Arc Ion Plating으로 증착된 CrAlN 코팅막의 표면 특성에 미치는 Al 원소의 영향
The Effect of Aluminum Element on the Surface Properties of CrAlN Coating Film Deposited via Arc Ion Plating
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
For this study, CrAlN multilayer coatings were deposited on SKD61 substrates using a multi-arc ion plating technique. The structural characteristics of the CrAlN multilayer coatings were evaluated using X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). Additionally, the adhesion of the coatings was assessed through scratch testing, and the mechanical strength was evaluated using nanoindentation and tribometric tests for frictional properties. The results show that the CrAlN multilayer coatings possess a uniform and dense structure with excellent mechanical strength. Hardness measurements indicated that the CrAlN coatings have high hardness values, and both the coating adhesion and wear resistance were found to be improved compared to CrN. The addition of aluminum is anticipated to contribute to enhanced durability and wear resistance.
Abstract
For this study, CrAlN multilayer coatings were deposited on SKD61 substrates using a multi-arc ion plating technique. The structural characteristics of the CrAlN multilayer coatings were evaluated using X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). Additionally, the adhesion of the coatings was assessed through scratch testing, and the mechanical strength was evaluated using nanoindentation and tribometric tests for frictional properties. The results show that the CrAlN multilayer coatings possess a uniform and dense structure with excellent mechanical strength. Hardness measurements indicated that the CrAlN coatings have high hardness values, and both the coating adhesion and wear resistance were found to be improved compared to CrN. The addition of aluminum is anticipated to contribute to enhanced durability and wear resistance.
참고문헌 (15)
- N. Kumar, "Functionalized Nanomaterials for Corrosion Mitigation : Synthesis", Characterization & Applications, 148, pp.291~316 (2022)
- E. Yang, "Performance study of CrN coatings prepared by DC magnetron sputtering", Journal of Physics : Conference Series, 2541, pp.012041~ (2023)
- Y. Niu, "Microstructure and tribological behavior of multilayered CrN coating by arc ion plating", Surface and Coatings Technology, 275, pp.332~340 (2015)
- K. Kusaka, "Measurement of the residual stress in chromium nitride coatings deposited on an aluminum alloy substrate using arc ion plating method", Journal of Vacuum Science & Technology B, 37, pp.062916~ (2019)
- R. Zhang, "Structure and properties of Arc Ion plating deposited AlCrSiN coatings controlled by pulsed bias voltage", MDPI Metals, 13, pp.1448~ (2023)
- G. E. Lane, "The nucleation and initial growth of gold films deposited onto sodium chloride by ion-beam sputtering", Thin Solid Films, 26, pp.5~23 (1975)
- H. Ju, "The effects of adding aluminum on crystal structure, mechanical, oxidation resistance, friction and wear properties of nanocomposite vanadium nitride hard films by reactive magnetron sputtering", Materials Chemistry and Physics, 215, pp.368~375 (2018)
- Q. Li, "The superior properties of CrN coatings prepared by high power pulsed reactive magnetron sputtering", AIP Advances, 10, pp.015125~ (2020)
- Q. X. Fan, "Influence of Al content on the microstructure and properties of the CrAlN coatings deposited by Arc Ion plating", Acta Metallurgica Sinica (English Letters), 30, pp.1221~1230 (2017)
- J. S. Song, "The effects of interlayer on the DLC coating", Corrosion Science and Technology, 10, pp.65~70 (2011)
- B. Warcholinski, "Structure and properties of AlCrN coatings deposited using cathodic Arc evaporation", Journal of Materials Engineering and Performance, 28, pp.1522~1531 (2019)
- S. P. Mani, "Effect of multilayer CrN", CrAlN coating on the corrosion and contact resistance behavior of 316L SS bipolar plate for high temperature proton exchange membrane fuel cell, 2022, pp.97, 134~146
- L. Y. Liu, "Effect of electromagnetic voltage on wear resistance of CrAlN coatings", Surface Engineering, 37, pp.695~701 (2021)
- M. C. R Guimaraes, "On the Effect of Aluminum on the Microstructure and Mechanical Properties of CrN Coatings deposited by HiPIMS", Materials Research, 21, pp.20170848~ (2018)
- Y. Luo, "Impact abrasive wear resistance of CrN and CrAlN coatings", Surface and Coatings Technology, 215, pp.170~177 (2013)