본문 바로가기
KERD
논문KCI 등재

암모니아의 특성에 따른 활용 현황과 부식 손상에 대한 고찰

A Study on the Utilization Status and Corrosion Damage with Ammonia Characteristics

이승준
한국표면공학회 (The Korean Society of Surface Science and Engineering)|2023.04|한국표면공학회지 (Journal of Surface Science and Engineering)|제56권 제2호|pp. 125-136|DOI 10.5695/JSSE.2023.56.2.125

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

AmmoniaCorrosionToxicCarbon freeStress corrosion cracking.
주제분류기계공학

초록

Recently, ammonia has emerged as an alternative energy source that can reduce carbon emissions in various industries. Ammonia is used as a fuel in internal combustion engines because it contains no carbon in its components and does not emit any carbon when burned. It is also used in various fields such as fertilizer production, refrigeration, cleaning and disinfection, and drug manufacturing due to its unique characteristics, such as high volatility and easy solubility in water. However, it is highly corrosive to metals and is a toxic gas that can pose a risk to human health, so caution must be exercised when using it. In particular, stress corrosion cracking may occur in containers or manufacturing facilities made of carbon-manganese steel or nickel steel, so special care is needed. As ammonia has emerged as an alternative fuel for reducing carbon emissions, there is a need for a rapid response. Therefore, based on a deep understanding of the causes and mechanisms of ammonia corrosion, it is important to develop new corrosion inhibitors, improve corrosion monitoring and prediction systems, and study corrosion prevention design.

Abstract

Recently, ammonia has emerged as an alternative energy source that can reduce carbon emissions in various industries. Ammonia is used as a fuel in internal combustion engines because it contains no carbon in its components and does not emit any carbon when burned. It is also used in various fields such as fertilizer production, refrigeration, cleaning and disinfection, and drug manufacturing due to its unique characteristics, such as high volatility and easy solubility in water. However, it is highly corrosive to metals and is a toxic gas that can pose a risk to human health, so caution must be exercised when using it. In particular, stress corrosion cracking may occur in containers or manufacturing facilities made of carbon-manganese steel or nickel steel, so special care is needed. As ammonia has emerged as an alternative fuel for reducing carbon emissions, there is a need for a rapid response. Therefore, based on a deep understanding of the causes and mechanisms of ammonia corrosion, it is important to develop new corrosion inhibitors, improve corrosion monitoring and prediction systems, and study corrosion prevention design.

참고문헌 (84)

