탄소중립을 위한 암모니아 연소기술의 연구개발 필요성 - Part Ⅱ 연구개발 동향과 기술적 타당성 분석
The Needs for R&D of Ammonia Combustion Technology for Carbon Neutrality - Part Ⅱ R&D Trends and Technical Feasibility Analysis
0
조회
0
다운로드
17
인용
0
참고문헌
키워드
초록
Following the previously published Part 1, the Part 2 focuses on the basic combustion characteristics of fuel ammonia and research cases of applied combustion technology. In addition, we would like to review the items necessary for a large-scale demonstration of ammonia combustion technology. Most of the technologies for utilizing ammonia combustion are being carried out in Japan and are strongly promoted by policy. The results give a method of stabilizing flame and reducing nitrogen oxides when mixed burning of ammonia, and are applied to automobile engine, marine engine, gas turbine, coal-fired boiler, reheating furnace, and fuel cell. The co-burning rate, which is advantageous for stabilizing combustion and reducing nitrogen oxides, has been derived, and accordingly, the use of ammonia as a carbon-free fuel for the future is brightly expected.
Abstract
Following the previously published Part 1, the Part 2 focuses on the basic combustion characteristics of fuel ammonia and research cases of applied combustion technology. In addition, we would like to review the items necessary for a large-scale demonstration of ammonia combustion technology. Most of the technologies for utilizing ammonia combustion are being carried out in Japan and are strongly promoted by policy. The results give a method of stabilizing flame and reducing nitrogen oxides when mixed burning of ammonia, and are applied to automobile engine, marine engine, gas turbine, coal-fired boiler, reheating furnace, and fuel cell. The co-burning rate, which is advantageous for stabilizing combustion and reducing nitrogen oxides, has been derived, and accordingly, the use of ammonia as a carbon-free fuel for the future is brightly expected.
참고문헌 (49)
- 2030 국가 온실가스 감축목표(NDC), , 대한민국정부, ~ (2020)
- 2020년 국가 온실가스 인벤토리(1990-2018), , 환경부 온실가스종합정보센터, ~ (2020)
- H. Kobayashi, "Science and technology of ammonia combustion", Proc. Combust. Inst, 37, pp.109~133 (2019)
- A. Hayakawa, "Experimental investigation of stabilization and emission characteristics of ammonia", air premixed flames in a swirl combustor, 2017, pp.42, 14010~14018
- A. Hayakawa, "Laminar burning velocity and Markstein length of ammonia", air premixed flames at various pressures, 2015, pp.159, 98~106
- K. Takizawa, "Burning velocity measurements of nitrogencontaining compounds", J. Hazard. Mater, 155, pp.144~152 (2008)
- U. Pfahl, "and flame speeds in H2-CH4-NH3-N2O-O2-N2 mixtures", Combust. Flame, 123, pp.140~158 (2000)
- R. Ichimura, "Extinction limits of an ammonia", air flame propagating in a turbulent field, 2019, pp.246, 178~186
- Y. Xia, "Turbulent burning velocity of ammonia", oxygen, Fuel, pp.2020, 268[DOI]
- C. Lhuillier, "Experimental investigation on laminar burning velocities of ammonia", hydrogen, Fuel, pp.2020, 263[DOI]
- A. Ichikawa, "Laminar burning velocity and Markstein length of ammonia", hydrogen, Int. J. Hydrogen Energ, pp.2015, 40[DOI]
- C. Lhuillier, "Experimental investigation on ammonia combustion behavior in a spark-ignition engine by means of laminar and turbulent expanding flames", Proc. Combust. Inst., 38 (2020)
- S. Filatyev, "Measured properties of turbulent premixed flames for model assesment, including burning velocities, stretch rates, and surface densities", Combust. Flame, 141, pp.1~21 (2005)
- J. Jang, "Carbon-free fuel for greenhouse gas reduction – Ammonia(NH3)", J. Korean Society of Automotive Engineers, 42, pp.52~55 (2020)
- P. Dimitriou, "A review of ammonia as a compression ignition engine fuel", Int. J. Hydrogen Energ, 45, pp.7098~7118 (2020)
- C. Morch, "Ammonia", hydrogen mixtures in an SIengine : Engine performance and analysis of a proposed fuel system, 2011, pp.90, 854~864
