무용제 타입 UV경화형 실버 페이스트 개발
Development of Solvent-Free Type for UV-Curable Silver Paste
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 용제를 전혀 사용하지않고 UV경화가 가능한 실버 페이스트를 개발하였다. 무용제(solvent-free) 타입으로 개발한 실버 페이스트의 점도 및 점탄성 측정하였다. 그리고 스크린인쇄로 패턴을 인쇄한 후에 UV경화로 전극도막을 형성시켰다. 형성된 전극도막의 전도성, 연필경도, 접착력에 대해서 평가하였다. 마지막으로 전극도막의 경화특성은 TGA 및 FT-IR로 평가하였다. 이러한 결과를 정리하면 전도성, 접착력, 경화특성에 대해서는 Paste(4), 즉 1.2 m의구형 실버 파우더와 50 nm 실버 파우더를 72:8%로 혼합한 실버 페이스트가 가장 우수한 물성이 얻어짐을 알 수 있었다.
Abstract
In this study, a silver paste capable of UV curing without using any solvent was developed. The viscosity and viscoelasticity of the silver paste developed as a solvent-free type were measured. And after printing the pattern by screen printing, an electrode coating film was formed by UV curing. Conductivity, pencil hardness, and adhesive force of the formed electrode coating film were evaluated. Finally, the curing characteristics of the electrode coating film were evaluated by TGA and FT-IR. Summarizing these results, in terms of conductivity, adhesion, and curing characteristics, it was found that Paste (4), that is, silver paste obtained by mixing 1.2 m spherical silver powder and 50 nm silver powder at 72:8% had the best physical properties.
참고문헌 (11)
- 김동진, "터치스크린용 Ag pastes 종류에 따른 신뢰성 테스트 특성 연구", 한국화상학회지, 18(1), pp.1~7 (2012), 한국화상학회[DOI]
- M. Amjadi, "Ultra-stretchable and skin-mountable strain sensors using carbon nanotubes-Ecoflex nanocomposites", Nanotechnology, 26(37), pp.375501~ (2015)
- T. Q. Trung, "Flexible and Stretchable Physical Sensor Integrated Platforms for Wearable Human-Activity Monitoring and Personal Healthcare", Advanced Materials, 28(22), pp.4338~4372 (2016)
- M. Amjadi, "Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review", Advanced Functional Materials, 26(11), pp.1678~1698 (2016)
- S. S. Yang, "Preparation of conductive metal patterns using Cu nano-colloids prepared by electrical wire explosion process", Research on Chemical Intermediates, 40, pp.2457~2461 (2014)
- W. Honda, "Wearable, Human-Interactive, Health-Monitoring, Wireless Devices Fabricated by Macroscale Printing Techniques", Advanced Functional Materials, 24(22), pp.3299~3304 (2014)
- J. Suikkola, "Screen-Printing Fabrication and Characterization of Strechable Electronics", Scientific Reports, 6, pp.25784~ (2016)
- N. Matsushisa, "Printable elastic conductors with a high conductivity for electronic textile applications", Nature Communications, 6, pp.7461~ (2015)
- C. K. Lim, "Effect of Polymer Binder on the Transparent Conducting Electrodes on Stretchable Film Fabricated by Screen Printing of Silver Paste", International Journal of Polymer Science, 2017, pp.9623620~ (2017)
- 이아람, "Quantitative Measurement of Ink-Blanket Adhesion for Contact Transfer Printing Inks", International Journal of Precision Engineering and Manufacturing, 16(1), pp.151~156 (2015), 한국정밀공학회
- T. M. Lee, "Roll offset printing process based on interface separation for fine and smooth patterning", Thin Solid Films, 548, pp.566~571 (2013)