은의 표면 부식 및 변색을 방지하기 위해 설치된 Al 희생양극의 전기화학적 특성에 미치는 황산 농도의 영향
Effect of concentration of H2SO4 on electrochemical properties of equipped Al sacrificial anode to prevent the corrosion and discolor of silver surface
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Among the various precious metals, silver is used in various fields because of its low price than other precious metals. However, the surface of silver remains after rain in the atmosphere containing sulfur ions and chlorine ions, causing silver corrosion and discoloration. Existing documents have developed a anode to prevent corrosion but that are concentrated on secondary batteries. This study tried to prevent corrosion and discoloration of silver by using an Al sacrificial anode. Sulfuric acid decreased the potential of silver and increased the current density at active polarization and OCP. The amount of corrosion of silver with the Al sacrificial anode was reduced from 0.5 % to 6.5%. When silver is used for decoration outside, corrosion and discoloration of silver can be suppressed by installing an Al anode.
Abstract
Among the various precious metals, silver is used in various fields because of its low price than other precious metals. However, the surface of silver remains after rain in the atmosphere containing sulfur ions and chlorine ions, causing silver corrosion and discoloration. Existing documents have developed a anode to prevent corrosion but that are concentrated on secondary batteries. This study tried to prevent corrosion and discoloration of silver by using an Al sacrificial anode. Sulfuric acid decreased the potential of silver and increased the current density at active polarization and OCP. The amount of corrosion of silver with the Al sacrificial anode was reduced from 0.5 % to 6.5%. When silver is used for decoration outside, corrosion and discoloration of silver can be suppressed by installing an Al anode.
참고문헌 (13)
- J. P. Franey, "THE CORROSION OF SILVER BY ATMOSPHERIC SULFUROUS GASES", Corros Sci, 25(2), pp.133~143 (1985)
- K. A. Folgner, "Design of a Cost Optimized Hybrid Renewable Energy system for Impressed Current Cathodic Protection", ISIE, 59(5), pp.187~197 (2020)
- B. Shin, "Effect of cooling rate after heat treatment on pitting corrosion of super duplex stainless steel UNS S 32750", Anti-Corrosion Methods and Materials, 65(5), pp.492~498 (2018)
- B. Shin, "Effect of Post-Weld Heat Treatment on the Corrosion Behavior of Resistance Spot Welded Super Duplex Stainless UNS S 32750", Int J Electrochem Sci, 14, pp.2430~2441 (2019)
- D. W. Darvel, "Effect of corrosion on the strength of dental silver amalgam", J. Dental, 28, pp.e160~e167 (2012)
- B. D. Dunn, "Corrosion of Silver-Plated Copper Conductors", ESA Journal, 8, pp.307~335 (1984)
- A. Widyaksa, "DESIGN ANALYSIS OF IMPRESSED CURRENT CATHODIC PROTECTION (ICCP)SYSTEM FOR UNDERWATER STRUCTURE OF INDONESIAN WARSHIP (KRI)", International Journal of ASRO, 11(13), pp.134~143 (2020)
- M. A. BAWA, "Investigation on the Potentials of Locally Produced Anodes for Impressed Current Cathodic Protection of Pipelines in Aggressive Environment", IRE Journals, 3(11), pp.80~85 (2020)
- A. M. Jasim, "An Internet of Things Based Cathodic Protection System for Buried Pipeline in Basra", Iraq, 2020, pp.3, 414~428
- Y. N. Ukaru, "PERFORMANCE OF IMPRESSED CURRENT SYSTEM OF CATHODICPROTECTION IN SEAWATER: A CASE STUDY", International Journal of Mechanical and Civil Engineering, 3(1), pp.1~6 (2020)
- "American Society for Testing and Materials G 61", ~ (2018)
- X. Li, "Review on comprehending and enhancing the initial Coulombic efficiency of anode materials in lithium-ion", sodium-ion batteries, 2020, pp.77, 105143~
- Y. Xue1, "A highly-active stable and low-cost platinum-free anode catalyst based on RuNi for hydroxide exchange membrane fuel cells", Nature communications (2020)