  1. P. Dimitriou, "A review of ammonia as a compression ignition engine fuel", Int. J. Hydrogen Energy, 45, pp.7098~7118 (2020)
  2. A. Pearson, "Refrigeration with ammonia", Int. J. Refrig, 31, pp.545~551 (2008)
  3. A. A. Lima, "Absorption refrigeration systems based on ammonia as refrigerant using different absorbents : review and applications", Energies, 14, pp.48~ (2020)
  4. R. K. Dreepaul, "A study of alternative refrigerants for the refrigeration and air conditioning sector in mauritius", Earth Environ. Sci, 93, pp.012054~ (2017)
  5. S. J. Benson, "Forensic analysis of explosives using isotope ratio mass spectrometry(IRMS)— discrimination of ammonium nitrate sources", Sci. Justice, 49, pp.73~80 (2009)
  6. G. Chehade, "Progress in green ammonia production as in green ammonia production as potential carbon-free fuel", Fuel, 299, pp.120845~ (2021)
  7. J. Guo, "Catalyst : NH3 as an Energy Carrier", Chem, 3, pp.709~712 (2017)
  8. F. Chang, "Emerging materials and methods toward ammonia-based energy storage and conversion", Adv. Mater, 33, pp.2005721~ (2021)
  9. W. S. Chai, "A review on ammonia, ammoniahydrogen and ammonia-methane fuels", Renewable Sustainable Energy Rev, 147, pp.111254~ (2021)
  10. C. Zou, "The role of new energy in carbon neutral", Pet. Explor. Dev, 48, pp.411~420 (2021)
  11. M. Sonachalam, "Emission reduction in diesel engine with acetylene gas and biodiesel using inlet manifold injection", Clean Technol. Environ. Policy, 22, pp.2177~2191 (2020)
  12. M. Sonachalam, "Impact of secondary fuel injector in various distance on direct injection diesel engine using acetylene-bio diesel in reactivity controlled compression ignition mode, Energy Sources Part A Recovery Util", Environ. Eff, 22, pp.1810177~ (2020)
  13. X. Xu, "Review of the current status of ammonia-blended hydrogen fuel engine development", Energies, 15, pp.1023~ (2022)
  14. M. C. Chiong, "Challenges and opportunities of marine propulsion with alternative fuels, Renew Sustain", Energy Rev, 149, pp.111397~ (2021)
  15. F. Y. A. Aboosi, "Renewable ammonia as an alternative fuel for the shipping industry", Curr. Opin. Chem. Eng, 31, pp.100670~ (2021)
  16. Carbon Free Fuel: Ammonia Policy and Industry Trends, , Korea Institute of Energy Research, ~, pp.Korea Institute of Energy Research Climate Technology Brief No.42 (2021)
  17. A. Klerke, "Ammonia for hydrogen storage : challenges and opportunities", J. Mater. Chem, 18, pp.2304~ (2008)
  18. G. Chehade, "Progress in green ammonia production as potential carbon-free fuel", Fuel, 299, pp.120845~ (2021)
  19. H. Zhang, "Techno-economic comparison of green ammonia production processes", Appl. Energy, 259, pp.114135~ (2020)
  20. A. Sánchez, "Optimal renewable production of ammonia from water and air", J. Clean. Prod, 178, pp.325~342 (2018)
  21. A. V. Medina, "Ammonia for power", Prog. Energy Combust. Sci, 69, pp.63~102 (2018)
  22. O. Siddiqui, "Development and performance evaluation of a direct ammonia fuel cell stack", Chem. Eng. Sci, 200, pp.285~293 (2019)
  23. J. Sun, "A hybrid plasma electrocatalytic process for sustainable ammonia production", Energy Environ. Sci, 14, pp.865~872 (2021)
  24. S. Giddey, "Review of electrochemical ammonia production technologies and materials", Int. J. Hydrogen Energy, 38, pp.14576~14594 (2013)
  25. H. Shen, "Electrochemical ammonia synthesis: mechanistic", ~
  26. H. Shen, "Electrochemical ammonia synthesis : mechanistic understanding and catalyst design", Inside Chem, 7, pp.1708~1754 (2021)
  27. M. Negovanovic, "Ammonium nitrate explosion hazards", Undergr. Min. Eng, 27, pp.49~63 (2015)
  28. X. Vecino, "Liquid fertilizer production by ammonia recovery from treated ammonia-rich regenerated streams using liquid-liquid membrane contactors", J. Chem. Eng, 360, pp.890~899 (2019)
  29. M. Montazer, "Synthesis of nanosilver on polyamide fabric using silver", ammonia complex, 2014, pp.38, 170~176
  30. J. Yang, "Electrochemical synthesis of ammonia in molten salts", J. Energy Chem, 43, pp.195~207 (2020)
  31. A. E. Yüzbaşıoğlu, "The current situation in the use of ammonia as a sustainable energy source and its industrial potential", Curr. Opin. Green Sustain. Chem, 5, pp.100307~ (2022)
  32. A. V. Medina, "Review on ammonia as a potential fuel : from synthesis to economics", Energy Fuels, 35, pp.6964~7029 (2021)
  33. S. Ghavam, "Sustainable ammonia production processes", Front. Energy Res, 9, pp.580808~ (2021)
  34. M. Ozturk, "An integrated system for ammonia production from renewable hydrogen : a case study", Int. J. Energy, 46, pp.5918~5925 (2021)
  35. N. L. Trivyza, "Safety and reliability analysis of an ammonia-powered fuelcell system", Safety, 7, pp.80~ (2021)
  36. D. Chang, "A study on availability and safety of new propulsion systems for LNG carriers", Reliab. Eng. Syst. Saf, 93, pp.1877~1885 (2008)
  37. V. Radmehr, "Ammonia leaching : a new approach of copper industry in hydrometallurgical Processes", J. Inst. Eng. (India) : D, 94, pp.95~104 (2013)
  38. A. C. Grosse, "Leaching and recovery of gold using ammoniacal thiosulfate leach liquors(a review)", Hydrometallurgy, 69, pp.1~21 (2003)
  39. Y. Ma, "A promising selective recovery process of valuable metals from spent lithium ion batteries via reduction roasting and ammonia leaching", J. Hazard. Mater, 402, pp.123491~ (2021)
  40. S. M. Shin, "Development of a metal recovery process from Li-ion battery wastes", Hydrometallurgy, 79, pp.172~181 (2005)
  41. B. Ogilvie, "Alcohol-free hand sanitizer and other quaternary ammonium disinfectants quickly and effectively inactivate SARS-CoV-2", J. Hosp. Infect, 108, pp.142~145 (2021)
  42. C. P. Gerba, "Quaternary ammonium biocides: efficacy in application", Appl. Environ. Microbiol, 81, pp.02633~02614 (2015)
  43. D. Wu, "Mesophilic bio-liquefaction of lincomycin manufacturing biowaste : The influence of total solid content and inoculum to substrate ratio", Bioresour. Technol, 102, pp.5855~5862 (2011)
  44. M. Montazer, "Synthesizing and stabilizing silver nanoparticles on polyamide fabric using silver-ammonia", PVP, Prog. Org. Coat, pp.2012, 75[DOI]
