온도 상승에 따른 혼합금속복합재료의 건식 마찰특성 평가
Evaluation of Dry Tribological Characteristics of Hybrid Metal Matrix Composites with Temperature Rising
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Al2O3 fiber and SiC particle hybrid metal matrix composites (MMCs) were manufactured by squeeze casting method investigated for their tribological properties. The pin specimens had different ratios of fiber to particle content but their total weight fraction was constant at 20 wt. %. Tribological tests were performed with a pin-on-disk friction and wear tester. The investigation of the dry tribological characteristics of hybrid MMCs were carried out at room temperature and elevated temperature of 100 °C and 150 °C. The morphologies of worn surfaces were examined by scanning electron microscope (SEM) to observe tribological characteristics and investigate wear behavior. The results revealed that the wear resistance improved with the content of SiCp increased of the planar random (PR) MMCs at room temperature. At the elevated temperature, it revealed that the wear resistance of normal (N) MMCs was superior to that of the PR-MMCs due to PR-fibers were easily pulled out holistically from the worn surface. Meanwhile, the coefficient of friction decreased with the temperature increasing.
Abstract
Al2O3 fiber and SiC particle hybrid metal matrix composites (MMCs) were manufactured by squeeze casting method investigated for their tribological properties. The pin specimens had different ratios of fiber to particle content but their total weight fraction was constant at 20 wt. %. Tribological tests were performed with a pin-on-disk friction and wear tester. The investigation of the dry tribological characteristics of hybrid MMCs were carried out at room temperature and elevated temperature of 100 °C and 150 °C. The morphologies of worn surfaces were examined by scanning electron microscope (SEM) to observe tribological characteristics and investigate wear behavior. The results revealed that the wear resistance improved with the content of SiCp increased of the planar random (PR) MMCs at room temperature. At the elevated temperature, it revealed that the wear resistance of normal (N) MMCs was superior to that of the PR-MMCs due to PR-fibers were easily pulled out holistically from the worn surface. Meanwhile, the coefficient of friction decreased with the temperature increasing.
참고문헌 (15)
- Rohatgi P, "Cast aluminium-matrix composites for automotive applications", JOM, 431991, pp.10~15
- Fu G.F, "Fabrication and properties of Al matrix composites strengthened by in situ alumina particulates", JOM, 13, pp.263~266 (2006)
- Sahin Y, "Wear behavior of planar-random fibre-reinforced metal matrix composites", Wear, 223, pp.173~183 (1998)
- Kato, K, "Wearin relation to friction-a review", Wear, 241, pp.151~157 (2000)
- Sahin Y, "Wear behavior of aluminium alloy and its composites reinforced by SiC particles using statistical analysis", Mater. Des., 223, pp.173~183 (2003)
- Natarajan N, "Wear behaviour of A356", 25SiCp aluminium matrix composites sliding against automobile friction material, 2006, pp.261, 812~822
- Zhang S.Y, "Comparison of friction and wear performances of brake material dry sliding against two aluminum matrix composites reinforced with different SiC particles", J. Mater. Process. Technol., 182, pp.122~127 (2007)
- Rodríguez J, "Dry sliding wear behaviour of aluminium-lithium alloys reinforced with SiC particles", Wear, 262, pp.292~300 (2007)
- Ünlü B.S, "Investigation of tribological and mechanical properties Al2O3-SiC reinforced Al composites manufactured by casting or P", M method, 2008, pp.29, 2002~2008
- Yilmaz S.O, "Comparison on abrasive wear of SiCrFe, CrFeC and Al2O3 reinforced Al2024 MMCs", Tribol. Int., 40, pp.441~452 (2007)
- Romanova V.A, "The influence of the reinforcing particle shape and interface strength on the fracture behavior of a metal matrix composite", Acta Mater., 57, pp.97~107 (2009)
- Rosenberger M.R, "Wear behavior of AA1060 reinforced with alumina under different loads", Wear, 266, pp.356~359 (2009)
- Bai M.W, "Wear mechanisms of K2Ti4O9 whiskers reinforced Al---20Si aluminum matrix composites with lubrication of water and tetradecane", Wear, 199, pp.222~227 (1996)
- Fu, H. H, "Wear properties of Saffil", Al, Saffil, Al and Saffil, pp.SiC, Al hybrid metal matrix composites[DOI]
- Du Z.M, "Mater. Process. Study of the preparation of Al2O3sf·SiCp", Al composites and their wearresisting properties, 2004, pp.151, 298~301