건·습 텍스쳐링 가공조건이 방호의류용 Aramid ATY와 Aramid/Nylon hybrid 사의 물성에 미치는 영향
Physical Properties of Aramid and Aramid/Nylon Hybrid ATY for Protective Garments according to the Dry and Wet Texturing Conditions
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper surveys the physical properties of aramid and aramid/nylon hybrid air-jet textured yarns(ATY) for protective garments according to wet and dry texturing conditions. Aramid and nylon filaments were used to make two kinds of para-aramid ATY and four kinds of aramid/nylon hybrid ATY with dry and wet treatments. The analyzed physical properties of six specimens (made on the ATY machine) are as follows. The tenacity and initial modulus of aramid and aramid/nylon hybrid ATY decreased with the wetting and breaking strain; however, the yarn linear density of aramid and hybrid ATY increased with wetting treatment. The dry and wet thermal shrinkage of the hybrid ATY increased with wetting. The stability of aramid and hybrid ATY also increased with wetting. The physical properties of core/effect type hybrid ATY showed significantly more change than the core type hybrid ATY and the physical properties of nylon/aramid core/effect hybrid ATY showedsignificantly more change than the of aramid/nylon core/effect hybrid ATY. A higher bulky and breaking strain of hybrid ATY require ATY processing conditions of nylon on the core part with wetting and aramid on the effect part. ATY processing conditions for nylon and aramid on the core part with wetting are required for a higher tenacity and modulus. ATY processing conditions of nylon and aramid on the core with no wetting are required for a low thermal shrinkage.
Abstract
This paper surveys the physical properties of aramid and aramid/nylon hybrid air-jet textured yarns(ATY) for protective garments according to wet and dry texturing conditions. Aramid and nylon filaments were used to make two kinds of para-aramid ATY and four kinds of aramid/nylon hybrid ATY with dry and wet treatments. The analyzed physical properties of six specimens (made on the ATY machine) are as follows. The tenacity and initial modulus of aramid and aramid/nylon hybrid ATY decreased with the wetting and breaking strain; however, the yarn linear density of aramid and hybrid ATY increased with wetting treatment. The dry and wet thermal shrinkage of the hybrid ATY increased with wetting. The stability of aramid and hybrid ATY also increased with wetting. The physical properties of core/effect type hybrid ATY showed significantly more change than the core type hybrid ATY and the physical properties of nylon/aramid core/effect hybrid ATY showedsignificantly more change than the of aramid/nylon core/effect hybrid ATY. A higher bulky and breaking strain of hybrid ATY require ATY processing conditions of nylon on the core part with wetting and aramid on the effect part. ATY processing conditions for nylon and aramid on the core part with wetting are required for a higher tenacity and modulus. ATY processing conditions of nylon and aramid on the core with no wetting are required for a low thermal shrinkage.
참고문헌 (18)
- Acar, M., "An analysis of the air-jet yarn-texturing process part : The effect of wetting the yarns", Journal of The Textile Institute, 77(6), pp.359~370 (1986)
- Acar, M., "The mechanism of the air-jet texturing : The role of wetting, spin finish and friction in forming and fixing loops", Textile Research Journal, 76(2), pp.116~125 (2006)
- Bilgin, S., "Effect of nozzle geometry on air-jet texturing performance", Textile Research Journal, 66(2), pp.83~90 (1996)
- Chand, S., "The role of water in air-jet texturing", Journal of The Textile Institute, 86(3), pp.438~444 (1995)
- Demir, A., "Air-jet textured yarns : The effects of process and supply yarn parameters on the properties of textured yarns", Textile Research Journal, 58(6), pp.318~328 (1988)
- Dani, N., "The fundamentals of air-jet texturing", 박사, pp.2004
- Han, I. S., "Characteristic and application of aramid fiber", Fiber Technology and Industry, 10(4), pp.339~349 (2006)
- Kothari, V. K., "Influence of interfilament friction on structure and properties of air textured yarns", Textile Research Journal, 59(6), pp.317~323 (1989)
- Kothari, V. K., "Role of water in air-jet texturing part: Polyester filament feeder yarns with different frictional characteristics", Textile Research Journal, 61(9), pp.495~502 (1991)
- Kothari, V. K., "Role of water in air-jet texturing part: Nylon 6 yarns conditioned in different environments", Textile Research Journal, 61(10), pp.575~580 (1991)
- Manich, A. M., "The effects of texturing induced microstructural changes on the relaxation behaviour of polyamide 66 multifilament yarns", Fibers and Polymers, 8(5), pp.512~519 (2007)
- Rengasamy, R. S., "Effect of process variables and feeder yarn properties on the properties of core-and-effect and normal air-jet textured yarns", Textile Research Journal, 74(3), pp.259~264 (2004)
- Rengasamy, R. S., "Dynamic friction of polyester air-jet textured yarns", Fibers and Polymers, 6(2), pp.146~150 (2005)
- Sengupta, A. K., "Effect of process variables in air-jet texturing on the properties of spun yarns with different structures", Textile Research Journal, 61(12), pp.729~735 (1991)
- Sengupta, A. K., "Neps in airjet textured yarns", Textile Research Journal, 63(11), pp.637~642 (1993)
- Sengupta, A. K., "Effect of filament modulus and linear density on the properties air-jet textured yarns", Textile Research Journal, 66(7), pp.452~455 (1996)
- Zhang, J., "Investigation on air texturing process for diacetate blending with polyester filaments", Fibers and Polymers, 8(4), pp.427~431 (2007)
- Zhang, J., "Properties of coreand-effect air textured yarns blended by diacetate and polyester filament", Fibers and Polymers, 8(1), pp.84~88 (2007)