  45. C. Loftus, "Ambient ammonia exposures in an agricultural community and pediatric asthma morbidity", Epidemiol, 26, pp.794~801 (2015)
  46. T. Li, "Gas-permeable membrane-based conductivity probe capable of in situ real-time monitoring of ammonia in aquatic environments", Environ. Sci. Technol, 51, pp.13265~13273 (2017)
  47. E. Stokstad, "Ammonia pollution from farming may exact hefty health costs", Science, 343, pp.238~ (2014)
  48. S. J. Zeng, "Applications and perspectives of NH3 separation and recovery with ionic liquids", Chin. J. Chem. Eng, 70, pp.10~ (2019)
  49. X. Xu, "Removal of ammonia b y a b s o r p t i o n c o m b i n e d w i t h electrochemical oxidation on RuO2", Ti anode, 2016, pp.67, 7~
  50. S. Dasarathy, "Ammonia toxicity : from head to toe?", Metab. Brain Dis, 32, pp.529~538 (2017)
  51. K. R. Prasun, "Consequence and risk assessment : case study of an ammonia storage facility", Arch. Environ. Sci, 5, pp.25~36 (2011)
  52. C. Hassan, "A case study of consequences analysis of ammonia transportation by rail from Gurun to Port Klang in Malaysia using safety computer Model", J. Saf. Health Environ. Res, 6, pp.1~19 (2009)
  53. S. Giddey, "Review of electrochemical ammonia production technologies and materials", Int. J. Hydrog. Energy, 38, pp.14576~14594 (2013)
  54. P. Jha, "Charge transport and ammonia sensing properties of flexible polypyrrole nanosheets grown at air–liquid interface", Mater. Chem. Phys, 40, pp.300~306 (2013)
  55. X. Feng, "Methanol-ammonia and the new energy economy", pp.60~62 (2010), Chem. Ind. Press
  56. D. A. Jones, "Corrosion performance of some metals and alloys in liquid ammonia", Corrosion, 33, pp.46~50 (1977)
  57. N. Anjana, "Toxic hazards of ammonia release and population vulnerability assessment using geographical information system", J. Environ. Manage, 210, pp.201~209 (2018)
  58. D. Strmčnik, "Copper Dissolution in Ammonia Solutions : Identification of the Mechanism at Low Overpotentials", J. Electrochem. Soc, 156, pp.3123289~ (2009)
  59. G. Jennings, "Selfassembled monolayers of alkanethiols on copper provide corrosion resistance in aqueous environments, Colloids and Surfaces A: Physicochemical and on copper provide corrosion resistance in aqueous environments", Colloids Surf. A Physicochem. Eng. Asp, 116, pp.105~114 (1996)
  60. "Guidelines for Ships Using Ammonia as Fuels", Korean Register, ~ (2021)
  61. P. Shi, "Corrosion behavior of bulk nanocrystalline copper in ammonia solution", Mater. Lett, 65, pp.857~859 (2011)
  62. E. Pugh, "Stress-corrosion cracking of copper", Corros. Sci, 6, pp.345~346 (1966)
  63. H. H. Uhlig, "Alleged stresscorrosion cracking of pure Cu", Corros. Sci, 9, pp.557~558 (1969)
  64. E. Escalante, "Stress corrosion cracking of pure copper", J. Electrochem. Soc, 118, pp.2408247~ (1971)
  65. F. I. Danilov, "Nanocrystalline hard chromium electrodeposition from trivalent chromium bath containing carbamide and formic acid: Structure, composition, electrochemical corrosion behavior, hardness and wear characteristics of deposits", Appl. Surf. Sci, 257, pp.8048~ (2011)
  66. H. H. Sheu, "Improve the mechanical properties and wear resistance of Cr-C thin films by adding Al2O3 particles", Surf. Coat. Technol, 350, pp.1036~ (2018)
  67. A. Liang, "Preparation of crystalline chromium coating on cu substrate directly by DC electrodepositing from wholly environmentally acceptable Cr(III)electrolyte", Mater. Lett, 119, pp.131~ (2014)
  68. K. S. Nam, "Improved wear and corrosion resistance of chromium(III)plating by oxynitrocarburising and steam oxidation", Mater. Lett, 58, pp.3540~ (2004)
  69. O. de Sanctis, "Behaviour in hot ammonia atmosphere of SiO2-coated stainless steels produced by a sol-gel procedure", Surf. Coat. Technol, 70, pp.251~255 (1995)
  70. H. Ma, "NH3probing of the surface acidity of passive films on chromium", Corros. Sci, 44, pp.171~178 (2002)
  71. G. Bouyssoux, "XPS and AES studies of anodic passive films grown on chromium electrodes in sulphuric acid baths", J. Electron. Spectrosc. Relat. Phenom, 11, pp.185~196 (1977)
  72. M. Seo, "Ellipsometry and Auger Analysis of Chromium Surfaces Passivated in Acidic and Neutral Aqueous Solutions", J. Electrochem. Soc, 127, pp.1909~ (1980)
  73. S. Haupt, "The analysis of dissolved Cr3+with the rotating ringdisc technique and its application to the corrosion of Cr in the passive state", J. Electroanal. Chem, 216, pp.229~240 (1987)
  74. S. Haupt, "The formation of the passive layer on Cr in 0. 5 M H2SO4 A combined electrochemical and surface analytical study", J. Electroanal. Chem, 228, pp.365~392 (1987)
  75. T. P. Moffat, "An electrochemical and X-ray photoelectron spectroscopy study of the passive state of chromium", J. Electrochem. Soc, 139, pp.1869~ (1992)
  76. T. P. Moffat, "Electron-transfer reactions on passive chromium", J. Electrochem. Soc, 139, pp.3158~ (1992)
  77. C. A. Melendres, "Surface enhanced raman spectroelectrochemical studies of the corrosion films on iron and chromium in aqueous solution environments", Electrochim. Acta, 37, pp.2747~2754 (1992)
  78. V. Maurice, "XPS and STM investigation of the passive film formed on Cr(110)singlecrystal surfaces", J. Electrochem. Soc, 141, pp.3016~ (1994)
  79. L. Oblonsky, "A surface enhanced raman spectroscopic study of the passive films formed in borate buffer on iron, nickel, chromium and stainless steel", Corros. Sci, 37, pp.17~41 (1995)
  80. D. Zuili, "In situ scanning tunneling microscopy study of the structure of the hydroxylated anodic oxide film formed on Cr(110)single-crystal surfaces", J. Phys. Chem. B, 103, pp.7896~7905 (1999)
  81. M. M. Hukovic, "P-type and n-type behavior of chromium oxide as a function of the applied potential", J. Electrochem. Soc, 134, pp.2193~ (1987)
  82. C. Sunseri, "Photocurrent spectroscopic investigations of passive films on chromium", J. Electrochem. Soc, 137, pp.2411~ (1990)
  83. P. C. Searson, "A photoelectrochemical study of the passive film on chromium", Electrochim. Acta, 35, pp.445~450 (1990)
  84. M. Bojinov, "Conduction mechanism of the anodic film on chromium in acidic sulphate solutions", Electrochim. Acta, 44, pp.247~261 (1998)