- S. Frigo, "Analysis of the behaviour of a 4-stroke Si engine fuelled with ammonia and hydrogen", Int. J. Hydrogen Energ, 38, pp.1607~1615 (2013)
- E. Kroch, "Ammonia-A fuel for motor buses", J. Inst. Pet. (1945)
- A. Reiter, "Combustion and emissions characteristics of compression-ignition engine using dual ammonia-diesel fuel", Fuel, 90, pp.87~97 (2011)
- C. Gross, "Performance characteristics of a compression-ignition engine using direct-injection ammonia-DME mixtures", Fuel, 103, pp.1069~1079 (2013)
- S. Grannell, "The operating features of a stoichiometric, ammonia and gasoline dual fueled spark ignition engine", Ph.D., pp.2008
- 장진영, "1리터급 엔진을 이용한 암모니아-가솔린 혼소 성능 특성", 한국가스학회지, 19(6), pp.1~7 (2015), 한국가스학회[DOI]
- A. Valera-Medina, "Ammonia for power", Prog. Energ. Combust, 69, pp.63~102 (2018)
- 친환경 미래 선박 연료 전망: 선박연료로써의 암모니아, , 한국선급, ~ (2019)
- 2030 한국형 친환경선박(Greenship-K) 추진전략-제1차 친환경선박 개발·보급 기본계획(’21~’30), , 관계부처합동, ~ (2020)
- E. Bouman, "and potential for reducing GHG emissions from shipping – A review", Transp. Res. Part D, 52, pp.408~421 (2017)
- A. Boretti, "Novel heavy duty engine concept for operation dual fuel H2-NH3", Int. J. Hydrogen Energ, 37, pp.7869~7876 (2012)
- 수소경제 활성화 로드맵, , 관계부처합동, ~ (2019)
- M. Uchida, "Performance of ammonia", natural gas co-fired gas turbine with two-stage combustor, 2019, ~
- M. Nose, "Development of ammonia utilization technology for large gas turbines for power generation", J. Combust. Japan, 61, pp.293~298 (2019)
- 제9차 발전수급기본계획, , 산업통상자원부, ~ (2020)
- T. Ito, "New technology of the ammonia co-firing with pulverized coal to reduce the NOx emission", NH3 Fuel Conference (2019)
- J. Zhang, "Numerical investigation on ammonia co-firing in a pulverized coal combustion facility : Effect of ammonia co-firing ratio", Fuel, 267, pp.117166~ (2020)
- S. Ishihara, "Numerical calculation with detailed chemistry on ammonia co-firing in a coal-fired boiler : Effect of ammonia co-firing ratio on NO emissions", Fuel, 274, pp.117742~ (2020)
- A. Yamamoto, "Basic co-firing characteristics of ammonia with pulverized coal in a single burner test furnace", NH3fuel conference (2018)
- M. Tamura, "Experimental investigation of ammonia combustion in a bench scale 1. 2MW-thermal pulverised coal firing furnace", Appl. Energ, 277, pp.115580~ (2020)
- The Chugoku Electric Power, "Test results of the ammonia mixed combustion at Mizushima power station unit no. 2 and related patent applications", AIChE Annual Meeting (2018)
- T. Yoshizaki, "Test of the co-firing of ammonia and coal at Mizushima power station", J. Combust. Japan, 61, pp.309~312 (2019)
- H. Tanigawa, "Ammonia mixed burning test at Mizushima power plant unit 2 – Evaluation of the feasibility of using ammonia for power generation", Electric Review, 4, pp.52~55 (2018)
- Y. Xia, "Effect of ammonia", oxygen, ammonia co-combustion, pp.Proc. Combust. Inst., 2020[DOI]
- K. Hadi, "Effect of fuel ratio of coal on the turbulent flame speed of ammonia", coal particle cloud co-combustion at atmospheric pressure, 2020, pp.38, ~
- N. Nakatsuka, "Detailed observation of coal-ammonia co-combustion processes", NH3 Fuel Conference (2017)
- H. Lee, "An observation of combustion behavior of a single coal particle entrained into hot gas flow", Combust. Flame, 162, pp.2610~2620 (2015)
- H. Lee, "Motion of single pulverized coal particles in a hot gas flow field", Combust. Flame, 169, pp.63~71 (2016)
- H. Lee, "Volatile flame visualization of single pulverized fuel particles", Powder Technol, 333, pp.353~363 (2018)
- R. Murai, "Review of fundamental study on ammonia direct combustion in industrial furnaces", J. Combust. Japan, 61, pp.320~325 (2019)
- M. Numata, "Development of impinging jet burner using ammonia fuel for degreasing steel sheets", J. Combust. Japan, 61, pp.326~330 (2019)
