3D 디지털 기술을 활용한 시니어 남성 기성복 피팅용 드레스폼 개발에 관한 연구
A Study of Senior Men's Dress Form Development 3D Digital Technology
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
This study was to develop a dress form that is highly representative of the body shapes of senior men in their 50s and 60s. And this research was compared the measurements and forms of three different dress forms available in the market, in order to analyze the body type and suitability and provide a standard for developing and utilizing the dress forms. After extracting the body shapes of the senior men’s 3D shape, the body type that is curvature on the back prevalent among senior men, was chosen. The dress form was created as follows: 3D modeling and rendering, printing with a FDM-type 3D printer. The dress forms were 3D-scanned and the 3D data was analyzed – classification drop value, area deviation, compared horizontal section and vertical section. The results were as follows: This suggested that the area deviation amount at the chest and hip circumference levels was larger in the commercial products than in the dress form in this study, while that at the waist circumference level was larger in the dress form in this study. The vertical length of the lateral shoulder point-waist circumference was smaller, the side shape showed severe curvature on the back, and the waist circumference was larger in the senior men dress form than the commercial products. The dress form developed in this study reflected the body type of senior men and, therefore, were suitable for fitting when creating clothes for senior men.
Abstract
This study was to develop a dress form that is highly representative of the body shapes of senior men in their 50s and 60s. And this research was compared the measurements and forms of three different dress forms available in the market, in order to analyze the body type and suitability and provide a standard for developing and utilizing the dress forms. After extracting the body shapes of the senior men’s 3D shape, the body type that is curvature on the back prevalent among senior men, was chosen. The dress form was created as follows: 3D modeling and rendering, printing with a FDM-type 3D printer. The dress forms were 3D-scanned and the 3D data was analyzed – classification drop value, area deviation, compared horizontal section and vertical section. The results were as follows: This suggested that the area deviation amount at the chest and hip circumference levels was larger in the commercial products than in the dress form in this study, while that at the waist circumference level was larger in the dress form in this study. The vertical length of the lateral shoulder point-waist circumference was smaller, the side shape showed severe curvature on the back, and the waist circumference was larger in the senior men dress form than the commercial products. The dress form developed in this study reflected the body type of senior men and, therefore, were suitable for fitting when creating clothes for senior men.
참고문헌 (19)
- 최영림, "스티로폼 보드를 이용한 연구용 재현바디 제작 방법 연구", 한국의류산업학회지, 10(5), pp.713~720 (2008), 한국의류산업학회
- Chang, H. K., "The need of draping dress form for fashion design", Fashion Information and Technology, 13, pp.81~85 (2016)
- 도월희, "시니어 남성용 드레스폼 개발을 위한 국내외 시판 드레스폼의 제품 및 치수체계 조사", 한국의류산업학회지, 18(5), pp.708~715 (2016), 한국의류산업학회
- 도월희, "시니어 남성의 기성복 피팅용 드레스폼 개발을 위한 상반신 체형분류", 한국의류산업학회지, 19(6), pp.804~812 (2017), 한국의류산업학회[DOI]
- 도월희, "시니어 남성용 드레스폼 개발을 위한 정장착의 실태조사", 한국의류산업학회지, 20(3), pp.304~311 (2018), 한국의류산업학회[DOI]
- 김효숙, "시니어 여성을 위한 팬츠 패턴 연구", 기초조형학연구, 18(3), pp.67~84 (2017), 한국기초조형학회
- 김수아, "3차원 인체 형상을 이용한 실버 여성 패션 산업용 인대 모형 개발", 복식문화연구, 18(1), pp.80~92 (2010), 복식문화학회[DOI]
- 구미지, "20대 여성의 표준체형과 인대 적합성에 관한 연구", 한국의류산업학회지, 7(6), pp.601~608 (2005), 한국의류산업학회
- (2005)[URL]
- 이응석, "시니어 의류 브랜드의 광고모델 유형에 따른 여성 소비자 반응 연구", 복식문화연구, 24(1), pp.93~106 (2016), 복식문화학회[DOI]
- Lee, J. I., "Technical sourcebook for designers" (2012), Sigmapress
- 박진아, "국내 여성 패션모델의 3차원 가상인체 모델링을 통한 토르소형 인대 개발과 그 특성 분석", 복식, 65(2), pp.157~175 (2015), 한국복식학회[DOI]
- Sin, S. J., "Study of representative type and dress form of men’s lower body in forties by using 3-dimensional scan data", master’s, pp.2005
- "The 6th Size Korea 3-dimensional anthropometric report" (2010)[URL]
- "Korean Agency for Technology and Standards" (2009)[URL]
- Song, H. W., "A third industrial revolution 3D printing", Korean Industrial Chemistry News, 18(1), pp.27~44 (2015)
- 유현, "패턴메이킹을 위한 남성 인대개발에 관한 연구", 패션 비즈니스, 10(5), pp.159~179 (2006), 한국패션비즈니스학회
- Yoon, M. K., "Technical fitting management", Fashion Information and Technology, 13, pp.11~22 (2016)
- "2014 Statistics on the Aged" (2014)[URL]