용사법에 의해 제조된 Al/SiC 복합재료의 마모거동 (1) - 미끄럼 속도의 영향 -
Wear Behavior of Al/SiC Composites Fabricated by Thermal Spray Process (1) - Effect of Sliding Speed on Wear Behavior -
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Al/SiC composites were fabricated by thermal spray process, and the dry sliding wear tests were performed using the various sliding speed of 10, 30, 60 and 90 RPM through 1000 cycles. The applied load was 10 N and radius of wear track was 15 mm. Wear tracks on the Al/SiC composites were investigated using scanning electron microscope(SEM) and energy dispersive X-ray spectroscopy (EDS). In the case of sliding speed of 10 RPM, adhesive wear behavior caused by plastic deformation of composits surface was observed. In the cases of sliding speed of 30, 60, 90 RPM, abrasive wear behavior on the adhered layer formed by debris were observed. Through this study, it was found that the wear behavior of Al/SiC composites was mainly influenced by the sliding speed.
Abstract
Al/SiC composites were fabricated by thermal spray process, and the dry sliding wear tests were performed using the various sliding speed of 10, 30, 60 and 90 RPM through 1000 cycles. The applied load was 10 N and radius of wear track was 15 mm. Wear tracks on the Al/SiC composites were investigated using scanning electron microscope(SEM) and energy dispersive X-ray spectroscopy (EDS). In the case of sliding speed of 10 RPM, adhesive wear behavior caused by plastic deformation of composits surface was observed. In the cases of sliding speed of 30, 60, 90 RPM, abrasive wear behavior on the adhered layer formed by debris were observed. Through this study, it was found that the wear behavior of Al/SiC composites was mainly influenced by the sliding speed.
참고문헌 (8)
- S. Scudino, "Powder Metallurgy of Al-based Metal Matrix Composites Reinforced with β-Al3Mg2 Intermetallic Particles: Analysis and Modeling of Mechanical Properties", Acta Materialia, 57(15), pp.4529~4538 (2009)
- L. Falcon-Franco, "Wear Performance of TiC as Reinforcement of a Magnesium Alloy Matrix Composite", Composites Part B: Engineering, 42(2), pp.275~279 (2011)
- K. Sukumaran, "Studies on Squeeze Casting of Al 2124 alloy and 2124-10% SiCp Metal Matrix Composite", Journal of Alloys and Compounds, 482(1), pp.516~521 (2008)
- Z.Y. Liu, "Powder Injection Moulding of an Al–AlN Metal Matrix Composite", Materials Science and Engineering: A, 513, pp.352~356 (2009)
- T. Shalu, "Development and Characterization of Liquid Carbon Fibre Reinforced Aluminium Matrix Composite", Journal of Materials Processing Technology, 209(10), pp.4809~4813 (2009)
- F. Scherm, "Microstructural Characterization of Interpenetrating Light Weight Metal Matrix Composites", Materials Science and Engineering: A, 518(1), pp.118~123 (2009)
- Martin Silber, "Thermal Spraying of Billets and Fiber Prepregs for Semi-solid Forming of Metal Matrix Composites", Surface and Coatings Technology, 202(18), pp.4525~4530 (2008)
- J. Suffner, "Microstructure and Mechanical Properties of Neareutectic ZrO2-60 wt.% Al2O3 Produced by Quenched Plasma Spraying", Materials Science and Engineering:A, 506(1), pp.180~186 (2009)