Fe-34.4Cr-14.5Ni-2.5Mo-0.4W-0.4Mn-0.5Si 합금의 고온 산화에 미치는 S의 영향
Effect of Sulfur on the High-temperature Oxidation of Fe-34.4Cr-14.5Ni-2.5Mo-0.4W-0.4Mn-0.5Si Alloys
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Two kinds of steels whose compositions were Fe-34.4Cr-14.5Ni-2.5Mo-0.4W-0.4Mn-0.5Si-(0.009 or 0.35)S (wt.%) were centrifugally cast, and oxidized at 900 oC for 50-350 h in order to find the effect of sulfur on the high-temperature oxidation of Fe-34.4Cr-14.5Ni-2.5Mo-0.4W-0.4Mn-0.5Si-(0.009 or 0.35)S (wt.%) alloys. These alloys formed oxide scales that consisted primarily of Cr2O3 as the major oxide and Cr2MnO4 as the minor one through preferential oxidation of Cr and Mn. They additionally formed SiO2 particles around the scale/alloy interface as well as inside the matrices. The high affinity of Mn with S led to the formation of scattered MnS inclusions particularly in the 0.35S-containing cast alloy. Sulfur was harmful to the oxidation resistance, because it deteriorated the scale/alloy adherence so as to accerelate the adherence and compactness of the formed scales.
Abstract
Two kinds of steels whose compositions were Fe-34.4Cr-14.5Ni-2.5Mo-0.4W-0.4Mn-0.5Si-(0.009 or 0.35)S (wt.%) were centrifugally cast, and oxidized at 900 oC for 50-350 h in order to find the effect of sulfur on the high-temperature oxidation of Fe-34.4Cr-14.5Ni-2.5Mo-0.4W-0.4Mn-0.5Si-(0.009 or 0.35)S (wt.%) alloys. These alloys formed oxide scales that consisted primarily of Cr2O3 as the major oxide and Cr2MnO4 as the minor one through preferential oxidation of Cr and Mn. They additionally formed SiO2 particles around the scale/alloy interface as well as inside the matrices. The high affinity of Mn with S led to the formation of scattered MnS inclusions particularly in the 0.35S-containing cast alloy. Sulfur was harmful to the oxidation resistance, because it deteriorated the scale/alloy adherence so as to accerelate the adherence and compactness of the formed scales.
참고문헌 (13)
- D. Luo, "Microstructure and mechanical properties of Mg–5Sn alloy fabricated by a centrifugal casting method", Mater. Letters, 16, pp.108~111 (2014)
- Y. C. Suh, "Development of cast rolls by horizontal spin casting method", J. Kor. Soc. Tech. Plast, 1, pp.111~114 (2009)
- Y. Choi, "Status of domestic turbocharger technology", J. Kor. Soc. Auto. Eng, 35, pp.57~62 (2013)
- W. Wang, "PIM advanced materials & applications 1: Metal injection moulding of heat and wear resistant alloy DIN1.4091", European PM conference proceedings (2015)
- Z. G. Zhang, "Criteria for the formation of protective Al2O3 scales on Fe–Al and Fe–Cr–Al alloys", Corros. Sci, 48, pp.741~765 (2006)
- 이동복, "Corrosion of Fe-9%Cr-1%Mo Steel at 600 and 700oC in N2", (0.5, 2.5)%H2S-mixed Gas, 2016, pp.49(2), 147~151[DOI]
- N. Birks, "Introduction to the high temperature oxidation of metals", pp.145~ (2006), Cambridge University Press
- D. J. Young, "High temperature oxidation and corrosion of metals", pp.342~ (2008), Elsevier
- 이동복, "고 Mn TWIP강의 가열로조건에서의 산화", 대한금속·재료학회지, 53(12), pp.859~866 (2015), 대한금속·재료학회[DOI]
- 박상철, "저탄소강의 대기중 1050~1180℃의 산화에 미치는 합금원소 Si, S, Cu, Sn, Ni의 영향", 대한금속·재료학회지, 48(8), pp.749~756 (2010), 대한금속·재료학회
- 이동복, "강의 대기 중 1050~1200℃의 산화에 미치는 합금원소 Si, Mn, Ni, Cr의 영향", 대한금속·재료학회지, 50(4), pp.300~309 (2012), 대한금속·재료학회[DOI]
- 이동복, "가열로와 열간압연 공정중 강의 고온산화에 미치는 Si의 영향", 대한금속·재료학회지, 52(11), pp.899~908 (2014), 대한금속·재료학회[DOI]
- 윤정봉, "고순도강의 기계적 성질에 미치는 탄소 및 황 함량의 영향", 대한금속·재료학회지, 47(6), pp.331~337 (2009), 대한금속·재료학회