3D 프린터를 이용한 여성용 인대 제작 연구
A study of making a dress form for women using a 3D printer
0
조회
0
다운로드
9
인용
0
참고문헌
키워드
초록
In the Korean fashion industry, 3D printing systems are considered as new technology and a new opportunity. With 3D printers, consumers can be manufacturers and individuals can develop businesses with little upfront capital. In this study, a dress form for the typical Korean women’s body shape was developed using 3D technology (3D scanning, 3D modeling, and 3D printing). Ten women with apparel sizes 85-91-160 were selected from 3D body-scan data collected by SizeKorea of 201 women aged 25 to 34 (2010). First, 15 horizontal cross-sections were collected from the 3D scan data of the 10 subjects. Then, inside lines of those cross-sections were drawn at 15-degree intervals, and the lengths were measured. The average of the inside lines was connected to the internal spline curve, and the curves were used as the average cross-sections. The average torso body and the dress form of Korean women were developed into a 3D solid model using a 3D CAD program (Solidworks 2012). An output mockup was printed by the FDM type’s 3D printing system (Bonbot 1200, Bonbot 3-H4) using PLA material. The dimensions comparing the 3D solid modeling to the 3D printed mockup of the dress form were measured, and minor differences were between 0.00cm and 0.40cm. In the future, 3D printing systems are expected to be in use for various personalized dress forms.
Abstract
In the Korean fashion industry, 3D printing systems are considered as new technology and a new opportunity. With 3D printers, consumers can be manufacturers and individuals can develop businesses with little upfront capital. In this study, a dress form for the typical Korean women’s body shape was developed using 3D technology (3D scanning, 3D modeling, and 3D printing). Ten women with apparel sizes 85-91-160 were selected from 3D body-scan data collected by SizeKorea of 201 women aged 25 to 34 (2010). First, 15 horizontal cross-sections were collected from the 3D scan data of the 10 subjects. Then, inside lines of those cross-sections were drawn at 15-degree intervals, and the lengths were measured. The average of the inside lines was connected to the internal spline curve, and the curves were used as the average cross-sections. The average torso body and the dress form of Korean women were developed into a 3D solid model using a 3D CAD program (Solidworks 2012). An output mockup was printed by the FDM type’s 3D printing system (Bonbot 1200, Bonbot 3-H4) using PLA material. The dimensions comparing the 3D solid modeling to the 3D printed mockup of the dress form were measured, and minor differences were between 0.00cm and 0.40cm. In the future, 3D printing systems are expected to be in use for various personalized dress forms.
참고문헌 (22)
- "3D printer"[URL]
- 최영림, "스티로폼 보드를 이용한 연구용 재현바디 제작 방법 연구", 한국의류산업학회지, 10(5), pp.713~720 (2008), 한국의류산업학회
- Jin, S. -Y., "A study on the development of the model of design-business using 3D printing", doctor, pp.2015
- (2016)[URL]
- 김혜은, "3D 프린팅 기술의 발달로 인한 패션 산업 변화 연구", 한국패션디자인학회지, 15(4), pp.17~33 (2015), 한국패션디자인학회[DOI]
- (2007)[URL]
- 김효숙, "패션분야의 3D 프린팅 활용 현황에 관한 연구", 한국의상디자인학회지, 17(2), pp.125~143 (2015), 한국의상디자인학회
- Kim, J. H., "Development of foot-measuring toolkit and modeling process for designing customized round toe midsole with 3D printing technology", master, pp.2015
- 김수아, "3차원 인체 형상을 이용한 실버 여성 패션 산업용 인대 모형 개발", 복식문화연구, 18(1), pp.80~92 (2010), 복식문화학회
- (2016)[URL]
- "Korean Agency for Technology and Standards", Korean Agency for Technology and Standards, ~ (2005)
- Korean Agency for Technology and Standards, "KS K 0051;2009 Sizing systems for female adult's garments", Korean Agency for Technology and Standards, ~ (2005)
- "Trade Brief", 2014, 1~12
- 이종석, "FDM 3D 프린팅을 활용한 패션디자인 개발에 관한 연구", 한국패션디자인학회지, 16(1), pp.101~115 (2016), 한국패션디자인학회[DOI]
- Lee, W. M., "Solidworks 2014 basic for engineer & 3D printing" (2014), Mechapia
- (2016)[URL]
- 오설영, "3D 발 스캐너와 3D 프린터를 이용한 남성화 라스트 설계", 한국콘텐츠학회 논문지, 16(2), pp.186~199 (2016), 한국콘텐츠학회[DOI]
- Pack, B. S., "The study about the development of efficient multi-module 3D printer design", master, pp.2015
- 박진아, "국내 여성 패션모델의 3차원 가상인체 모델링을 통한 토르소형 인대 개발과 그 특성 분석", 복식, 65(2), pp.157~175 (2015), 한국복식학회[DOI]
- (2016)[URL]
- Song, H. -K., "The comparison of shape in dress form and the human body, using a 3-D whole body scanner", master, pp.2004
- 송화경, "인대와 피팅모델의 직접계측치 비교에 의한 형태파악 연구", 복식, 54(7), pp.1~14 (2004), 한국복식학회