곡면 커버 글라스용 금형 코팅을 위한 CVD-SiC 기반 세라믹 복합체의 두께에 따른 특성 연구
Thickness dependence of CVD-SiC-based composite ceramic for the mold of the curved cover glass
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The use of a silicon carbide (SiC)-based composite ceramic layer for the mold of a curved cover glass was demonstrated. The stress of SiC/VDR/graphite-based mold structure was evaluated via finite element analysis. The results revealed that the maximum tensile stress primarly occured at the edge region. Moreover, the stress can be reduced by employing a relatively thick SiC coating layer and, therefore, layers of various thicknesses were deposited by means of chemical vapor deposition. During growth of the layer, the orientation of the facets comprising the SiC grain became dominant with additional intense SiC(220) and SiC(004). However, the roughness of the SiC layer increased with increasing thickness of the layer and. Hence, the thickness of the SiC layer needs to be adjusted by values lower than the tolerance band of the curved cover glass mold.
Abstract
The use of a silicon carbide (SiC)-based composite ceramic layer for the mold of a curved cover glass was demonstrated. The stress of SiC/VDR/graphite-based mold structure was evaluated via finite element analysis. The results revealed that the maximum tensile stress primarly occured at the edge region. Moreover, the stress can be reduced by employing a relatively thick SiC coating layer and, therefore, layers of various thicknesses were deposited by means of chemical vapor deposition. During growth of the layer, the orientation of the facets comprising the SiC grain became dominant with additional intense SiC(220) and SiC(004). However, the roughness of the SiC layer increased with increasing thickness of the layer and. Hence, the thickness of the SiC layer needs to be adjusted by values lower than the tolerance band of the curved cover glass mold.
참고문헌 (13)
- B. -Y. Jung, "Advanced glass material technology trends and industry status", Korea Evaluation Institute of Industrial Technology, 11 (2016)
- H. -J. Kim, "Cover glass technology trends for mobile devices", Korea Information Display Society, 17 (2016)
- M.S. Dresselhaus, "Intercalation compounds of graphite", Adv. Phys, 30, pp.139~326 (1981)
- H. O. Pierson, "Handbook of carbon, graphite, diamond, and fullerenes", pp.59~ (1993), William Andrew
- R. Mevrel, "Pack cementation processes", Mater. Sci. Technol, 2, pp.201~206 (1986)
- R. Naslain, "The CVIprocessing of ceramic matrix composites", J. Phys. Colloq, 50, pp.C5-191~C5-207 (1989)
- I. -C. Suh, "A study of the pack cemented sic coating on graphite by experimental design", J. Kor. Ceram. Soc, 29, pp.785~790 (1992)
- R. Pampuch, , Ceramurg. Int, 3, pp.43~ (1977)
- H. O. Pierson, "Handbook of chemical vapor deposition", pp.53~ (1999), William Andrew
- J. -I. Kim, "Application of CVD SiC Material", Ceramist, 19, pp.14~20 (2016)
- Kuk-Jin Hwang, "Controlled infiltration profile of SiC coating layer on graphite by Si vapor deposition reaction", Journal of Ceramic Processing Research, 20(2), pp.169~172 (2019), 청정에너지연구소[DOI]
- J. Chin, "In situ regeneration of fusion reactor first walls", Nucl. Technol, 32, pp.115~124 (1977)
- 이현근, "화학증착법에 의하여 제조된 탄화규소 코팅층의 기계적 특성", 한국세라믹학회지, 43(8), pp.492~497 (2006), 한국세라믹학회