Theory Applied to Human Dentin and Enamel", Journal of Dental Research, 80(2), pp.449~452 (2016), SAGE Publications[DOI]
- Pinar Kursoglu, "Translucency of ceramic material in different core-veneer combinations", The Journal of Prosthetic Dentistry, 113(1), pp.48~53 (2015), Elsevier BV[DOI]
- Alvaro Della Bona, "Optical properties of CAD–CAM ceramic systems", Journal of Dentistry, 42(9), pp.1202~1209 (2014), Elsevier BV[DOI]
- Ilie N, "Correlation between ceramics translucency and polymerization efficiency through ceramics", Dental Mater, 24, pp.908~914 (2008)
- Audrea Dallazem Nogueira, "The effect of a coupling medium on color and translucency of CAD–CAM ceramics", Journal of Dentistry, 41, pp.e18~e23 (2013), Elsevier BV[DOI]