자동차 제동시스템의 패드, 라이닝, 허브디스크에 관련된 트라이볼로지적인 특성에 관한 고장사례연구
Failure Study for Tribological Characteristics Including with Pad, Lining and Hub disk in Vehicle Brake System
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The purpose of this paper is to study and analyze the improvement method for the failure examples including the vehicle brake system in actual field. It was verified that the indicator plate of pad wear scratched the brake disk because of wearing after displacement of non- identification parts pad. The caliper of other vehicle was installed with brake system verified the phenomenon produced groove in center point because of one side wear when the pad was not fully contacted with the rub disk by other action surface pressure and pad action condition. It verified that the crack phenomenon fatigue was produced by brake thermal deformation because of decreasing the thickness by grinding to modify the non-uniformed wear of brake disk. It verified that the friction sound was produced by the friction phenomenon because of non-uniformed contact of lining and an alien substance with inner of the drum and lining braking by crack phenomenon with brake drum surface.
Abstract
The purpose of this paper is to study and analyze the improvement method for the failure examples including the vehicle brake system in actual field. It was verified that the indicator plate of pad wear scratched the brake disk because of wearing after displacement of non- identification parts pad. The caliper of other vehicle was installed with brake system verified the phenomenon produced groove in center point because of one side wear when the pad was not fully contacted with the rub disk by other action surface pressure and pad action condition. It verified that the crack phenomenon fatigue was produced by brake thermal deformation because of decreasing the thickness by grinding to modify the non-uniformed wear of brake disk. It verified that the friction sound was produced by the friction phenomenon because of non-uniformed contact of lining and an alien substance with inner of the drum and lining braking by crack phenomenon with brake drum surface.
참고문헌 (17)
- Develpoment of the Brake Assist System, "Hiroaki Yoshida", ~, pp.SAE paper 980601
- Research on a Braking System for Reducing Collision Speed, "Yoji Seto", ~, pp.SAE paper 2003-01-0251
- Brake System Simulation to Predict Brake Pedal Feel in a Passenger, "Andrew J.Day", ~, pp.SAE paper 2009-01-3043
- Thermal Simulation Within the Brake System Design process, "Steffen Eppler", ~, pp.SAE paper 2002-01-2587
- Wheel Cover Affected by the Heat Generated in the Brake System, "Leandro Ratamero", ~, pp.SAE paper 2010-36-0368
- High Temperature Brake Cooling Characterization for Brake High Energy Driving Condition, "Robert L. Nisonger", ~, pp.SAE papre 2011-11-0566
- Brake Judder-Analysis of the Exciation and Transmission Mechanism Brake, Chassis and Steering System, "Ralf Meyer", ~, pp.SAE paper 2005-01-3916
- Customer Orientation - A Further Target in Brake System Design, "Leonardo Pascali", ~, pp.SAE paper 2003-01-0599
- Chung Kyun Kim, "Introduction to Tribology" (1997), Cheong Moon Ga
- Il Kwon Lee, "Automotive Failure Diagnosis" (2002), Sun Hak
- Braking System Quality for Customer Satisfaction, "Jovan Todorovic", ~, pp.SAE paper 950790
- Korea society automotive engineering, "Handbooks of automotive technology", ~ (1996)
- Chungkyun Kim, "Experimental Study on the Tribological Characteristics of Disk Brake", Spring conference proceeding of KSAE, 통권 : 2, pp.911~916 (2004)
- "Maintenance manual of Hyundai Motors", ~
- "Maintenance manual of Kia Motors", ~
- "Maintenance manual of GM Daewoo Motor", ~
- Il Kwon Lee, "Finate Element Analysis on the Thermoelastic Wear Behaviors for a High-Speed Disk Brake", Journal of the KSTLE, 15(4), pp.291~296 (1999)