관련 논문AI추천

선박 연료배관용 St37.4 탄소강의 암모니아 농도에 따른 부식 특성이도빈, 이승준한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2022 · 제21권 제6호수송/저장용 수소 생산 확대를 위한 암모니아의 안전 위험 관리 표준 동향봉성율, 이창현, 이혁주, 주형국한국표면공학회 · 한국표면공학회지2023 · 제56권 제6호탄소중립을 위한 암모니아 연소기술의 연구개발 필요성 - Part Ⅱ 연구개발 동향과 기술적 타당성 분석우영민, 이민정, 이후경한국연소학회 · 한국연소학회지2021 · 제26권 제1호탄소중립을 위한 암모니아 연소기술의 연구개발 필요성 - Part Ⅰ 연료 암모니아의 보급확대 배경과 경제성우영민, 이민정, 이후경한국연소학회 · 한국연소학회지2021 · 제26권 제1호암모니아 가스터빈 연소기술의 연구 동향이준, 김규태, 진욱화한국연소학회 · 한국연소학회지2024 · 제29권 제1호암모니아 환경에서 선박 엔진용 고무 소재의 열화 특성 및 영구압축줄음율 평가박진영, 이승준, 임성진한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2024 · 제23권 제6호

이 간행물의 다른 논문 (5건)

국부적 양극산화 기술 동향최수민, 나윤채, 강광모pp. 115-124양극산화 조건에 따른 이산화티타늄 나노튜브의 광촉매 및 광전기화학적 특성정린, 이재원, 이기영, 유정은, 김연진pp. 137-146ZnO/Ti/ZnO 박막의 결정성 및 전기광학적 완성도 개선 연구김대욱, 김유성, 최진영, 김대일, 이인식, 차병철, 이연학, 장진규, 공영민pp. 147-151야간 시인성 확보를 위한 희토류 첨가 고내구성 장잔광 축광도료 제조에 관한 연구노윤석, 김종기, 최용욱, 이진호, 우은석pp. 152-159스트레처블 배선용 저저항 알루미늄-몰리브데늄 합금에 대한 연구최재익, 김건호, 박수연, 서종현, 이민준, 배진원pp. 160-168
원문 보기