글로벌 배선 적용을 위한 UV 패턴성과 UV 경화성을 가진 폴리실록산
Organic-inorganic Hybrid Dielectric with UV Patterning and UV Curing for Global Interconnect Applications
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
As the performance and density of IC (integrated circuit) devices increase, power and signal integrities in the global interconnects of advanced packaging technologies are becoming more difficult. Thus, the global interconnect technologies should be designed to accommodate increased input/output (I/O) counts, improved power grid network integrity, reduced RC delay, and improved electrical crosstalk stability. This requirement resulted in the fine-pitch interconnects with a low-k dielectric in 3D packaging or wafer level packaging structure. This paper reviews an organicinorganic hybrid material as a potential dielectric candidate for the global interconnects. An organic-inorganic hybrid material called polysiloxane can provide spin process without high temperature curing, an excellent dielectric constant, and good mechanical properties.
Abstract
As the performance and density of IC (integrated circuit) devices increase, power and signal integrities in the global interconnects of advanced packaging technologies are becoming more difficult. Thus, the global interconnect technologies should be designed to accommodate increased input/output (I/O) counts, improved power grid network integrity, reduced RC delay, and improved electrical crosstalk stability. This requirement resulted in the fine-pitch interconnects with a low-k dielectric in 3D packaging or wafer level packaging structure. This paper reviews an organicinorganic hybrid material as a potential dielectric candidate for the global interconnects. An organic-inorganic hybrid material called polysiloxane can provide spin process without high temperature curing, an excellent dielectric constant, and good mechanical properties.
참고문헌 (45)
- S. E. Thompson, "Moore’s law: the future of Si microelectronics", Mater Today, 9(6), pp.20~ (2006)
- K. C. Saraswat, "Effect of scaling of interconnections on the time delay of VLSI circuits", IEEE Trans. on Electron Dev, 29(4), pp.645~ (1982)
- M. T. Bohr, "Technology for advanced high-performance microprocessors", IEEE Trans. on Electron Dev, 45(3), pp.620~ (1998)
- A. A. Vyas, "On-Chip Interconnect Conductor Materials for End-of-Roadmap Technology Nodes", IEEE Transactions on Nanotechnology, 17(1), pp.4~ (2018)
- T. Ohba, "A study of current multilevel interconnect technologies for 90nm nodes and beyond", Fujitsu Sci. Tech. J, 38(1), pp.13~ (2002)
- 김은경, "Fine-pitch 소자 적용을 위한 bumpless 배선 시스템", 마이크로전자 및 패키징학회지, 21(3), pp.1~6 (2014), 한국마이크로전자및패키징학회[DOI]
- D. Shamiryan, "Low K dielectric materials", Mater. Today, 7(1), pp.34~ (2004)
- K. Maex, "Low dielectric constant materials for microelectronics", J. Appl. Phys, 93(11), pp.8793~ (2003)
- J. Gambino, "Copper interconnect technology for the 32nm node and beyond", Proc. IEEE Custom Integrated Circuits Conference, pp.141~ (2009)
- M. Morgen, "Low dielectric constant materials for ULSI interconnects", Annu. Rev. Mater. Sci, 30(1), pp.645~ (2000)
- M. Töpper, "A Comparison of Thin Film Polymers for Wafer Level Packaging", Proc. IEEE Electronic Components and Technology Conference (ECTC), pp.769~ (2010)
- X. Fan, "Wafer Level Packaging (WLP): Fan-in, Fan-out and Three-Dimensional Integration", Proc. Int. Conf. on Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE (2010)
- X. J. Fan, "Design and optimization of thermo-mechanical reliability in wafer level packaging", Microelectronics Reliability, 50(4), pp.536~ (2010)
- T. Meyer, "Embedded Wafer Level Ball Grid Array (eWLB)", IEEE EPTC, pp.994~ (2008)
- J. H. Lau, "Fan-Out Wafer-Level Packaging for Heterogeneous Integration", IEEE Transactions on Components, Packaging and Manufacturing Technology, 8(9), pp.1544~ (2018)
- L. Shi, "Investigation on solder bump process polyimide cracking for wafer level packaging", Proc. IEEE International Conference on Electronic Packaging Technology (ICEPT), pp.1140~ (2016)
- S. S. Boon, "Evaluation on multiple layer PBO-based Cu RDL process for Fan-Out Wafer Level Packaging (FOWLP)", Proc. IEEE Electronics Packaging Technology Conference (EPTC), pp.662~ (2016)
