Adhesion of Cu/Interlayer/Polyimide Flexible Copper Clad Laminate Depending on the Ni-Cr-X Interlayers
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Ni-Cr-X ternary interlayers were investigated to improve the adhesion of Cu/Ni-Cr/Polyimide flexible copper clad laminates. The ternary compounds are sputtered Ni-Cr-X films (where X is one of Nb, V, Mo, or Ti), and the effect of third elements on the adhesion was evaluated and investigated chemically and mechanically. The feel strength was higher in the order of Ni-Cr-Nb > Ni-Cr-V > Ni-Cr > Ni-Cr-Mo > Ni-Cr-Ti. Nb, which has a comparable standard electrode potential to Cr, increased the adhesion, while Ti, with a low standard electrode potential, degraded the adhesion. The Ni-Cr-Nb interlayer was amorphous, while Ni-Cr- Ti was partially crystalline. The similar morphology structure of the Ni-Cr-Nb interlayer with polyimide resulted in a better adhesion.
Abstract
Ni-Cr-X ternary interlayers were investigated to improve the adhesion of Cu/Ni-Cr/Polyimide flexible copper clad laminates. The ternary compounds are sputtered Ni-Cr-X films (where X is one of Nb, V, Mo, or Ti), and the effect of third elements on the adhesion was evaluated and investigated chemically and mechanically. The feel strength was higher in the order of Ni-Cr-Nb > Ni-Cr-V > Ni-Cr > Ni-Cr-Mo > Ni-Cr-Ti. Nb, which has a comparable standard electrode potential to Cr, increased the adhesion, while Ti, with a low standard electrode potential, degraded the adhesion. The Ni-Cr-Nb interlayer was amorphous, while Ni-Cr- Ti was partially crystalline. The similar morphology structure of the Ni-Cr-Nb interlayer with polyimide resulted in a better adhesion.
참고문헌 (19)
- B. I. Noh, "Effect of thermal treatment on adhesion strength of Cu", Ni–Cr, Microelectronic Engineering, pp.2011, 88[DOI]
- F. Barlow, "Low cost flex substrates for miniaturized electronic assemblies", Microelectron. Reliab, 42, pp.1091~1099 (2002)
- 조성수, "RF 바이어스 스피터링한 Cr 박막과 감광성 폴리이미드 사이의 계면 TEM 분석", 마이크로전자 및 패키징학회지, 10(2), pp.7~47 (2003), 한국마이크로전자및패키징학회
- S. Kamiya, "Adhesion energy of Cu", polyimide interface in flexible printed circuits, 2007, pp.202, 1084~1088
- J. Y. Park, "Chemical reaction of sputtered Cu film with PI modified by low energy reactive atomic beam", Applied Surface Science, 252, pp.5877~5891 (2006)
- F. Z. Ren, "Adhesion strength of Ni film on Ti substrate characterized by three-point bend test and theoretic calculation", Mater. Sci. Eng. A, 419, pp.233~237 (2006)
- S. H. Bang, "Improvement of Ni Mo Nb to polyimide adhesion by inductively coupled nitrogen plasma treatment", Applied Surface Science, 360, pp.553~558 (2016)
- J. Y. Song, "Analysis of the T-peel strength in a Cu", Cr, Acta Mater, pp.2002, 50[DOI]
- S. H. Kim, "Effect of surface roughness on the adhesion properties of Cu", Cr films on polyimide substrate treated by inductively coupled oxygen plasma, 2005, pp.200, 2072~2079
- E. Kondoh, "Material characterization of Cu(Ti)-polyimide thin film stacks", Thin Solid Films, 359(2), pp.255~ (2000)
- "IPC-TM-650 test methods manual", The Institute for Interconnecting and Packaging Electronic Circuits, ~
- K. Miyauchi, "A study of adhesive improvement of a Cr-Ni alloy layer on a liquid crystal polymer (LCP) surface", Progress in Organic Coatings, 94, pp.73~78 (2016)
- K. H. Ko, "The interfacial restructuring to amorphous: A new adhesion mechanism of cold-sprayed coatings", Materials Letters, 175, pp.13~15 (2016)
- S. H. Bang, "Application of NiMoNb adhesion layer on plasma-treated polyimide substrate for flexible electronic devices", Thin Solid Films, 558, pp.405~410 (2014)
- Woo-Young Ahn, "Peel Strength of Sputtered FCCL(Flexible Copper Clad Laminate) Using Ar:O2 Mixed Gas Preprocessing and a Ni-Cr Seed Layer", Electronic Materials Letters, 10(4), pp.845~850 (2014), 대한금속·재료학회[DOI]
- A. J. Bard, "Standard potentials in aqueous solutions" (1985), Marcel Dekker
- P. Atkins, "Physical chemistry" (1997), W.H. Freeman and Company
- Yeo-Wan Yun, "Application of an Acrylic Acid Tie-Coating Layer on a Flexible Copper Clad Laminate", Journal of the Korean Physical Society, 54(3), pp.1242~1246 (2009), 한국물리학회
- S. H. Bang, "Improvement of Ni, Mo, Nb to polyimide adhesion by inductively couplednitrogen plasma treatment", Applied Surface Science, 360, pp.553~558 (2016)