Mechanical and Thermal Properties of Industrial Protective Fabric with Recycled m-Aramid and Natural Fiber
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
As consciousness of safety becomes an important social issue, the demand for protective clothing is increasing. Conventional flame-retardant cotton working wear has low durability, and working wear with m-aramid fibers are stiff, heavy, less permeable, and expensive. In this study, recycled m-aramid and cotton have been blended to produce woven fabric of different compositions to enhance high performance and comfort to solve aforementioned problems. The fabrics were analyzed according to constituents and various structural factors. Mechanical properties were measured using KES-FB system. The measured thermal properties are TGA, Qmax, TPP and RPP. Fabric with polyurethane yarn covered by m-aramid/cotton spun yarn is observed to have good wearability. The fabric of open end spun yarn showed more stiffness than that of ring spun yarn. The sample with the high count of yarn has more smooth surface. In addition, high m-aramid content fabric is considered to have relatively high stiffness when using as clothing. In TGA the fabric with higher m-aramid content showed more stable decomposition behavior. The fabric having rough surface showed lower heat transfer properties in Qmax. The influence of the fabric thickness was important in convection and radiant heat test.
Abstract
As consciousness of safety becomes an important social issue, the demand for protective clothing is increasing. Conventional flame-retardant cotton working wear has low durability, and working wear with m-aramid fibers are stiff, heavy, less permeable, and expensive. In this study, recycled m-aramid and cotton have been blended to produce woven fabric of different compositions to enhance high performance and comfort to solve aforementioned problems. The fabrics were analyzed according to constituents and various structural factors. Mechanical properties were measured using KES-FB system. The measured thermal properties are TGA, Qmax, TPP and RPP. Fabric with polyurethane yarn covered by m-aramid/cotton spun yarn is observed to have good wearability. The fabric of open end spun yarn showed more stiffness than that of ring spun yarn. The sample with the high count of yarn has more smooth surface. In addition, high m-aramid content fabric is considered to have relatively high stiffness when using as clothing. In TGA the fabric with higher m-aramid content showed more stable decomposition behavior. The fabric having rough surface showed lower heat transfer properties in Qmax. The influence of the fabric thickness was important in convection and radiant heat test.
참고문헌 (19)
- 송영경, "방염작업복용 직물의 역학 특성 및 쾌적성", 한국섬유공학회지, 53(6), pp.414~420 (2016), 한국섬유공학회
- 정명희, "숯 날염가공한 방호복의 인체생리반응 및 쾌적성 평가", 한국의류학회지, 30(6), pp.981~991 (2006), 한국의류학회
- Y. M. Jeong, "A Study on the Mechanical and Moisture Transfer Properties of Heat-resistant Fabric for Protective Clothing", M.S., pp.1999
- 김삼수, "재활용 메타 아라미드와 TPP 복합용액의 제조 및 면섬유 코팅 후 특성분석", 한국염색가공학회지, 25(4), pp.292~302 (2013), 한국염색가공학회
- 전언, "메타아라미드", Poly(vinyl alcohol) 복합섬유의 제조 및 특성 분석, 2011, pp.48(1), 60~64[DOI]
- J. E. Ha, "Transfer and Mechanical Properties of Materials in Protective Clothing for Welders", M.S., pp.2008
- Y. H. Kuk, "Textile Structural Science", pp.95~ (1994), Hyungseul Publishing
- 배현숙, "산업현장을 고려한 작업복 소재의 역학적 특성 연구", 한국염색가공학회지, 25(2), pp.140~151 (2013), 한국염색가공학회[DOI]
- 김명옥, "워싱가공에 의한 데님직물의 역학적 특성 및 태 변화", 한국생활환경학회지, 16(2), pp.162~171 (2009), 한국생활환경학회
- 권영아, "Effect of UV-Asorber Treatment on the Mechanical Properties of Cotton Fabrics", 한국의류학회지, 26(12), pp.1701~1708 (2002), 한국의류학회
- Y. K. Song, "Mechanical and Thermal Properties of Industrial Flame Retardant Fabrics with Recycled Aramid", M.S., pp.2017
- J. Skelton, "Fundamentals of Fabric Shear", Textile Research J, 46, pp.862~ (1976)
- Y. H. Jeon, "The Mechanical and Transport Properties of High Functional Circular Knitting Fabrics and Laminated Materials for Industrial Reinforcement", Ph.D., pp.2014
- H. J. Na, "A Study on the Physical Properties and Hand Value of Nano Ag-treated Fabrics", M.S., pp.2005
- 지주원, "대나무 편성물의 물성변화", 한국섬유공학회지, 44(4), pp.238~243 (2007), 한국섬유공학회
- A. G. Oh, "Study onMechanical Properties of PolyesterWoven Fabric(Ⅳ)-Compressional Properties", Textile Science and Engineering, 31, pp.361~ (1994)
- 현재민, "THPC-urea", 암모니아 큐어링에 의한 면직물의 방염가공, 2016, pp.53(6), 434~441[DOI]
- B. H. Son, "A Study on Heat and Moisture Transport Properties of Vapor-Permeable Waterproof Finished Fabric for SportsWear", M.S., pp.2000
- "ISO 9151, Protective Clothing against Heat and Flame Determination of Heat Transmission on Exposure to Flame", The International Organization for Standardization, ~ (2012)