- M. Nishimura, "Reliability of 200oC curable photodefinable PBO for re-distribution layer in WLP", Proc. IEEE CPMT Symposium Japan (ICSJ), pp.197~ (2016)
- A. Tanimoto, "Development of Positive-tone Photodefinable Material for Redistribution Layer", J. Photopolym. Sci. Technol, 30(2), pp.231~ (2017)
- Y. S. Chan, "Effect of UBM and BCB layers on the thermo-mechanical reliability of wafer level chip scale package (WLCSP)", Proc. 4th International Microsystems, Packaging, Assembly and Circuits Technology Conference, pp.407~ (2009)
- P. Judeinstein, "Hybrid organic-inorganic materials: a land of multidisciplinarity", J. Muter. Chem, 6(4), pp.511~ (1996)
- E. Ayandele, "Polyhedral Oligomeric Silsesquioxane (POSS)-Containing Polymer Nanocomposites", Nanomaterials, 2(4), pp.445~ (2012)
- S. S, "Polysilsesquioxane", Polymer Science and Technology, 20(2), pp.135~ (2009)
- K. B. Yoon, "Synthesis and characteristics of POSS polymers", Polymer Science and Technology, 16(6), pp.833~ (2005)
- H. M. Lin, "Characterization of negative-type photoresists containing polyhedral oligomeric silsesquioxane methacrylate", Microelectron. Eng, 85(7), pp.1624~ (2008)
- N. Fritz, "Photodefinable Epoxycyclohexyl Polyhedral Oligomeric Silsesquioxane", J. Electronic Materials, 39(2), pp.149~ (2010)
- D. Kessler, "Synthesis of Functional Inorganic-Organic Hybrid Polymers Based on Poly(silsesquioxanes) and Their Thin Film Properties", Macromolecules, 41(14), pp.5237~ (2008)
- D. Kessler, "Reactive Surface Coatings Based on Polysilsesquioxanes: Controlled Functionalization for Specific Protein Immobilization", Langmuir, 25(17), pp.10068~ (2009)
- W. Chen, "Functionalized polysilsesquioxane film fluorescent sensors for sensitive detection of polychlorinated biphenyls", Journal of Organometallic Chemistry, 749, pp.296~ (2014)
- D. Cordes, "Recent Developments in the Chemistry of Cubic Polyhedral Oligosilsesquioxanes", Chem. Rev, 110(4), pp.2081~ (2010)
- K. Tanaka, "Advanced functional materials based on polyhedral oligomeric silsesquioxane (POSS)", J. Mater. Chem, 22(5), pp.1733~ (2012)
- R. Tamaki, "Application of organic-inorganic polymer hybrids as selective gas permeation membranes", J. Mater. Chem, 8, pp.1741~ (1999)
- T. Ogoshi, "Synthesis of Photosensitive Organic-Inorganic Polymer Hybrids by Utilizing Caged Photoactivatable Alkoxysilane", Macromolecules, 37, pp.5916~ (2004)
- M. Morita, "Methacrylated silicone-based negative photoresist for high resolution bilayer resist systems", J. Vac. Sci. Technol. B: Microelectronics Processing and Phenomena, 4(1), pp.414~ (1998)
- K. Kim, "Organic-Inorganic Polymer Hybrids Using Polyoxazoline Initiated by Functionalized Silsesquioxane", Macromolecules, 6, pp.867~ (2003)
- C.-L. Chiang, "Synthesis, characterization and thermal properties of novel epoxy containing silicon and phosphorus nanocomposites by sol-gel method", European Polymer Journal, 38(11), pp.2219~ (2002)
- C.-L. Chiang, "Synthesis, characterization, and thermal properties of bridged polysilsesquioxanes-molecular nanocomposites", ECCM, 13, pp.1~ (2008)
- G. Cerveau, "Sol-gel process—influence of ageing on the textural properties of organosilsesquioxane materials", J. Mater. Chem, 11(3), pp.713~ (2001)
- G. Cerveau, "Influence of the nature of the catalyst on the textural properties of organosilsesquioxane materials", Polyhedron, 19(3), pp.307~ (2000)
- S. Sankaraiah, "Preparation and Characterization of Surface-Functionalized Polysilsesquioxane Hard Spheres in Aqueous Medium", Macromolecules, 41(16), pp.6195~ (2008)
- A. Dabrowski, "Ethylene and phenylene bridged polysilsesquioxanes functionalized by amine and thiol groups as adsorbents of volatile organic compounds", Applied Surface Science, 253(13), pp.5747~ (2007)
- R. Puyenbroek, "Functionalization of polysilsesquioxanes", Polymer, 35(14), pp.3131~ (1994)
- D. W. Scott, "Thermal Rearrangement of Branche d-C hain Me thylpoly siloxanes", J. Am. Chem. Soc, 68, pp.356~ (1946)
- J. F. Brown, "Double chain polymers of phenylsilsesquioxane", J. Am. Chem. Soc, 82, pp.6194~ (1960)
- A. S. S. Lee, "Functional Silsesquioxane Coating Materials", Polymer Science and Technology, 27(4), pp.287~ (2016)