리플로우 솔더링 공정 조건에 따른 Sn-Bi-Ag와 Sn-Ag-Cu 복합 무연 솔더 접합부 특성 연구
A Study on Properties of Pb-free Solder Joints Combined Sn-Bi-Ag with Sn-Ag-Cu by Conditions of Reflow Soldering Processes
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
본 연구에서는 용융온도가 중온계 무연 솔더인 Sn-3.0Ag-0.5Cu(SAC305)와 저온계 무연 솔더인 Sn-57Bi-1Ag 를 사용하여 형성된 복합 무연 솔더 접합부의 특성에 대하여 보고 하였다. SAC305 솔더볼이 형성된 ball grid array(BGA) 패키지와 Sn-57Bi-1Ag 솔더 페이스트가 도포된 flame retardant-4(FR-4) 인쇄회로기판(printed circuit board, PCB)을 리플로우 솔더링 공정을 이용하여 복합 무연 솔더 접합부를 형성 하였다. 공정 온도 프로파일을 두 가지 형태로 달리하여리플로우 솔더링 공정을 진행하였으며 리플로우 솔더링 공정 조건에 따른 계면 반응, 금속간화합물(intermetallic compound, IMC)의 형성, Bi의 확산 거동 등 복합 무연 솔더 접합부 계면 특성을 비교 분석 하였다. 또한, 열 충격 시험을 통하여 리플로우 솔더링 공정에 따른 복합 무연 솔더 접합부의 신뢰성 특성을 비교하고 열 충격 시험 전후 전단 시험을 진행하여 접합부의 기계적 특성 변화를 분석하였다.
Abstract
In this study, properties of Pb-free solder joints which were combined using Sn-3.0Ag-0.5Cu (SAC305) Pbfree solder with a mid-temperature type of melting temperature and Sn-57Bi-1Ag Pb-free solder with a low-temperature type of melting temperature were reported. Combined Pb-free solder joints were formed by reflow soldering processes with ball grid array (BGA) packages which have SAC305 solder balls and flame retardant-4 (FR-4) printed circuit boards (PCBs) which printed Sn-57Bi-1Ag solder paste. The reflow soldering processes were performed with two types of temperature profiles and interfacial properties of combined Pb-free solder joints such as interfacial reactions, formations of intermetallic compounds (IMCs), diffusion mechanisms of Bi, and so on were analyzed with the reflow process conditions. In order to compare reliability characteristics of combined Pb-free solder joints, we also conducted thermal shock test and analyzed changes of mechanical properties for joints from a shear test during the thermal shock test.
참고문헌 (25)
- A. Sharif, "Effect of volume in interfacial reaction between eutectic Sn–Pb solder and Cu metallization in microelectronic packaging", Mater. Sci. Eng. : B, 106(2), pp.120~ (2004)
- C. Kanchanomai, "Low cycle fatigue behavior and mechanisms of a eutectic Sn–Pb solder63Sn", 37Pb, 2002, pp.24(6), 671~
- "Directive 2002", 95, The European Parliament and of the Council of the European Union, pp.2003, ~
- K. S. Kim, "Effects of intermetallic compounds on properties of Sn–Ag–Cu lead-free soldered joints", J. Alloys Compd., 352(1), pp.226~ (2003)
- S. Choi, "Characterization of the Growth of Intermetallic Interfacial Layers of Sn-Ag and Sn-Pb Eutectic Solders and Their Composite Solders on Cu Substrate During Isothermal Long-Term Aging", J. Electron. Mater., 28, pp.1209~ (1999)
- R. Mahmudi, "Room-temperature indentation creep of lead-free Sn–Bi solder alloys", J. Mater. Sci. : Mater. Electron, 18, pp.1071~ (2007)
- J. W. Yoon, "Reliability Investigation and Interfacial Reaction of Ball-Grid-Array Packages Using the Lead-Free Sn-Cu Solder", J. Electron. Mater, 33, pp.1190~ (2004)
- J. W. Yoon, "Intermetallic compound layer growth at the interface between Sn–Cu–Ni solder and Cu substrate", J. Alloys Compd., 381(1), pp.151~ (2004)
- T. Plookphol, "Influence of process parameters on SAC305 lead-free solder powder produced by centrifugal atomization", Powder Technol., 214(3), pp.506~ (2011)
- 신현필, "Sn-58Bi 솔더 페이스트와 ENIG 표면 처리된 기판 접합부의 계면 반응 및 접합강도", 대한용접접합학회지, 30(5), pp.458~463 (2012), 대한용접접합학회
- J. H. Kim, "Effect of surface finishes on electromigration reliability in eutectic Sn–58Bi solder joints", Microelectron. Eng, 120, pp.77~ (2014)
- X. Chen, "Effect of In on microstructure, thermodynamic characteristic and mechanical properties of Sn–Bi based lead-free solder", J. Alloys Compd, 633, pp.377~ (2015)
- O. Mokhtari, "Effects of In and Ni Addition on Microstructure of Sn-58Bi Solder Joint", J. Electron. Mater, 43(11), pp.4158~ (2014)
- W. R. Myung, "Mechanical property of the epoxy-contained Sn–58Bi solder with OSP surface finish", J. Alloys Compd., 615(1), pp.411~ (2014)
- C. Fuchs, "Interfacial reactions between Sn-57Bi-1Ag solder and electroless Ni-P", immersion Au under soild-state aging, 2012, pp.47(9), 4036~
- T. J. Swanson, "Properties of Mixing SAC Solder Alloys with Bismuth-Containing Solder Alloys for a Low Reflow Temperature Process", Master, pp.2018
- Y. Liu, "Improving Sn-0.3Ag-0.7Cu low-Ag lead-free solder performance by adding Bi element", Int. Forum Strateg. Tech, 2010, pp.11697436~ (2010)
- Y. Liu, "Microstructure and shear behavior of solder joint with Sn58Bi", Sn3.0Ag0.5Cu, J. Mater. Sci. Mater. Electron, pp.2019, 30[DOI]
- H. Wang, "Product Level Design Optimization for 2.5 D Package Pad Cratering Reliability During Drop Impact", 2019 IEEE 69th Electronic Components and Technology Conference (ECTC), pp.2343~2348 (2019), IEEE
- S. Sahasrabudhe, "Low Temperature Solder-A Breakthrough Technology for Surface Mounted Devices", 2018 IEEE 68th Electronic Components and Technology Conference(ECTC), pp.18001596~ (2018)
- C. Cai, "Reliability of homogeneous Sn-Bi and hybrid Sn-Bi", SAC BGAs, 2020 (2020), 19889381~
- 김이슬, "Cu-Sn계 솔더와 기판 사이의 Ni층의 두께와 열처리 시간에 따른 금속간화합물의 기계적 특성", 대한금속·재료학회지, 55(3), pp.165~172 (2017), 대한금속·재료학회[DOI]
- 김정수, "Sn-58Bi Solder와 OSP 표면 처리된 PCB의 접합강도에 미치는 시효처리와 에폭시의 영향", 마이크로전자 및 패키징학회지, 21(4), pp.97~103 (2014), 한국마이크로전자및패키징학회[DOI]
- 손윤철, "계면 화학반응과 무전해 니켈 금속층에서 나타나는 취성파괴와의 연관성에 관한 연구", 마이크로전자 및 패키징학회지, 12(1), pp.41~46 (2005), 한국마이크로전자및패키징학회
- 하상수, "무연 솔더가 적용된 자동차 전장부품 접합부의 열적.기계적 신뢰성 평가", 대한용접접합학회지, 24(6), pp.21~27 (2006), 대한용접접합학회