16Cr-10Ni-2Mo 스테인리스강의 정전류 실험에 의한 플라즈마 이온질화 온도 변수에 따른 부식 특성
Corrosion Characteristics of 16Cr-10Ni-2Mo Stainless Steel with Plasma Ion Nitriding Temperatures by Galvanostatic Experiment
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The aim of this paper is to investigate the characteristics of electrochemical corrosion with the plasma ion nitriding temperature for 16Cr-10Ni-2Mo stainless steel. The corrosion behavior was analyzed by means of galvanostatic experiment in natural seawater that applied various current density with plasma ion nitriding temperature parameters. In result of galvanostatic experiment, relatively less surface damage morphology and the less damage depth was observed at a nitrided temperature of 450oC that measured the thickest nitrided layer(S-phase). On the other hand, the most damage depth and unified corrosion behavior presented at a temperature of 500oC.
Abstract
The aim of this paper is to investigate the characteristics of electrochemical corrosion with the plasma ion nitriding temperature for 16Cr-10Ni-2Mo stainless steel. The corrosion behavior was analyzed by means of galvanostatic experiment in natural seawater that applied various current density with plasma ion nitriding temperature parameters. In result of galvanostatic experiment, relatively less surface damage morphology and the less damage depth was observed at a nitrided temperature of 450oC that measured the thickest nitrided layer(S-phase). On the other hand, the most damage depth and unified corrosion behavior presented at a temperature of 500oC.
참고문헌 (30)
- 최창용, "크롬질화처리한 저탄소강의 고분자 전해질 연료전지 분리판으로서의 표면특성", 한국표면공학회지, 44(5), pp.173~178 (2011), 한국표면공학회
- E. Menthe, "Further investigation of the structure and properties of austenitic stainless steel after plasma nitriding", Surf. Coatings Technol, 116-119, pp.199~204 (1999)
- M. Kuczynska-Wydorska, "Corrosion and passivation of low- temperature nitrided AISI 304L and 316L stainless steels in acidified sodium sulphate solution", Corros. Sci, 50, pp.523~533 (2008)
- N. Yasumaru, "Low-Temperature Ion Nitriding of Austenitic Stainless Steels", Mater. Tran. Jpn. Ins. Mat, 39, pp.1046~1052 (1998)
- A. Mendes, "Lowtemperature plasma nitriding of sintered PIM 316L austenitic stainless steel", Mater. Res, 17, pp.100~108 (2014)
- Y. Sun, "Plasma surface engineering of low alloy steel", Mat. Sci. Eng, 140, pp.419~434 (1991)
- W. J. Yang, "Enhancement of mechanical property and corrosion resistance of 316 L stainless steels by low temperature arc plasma nitriding", Surf. Coatings Technol, 298, pp.64~72 (2016)
- Y. Li, "Surface properties of nitrided layer on AISI 316L austenitic stainless steel produced by high temperature plasma nitriding in short time", Appl. Surf. Sci, 298, pp.243~250 (2014)
- J. Baranowska, "Corrosion resistance of nitrided layers on austenitic steel", Surf. Coatings Technol, 200, pp.6623~6628 (2006)
- T. Nakanishi, "Effect of partial solution nitriding on mechanical properties and corrosion resistance in a type 316L austenitic stainless steel plate", Mater. Sci. Eng, 460-461, pp.186~194 (2007)
- S. O. Chong, "Synergistic damage mechanism of corrosion and cavitation-erosion for plasma ion nitrided 18Cr–8Ni–1.1Mn–0.43C stainless steel in seawater", Jpn. J. Appl. Phys, 56, pp.01AG03-1~01AG03-5 (2017)
- R. R. M. De Sousa, "Nitriding using cathodic cage technique of martensitic stainless steel AISI 420 with addition of CH4", Revista Matéria, 13, pp.342~347 (2008)
- H. Michel, "Progress in the analysis of the mechanisms of ion nitriding", Surf. Coatings Technol, 72, pp.103~111 (1995)
- R. Hugon, "Diagnostics of a d.c. pulsed- plasma-assisted nitriding process", Surf. Coatings Technol, 59, pp.82~85 (1991)
- B. Larisch, "Plasma nitriding of stainless steels at low temperatures", Surf. Coatings Technol, 116-119, pp.205~211 (1995)
- G. A. Collins, "Nitriding of austenitic stainless steel by plasma immersion ion implantation", Surf. Coatings Technol, 74-75, pp.417~424 (1995)
- Z. Cheng, "Low temperature plasma nitrocarburising of AISI 316austenitic stainless steel", Surf. Coatings Technol, 191, pp.195~200 (2005)
- F. A. P. Fernandes, "Ion nitriding of a superaustenitic stainless steel:Wear and corrosion characterization", Surf. Coatings Technol, 204, pp.3087~3090 (2010)
- L. Nosei, "Corrosion behavior of ion nitrided AISI 316L stainless steel", Thin Solid Films, 516, pp.1044~1050 (2008)
- L. Poirier, "Solutions to improve surface hardness of stainless steels without loss of corrosion resistance", Surf. Eng, 18, pp.439~441 (2002)
- L. Ferreira, "Martensitic Stainless Steels Low-temperature Nitriding:Dependence of Substrate Composition", Mater. Res, 18, pp.622~627 (2015)
- S. L. Zhang, "Structure and Corrosion Resistance of Plasma Nitrided Stainless Steel", Surf. Eng, 1, pp.131~136 (1985)
- Y. Xi, "Improvement of corrosion and wear resistances of AISI 420martensitic stainless steel using plasma nitriding at low temperature", Surf. Coatings Technol, 202, pp.2577~2583 (2008)
- P. Corengia, "Microstructure and corrosion behaviour of DC-pulsed plasma nitrided AISI 410martensitic stainless steel", Surf. Coatings Technol, 187, pp.63~69 (2004)
- I. L. Rosenfeld, "Mechanism of crevice corrosion", Corrosion, 20, pp.115~125 (1964)
- S. O. Chong, "Optimum temperature on corrosion resistance for plasma ion nitrided 316L stainless steel in sea water solution", Jpn. J. Appl. Phys, 56, pp.01AC04-1~01AC04-4 (2017)
- A. J. Sedriks, "Corrosion of Stainless Steels", pp.13~100 (1996), Wiley-Interscience
- Y. C. Lin, "Effect of residual stress on thermal fatigue in a type 420 martensitic stainless steel weldment", J. Mater. Proc. Technol, 138, pp.22~27 (2003)
- C. R. Clayton, "A Bipolar Model of the Passivity of Stainless Steel: The Role of Mo Addition", J. Electrochem. Soc, 133, pp.2465~2473 (1986)
- Y. S. Cho, "Effects of Ion-Nitriding on the Pitting Behavior of Austenitic Stainless Steels Containing Mo", J. Kor. Corros. Sci. Soc, 23, pp.179~188 (1994)