복수의 아민기를 가지는 전구체를 적용하여 기계적 강도를 향상시킨 폴리우레아 가교 실리카 에어로겔
Polyurea Cross-linked Silica Aerogel with Improved Mechanical Strength by Applying a Precursor Having a Plurality of Amino Groups
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
에어로겔은 높은 기공률과 나노기공구조를 갖는 물질이다. 이러한 높은 기공률로 인해 기존의 소재에서 볼 수없는 뛰어난 특성을 보유하고 있지만 낮은 기계적 강도로 인해 적용이 제한되어왔다. 따라서 이러한 에어로겔의 기계적강도의 향상을 위해 본 연구에서는 폴리우레아 가교결합을 도입하고 폴리우레아 고분자 형성에 필수적인 아민기를 갖는전구체를 선택하여 폴리우레아가 가교결합된 에어로겔 복합체를 합성하였다. 또한, aminosilane에 존재하는 아민기의 수에 따라 폴리우레아의 가교결합을 조절하였고 다양한 분석을 통해 에어로겔이 나노기공구조를 유지하며 mesopore를 갖는다는 것을 확인하였다. 이렇게 형성된 에어로겔은 약 2배의 기계적 강도 향상을 나타내었고 Ethylene diamine의 도입을 통해 실리카 에어로겔 표면에 1차원의 고분자가 성장하는 것을 field emission scanning electron microscope 분석을통해 확인하였다. 이렇게 형성된 1차원의 고분자는 기계적 특성을 향상시켜 약 2.66 MPa의 elastic modulus를 확보하는결과를 도출하였다.
Abstract
Aerogel is a material having a nanopore structure based on a high porosity. Due to this high porosity, it has excellent properties not found in conventional materials, but its application has been limited due to low mechanical strength. Therefore, to improve the mechanical strength of the aerogel, polyurea crosslinking was introduced and a precursor having an amine group essential for polyurea polymer formation was selected to synthesize a polyurea crosslinked aerogel composite. In addition, the crosslinking of polyurea was adjusted according to the number of amine groups present in aminosilane. It was confirmed through various analyses that the nanopore structure of the aerogel was maintained to have mesopores. The aerogel thus formed was able to improve the mechanical strength by about two times, and it was confirmed through field emission scanning electron microscope analysis that a one-dimensional polymer was formed on the silica aerogel surface through the introduction of ethylene diamine. The one-dimensional polymer thus formed has improved mechanical properties, resulting in securing an elastic modulus of about 2.66 MPa.
참고문헌 (25)
- Vinayak G. Parale, "Flexible and Transparent Silica Aerogels: An Overview", 한국세라믹학회지, 54(3), pp.184~199 (2017), 한국세라믹학회
- H. S. Yang, "Ambient-dried low dielectric SiO2 aerogel thin film", J. Non-Cryst. Solids, 221, pp.151~ (1997)
- V. G. Parale, "Potential application of silica aerogel granules for cleanup of accidental spillage of various organic liquids", Soft Nanosci. Lett, 1, pp.97~ (2011)
- M. S. Kavale, "Enrichment in hydrophobicity and scratch resistant properties of silica films on glass by grafted microporosity of the network", J. Sol-Gel Sci. Technol, 64, pp.9~ (2012)
- H. Sun, "Tough polymer aerogels incorporating a conformal inorganic coating for low flammability and durable hydrophobicity", ACS Appl. Mater. Interfaces, 8, pp.13051~ (2016)
- V. G. Parale, "Facile synthesis of hydrophobic, thermally stable, and insulative organically modified silica aerogels using co-precursor method", Ceram. Int, 44, pp.3966~ (2018)
- C. A. Müller, "Organically modified titania–silica aerogels for the epoxidation of olefins and allylic alcohols", ACS Catal, 184, pp.280~ (1999)
- D. Wu, "Synthesis of organic and carbon aerogels from phenol–furfural by two-step polymerization", Microporous Mesoporous Mater, 96, pp.115~ (2006)
- K. Kanamori, "New transparent methylsilsesquioxane aerogels and xerogels with improved mechanical properties", Adv. Mater. (Weinheim, Ger. ), 19, pp.1589~ (2007)
- T. Zhou, "Mechanical performance and thermal stability of glass fiber reinforced silica aerogel composites based on co-precursor method by freeze drying", Appl. Surf. Sci, 437, pp.321~ (2018)[DOI]
- Z. Li, "Aramid fibers reinforced silica aerogel composites with low thermal conductivity and improved mechanical performance", Compos. Part A : Appl. Sci. Manuf, 84, pp.316~ (2016)
- D. J. Boday, "Strong, lowdensity nanocomposites by chemical vapor deposition and polymerization of cyanoacrylates on aminated silica aerogels", ACS Appl. Mater. Interfaces, 1, pp.1364~ (2009)
- K. J. Chang, "Preparation of silica aerogel", polyurethane composites for the application of thermal insulation, 2014, pp.21, 1~
- G. Churu, "Synthesis and mechanical characterization of mechanically strong, polyurea-crosslinked, ordered mesoporous silica aerogels", J. Sol-Gel Sci. Technol, 75, pp.98~ (2015)
- F. Ilhan, "Hydrophobic monolithic aerogels by nanocasting polystyrene on amine-modified silica", J. Mater. Chem, 16, pp.3046~ (2006)
- M. A. B. Medor, "Cross-linking amine-modified silica aerogels with epoxies : mechanically strong lightweight porous materials", Chem. Mater, 17, pp.1085~ (2005)
- M. A. B. Meador, "Mechanically strong, flexible polyimide aerogels cross-linked with aromatic triamine", ACS Appl. Mater. Interfaces, 4, pp.536~ (2012)
- H. Maleki, "Development of mechanically strong ambient pressure dried silica aerogels with optimized properties", J. Phys. Chem. C, 119, pp.7689~ (2015)
- B. N. Nguyen, "Tailoring elastic properties of silica aerogels cross-linked with polystyrene", ACS Appl. Mater. Interfaces, 1, pp.621~ (2009)
- A. Katti, "Chemical, physical, and mechanical characterization of isocyanate cross-linked aminemodified silica aerogels", Chem. Mater, 18, pp.285~ (2006)
- M. A. B. Meador, "Structure Property relationships in porous 3D nanostructures as a function of preparation conditions : isocyanate cross-linked silica aerogels", Chem. Mater, 19, pp.2247~ (2007)
- B. N. Nguyen, "Elastic behavior of methyltrimethoxysilane based aerogels reinforced with triisocyanate", ACS Appl. Mater. Interfaces, 2, pp.1430~ (2010)
- N. Leventis, "Multifunctional polyurea aerogels from isocyanates and water. A structure-property case study", Chem. Mater, 22, pp.6692~ (2010)
- T. Arunkumar, "Surface coating and characterisation of polyurea for liquid storage", Int. J. Ambient Energy, 38, pp.781~ (2017)
- N. Majoul, "Progress of porous silicon APTES-functionalization by FTIR investigations", Appl. Surf. Sci, 331, pp.388~ (2015)