브레이크 디스크 표면 패턴에 따른 FE 스퀼 및 진동해석
FE Squeal and Vibration Analysis with Pattern of Brake Disc Surface
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this paper, the relationship between the frequency split and the mode-coupling in the disc doublet mode, which is expressed according to the pattern of the surface of the disc, is utilized by using of 3 types(Chaos, Vent-hole, Normal). As the frequency split between the doublet mode disc that is expressed in the model through the interpretation is larger, and analogy through interpretation mode-coupling instability also lower. Vent-hole, which has a relatively large frequency split of disc doublet mode in 3 types(Chaos, Vent-hole,Normal) model, showed a large value of critical coefficient of friction in which mode-coupling instability is expressed. In addition, it was confirmed by analysis that the Vent-hole had a relatively large frequency split than the other models by analyzing the change in contact stiffness. It can be concluded that the larger the frequency split of the disc doublet mode, the lower the instability due to the mode-coupling.
Abstract
In this paper, the relationship between the frequency split and the mode-coupling in the disc doublet mode, which is expressed according to the pattern of the surface of the disc, is utilized by using of 3 types(Chaos, Vent-hole, Normal). As the frequency split between the doublet mode disc that is expressed in the model through the interpretation is larger, and analogy through interpretation mode-coupling instability also lower. Vent-hole, which has a relatively large frequency split of disc doublet mode in 3 types(Chaos, Vent-hole,Normal) model, showed a large value of critical coefficient of friction in which mode-coupling instability is expressed. In addition, it was confirmed by analysis that the Vent-hole had a relatively large frequency split than the other models by analyzing the change in contact stiffness. It can be concluded that the larger the frequency split of the disc doublet mode, the lower the instability due to the mode-coupling.
참고문헌 (11)
- 최병재, "상용 차량의 브레이크 저더 소음 원인 규명 및 저감에 관한 연구", 한국기계기술학회지, 17(1), pp.5~9 (2015), 한국기계기술학회
- 유충준, "철도 차량의 블록 브레이크 거동과 제동 스퀼 소음과의 연관성에 대한 실험적 연구", 한국기계기술학회지, 17(3), pp.551~557 (2015), 한국기계기술학회
- 강재영, "스퀼 융합모델을 이용한 접촉부 강성인자에 따른 브레이크 스퀼 영향도 연구", 한국소음진동공학회논문집, 24(10), pp.749~755 (2014), 한국소음진동공학회[DOI]
- 박기완, "패드 접촉강성 변화에 따른 FE스퀼해석법 및 실험 검증", 대한기계학회논문집 A, 41(5), pp.345~352 (2017), 대한기계학회
- M. Nouby, "Disc Brake Squeal Reduction Through Pad Structural Modifications" (2009), ICREATE
- J. Y. Kang, "Analytical formulation of mode-coupling instability in disc-pad coupled system", International Journal of Mechanical Sciences, 51(1), pp.52~63 (2009)
- Rotor Asymmetry Used to Reduce Disc Brake Noise, "J. D. Fieldhouse", SAE Warrendale, ~, pp.2004-01-2797, SAE Warrendale (2004)
- G. S. Korspeter, "Eigenvalue optimization against brake squeal: Symmetry, mathematical background and experiments", Journal of Sound and Vibration, 331(19), pp.4259~4268 (2012)
- 남재현, "캘리퍼 접촉강성을 고려한 브레이크 스퀼 해석", 한국소음진동공학회논문집, 23(8), pp.717~724 (2013), 한국소음진동공학회[DOI]
- 강재영, "회전 디스크 브레이크의 스퀼소음에 대한 선형안정성 연구", 한국소음진동공학회논문집, 19(10), pp.1092~1098 (2009), 한국소음진동공학회
- D. N. Vanderlugt, "Analytical and Experimental Study of Automotive Disc Brake Squeal Vibration", Master, pp.2004