광 PCB 및 패키징 기술
Optical PCB and Packaging Technology
1
조회
0
다운로드
6
인용
0
참고문헌
초록
According to increasing of data transfer rate, printed circuit board (PCB) is required improvement of transmission speed. Optical PCB and its packaging technology can be one of the solutions that overcome the limitations of conventional electrical PCB. The data transmission capacity will be increased 10 Tbps at 2015. To this end, studies on various OPCB technologies are being conducted. For cost-effective and high- performance OPCB, studies of optical coupling by polymer replication process are conducted. In this work, optical waveguide and optical fiber array block were sequentially fabricated by polymer pattern replication method. Using this method we successfully demonstrate low loss optical fiber coupling between optical waveguide and optical fiber arrays. And researches on flip chip bonding process and using electro-optic connectors for packaging are conducted.
Abstract
According to increasing of data transfer rate, printed circuit board (PCB) is required improvement of transmission speed. Optical PCB and its packaging technology can be one of the solutions that overcome the limitations of conventional electrical PCB. The data transmission capacity will be increased 10 Tbps at 2015. To this end, studies on various OPCB technologies are being conducted. For cost-effective and high- performance OPCB, studies of optical coupling by polymer replication process are conducted. In this work, optical waveguide and optical fiber array block were sequentially fabricated by polymer pattern replication method. Using this method we successfully demonstrate low loss optical fiber coupling between optical waveguide and optical fiber arrays. And researches on flip chip bonding process and using electro-optic connectors for packaging are conducted.
참고문헌 (13)
- 정명혁, "Sn-3.0Ag-0.5Cu 솔더범프의 금속간화합물 성장거동에 미치는 PCB 표면처리의 영향", 마이크로전자 및 패키징학회지, 17(1), pp.81~88 (2010), 한국마이크로전자및패키징학회
- 유선중, "UV 장비 및 대기압 플라즈마 장비를 이용한 PCB 표면 처리 효과 비교", 마이크로전자 및 패키징학회지, 16(3), pp.53~59 (2009), 한국마이크로전자및패키징학회
- W. J. Lee, "Polymeric waveguide film with embedded mirror for multilayer optical circuits", Technol. Lett, 통권 : 21, pp.12~, IEEE Photon
- X. Dou, "Polymeric waveguides with embedded micromirrors formed by metallic hard mold", Opt. Express, 통권 : 18, pp.378~ (2009)
- J. Wu, "Soft- lithography-based optical interconnection with high misalignment tolerance", Opt. Express, 통권 : 13, pp.6259~ (2005)
- H. L. Hsiao, "Compact and passive-alignment 4-channel x 2.5- Gbps optical interconnect modules based on silicon optical benches with 45o micro-reflectors", Opt. Express, 통권 : 17, pp.24250~ (2009)
- Jin-Hwa Ryu,, "Imprinted optical device and its reliability", Current Applied Physics, 9(2)통권 : 9, pp.7~11 (2009), 한국물리학회
- "Simple fabrication of a double-layer multi-channel optical waveguide using passive alignment", OPTICS EXPRESS, 19(2)통권 : 19, pp.1183~
- 김남웅, "열-나노임프린트 공정의 점탄성 유한요소해석", 마이크로전자 및 패키징학회지, 14(4), pp.1~7 (2007), 한국마이크로전자및패키징학회
- J. T. Kim, "Passive alignment method of polymer PLC devices by using a hot embossing technique", IEEE Photonics Technology Letters, 16(7)통권 : 16, pp.1664~1666 (2004), Institute of Electrical and Electronics Engineers
- R. V. Penty, "Polymer waveguide integrated circuits", 15th OptoElectronics and Communications Conference (OECC 2010) (2010)
- N. Bamiedakis, "Optical transceiver integrated on PCB using electro-optic connectors compatible with pick-and-place assembly technology", Optoelectronic Interconnects and Component Integration, 통권 : 9, pp.760700~ (2010)
- A. Hashim, "Low-cost 10 Gb", s Chip-to-chip Optical Interconnect, 2010, pp.3~21