Double Side SMT and Molding Process Development for mPossum Package
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
3-Dimensional System in Package (3-D SiP) structure (Amkor calls it mPossum-molded Possum) using double side Surface Mount Technology (SMT) and double side molding was evaluated in order to achieve small/thin form factor as well as good functionality by integration and double side layout. As the new platform on laminate substrate basis, molding process was challenge in mold flow balance at top and bottom side and package warpage control over the overall assembly process. There were two types of different molding process evaluated with 1) 1-step molding which was done at both side at the same time and 2) 2-step molding which was done at the conventional molding process twice. Mold simulation helped to narrow down the material selections and parameters available before actual sample build. There were many challenges for this first trial in design/ parameter and material types but optimized them to enable this structure.
Abstract
3-Dimensional System in Package (3-D SiP) structure (Amkor calls it mPossum-molded Possum) using double side Surface Mount Technology (SMT) and double side molding was evaluated in order to achieve small/thin form factor as well as good functionality by integration and double side layout. As the new platform on laminate substrate basis, molding process was challenge in mold flow balance at top and bottom side and package warpage control over the overall assembly process. There were two types of different molding process evaluated with 1) 1-step molding which was done at both side at the same time and 2) 2-step molding which was done at the conventional molding process twice. Mold simulation helped to narrow down the material selections and parameters available before actual sample build. There were many challenges for this first trial in design/ parameter and material types but optimized them to enable this structure.
참고문헌 (5)
- S. K. Saha, "Emerging business trends in the semiconductor industry", Proc. Technology Management in the IT-Driven Services (PICMET), pp.2744~ (2013), IEEE
- K. Morihiro, "Toward the 3D-SiP Era with New Technologies", Proc. 5th International Microelectronics and Packaging Society Conference (ISMP), pp.109~ (2006), The Korean Microelectronics and Packaging Society
- J. Y. Kim, "State of The Art in Semiconductor Package for Mobile Devices", The Journal of Korean Institute of Electromagnetic Engineering and Sience, 24(2), pp.23~ (2013)
- 김병진, "RtMLF(Routable Molded Lead Frame) 패키지 소개 및 응용", 마이크로전자 및 패키징학회지, 22(2), pp.41~45 (2015), 한국마이크로전자및패키징학회[DOI]
- J. S. Kim, "Strip grinding introduction for thin PoP", Proc. 64th Electronic Components and Technology Conference (ECTC), pp.1361~ (2014), IEEE