SLM방식으로 출력된 STS 316L의 기계적 및 마찰 · 마모특성에 미치는 UNSM처리 후 영향에 관한 연구
A Study on the Effect of UNSM Treatment on the Mechanical and Tribological Properties of STS 316L Printed by Selective Laser Melting
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
STS 316L prepared by additive manufacturing (AM) exhibits deterioration of mechanical properties and wear resistance due to the presence of defects such as black-of-fusion defects, internal porosity, residual stress, and anisotropy. In addition, high surface roughness (integrity) of AM products remains an issue. This study aimed to apply ultrasonic nanocrystal surface modification (UNSM) technology to STS 316L prepared by AM to increase the surface hardness, to reduce the surface roughness, and to improve the friction and wear behavior to the level achieved by bulk material manufactured using traditional processes. Herein, the as-received and polished specimens were treated by UNSM technology and their resulting properties were compared and discussed. The results showed that UNSM technology increased the surface hardness and reduced the surface roughness of the as-received and polished specimens. These results can be attributed to grain size refinement and pore elimination from the surface. Moreover, the friction of the as-received and polished specimens after UNSM technology was lower compared to those of the as-received and polished specimens, but no significant differences in wear resistance were found.
Abstract
STS 316L prepared by additive manufacturing (AM) exhibits deterioration of mechanical properties and wear resistance due to the presence of defects such as black-of-fusion defects, internal porosity, residual stress, and anisotropy. In addition, high surface roughness (integrity) of AM products remains an issue. This study aimed to apply ultrasonic nanocrystal surface modification (UNSM) technology to STS 316L prepared by AM to increase the surface hardness, to reduce the surface roughness, and to improve the friction and wear behavior to the level achieved by bulk material manufactured using traditional processes. Herein, the as-received and polished specimens were treated by UNSM technology and their resulting properties were compared and discussed. The results showed that UNSM technology increased the surface hardness and reduced the surface roughness of the as-received and polished specimens. These results can be attributed to grain size refinement and pore elimination from the surface. Moreover, the friction of the as-received and polished specimens after UNSM technology was lower compared to those of the as-received and polished specimens, but no significant differences in wear resistance were found.
참고문헌 (16)
- G. Miranda, "Predictive models for physical and mechanical properties of 316L stainless steel produced by selective laser melting", Materials Science and Engineering: A, 657, pp.43~56 (2016), Elsevier BV[DOI]
- F. Bartolomeu, "Predictive models for physical and mechanical properties of Ti6Al4V produced by Selective Laser Melting", Materials Science and Engineering: A, 663, pp.181~192 (2016), Elsevier BV[DOI]
- Tuan D. Ngo, "Additive manufacturing (3D printing): A review of materials, methods, applications and challenges", Composites Part B: Engineering, 143, pp.172~196 (2018), Elsevier BV[DOI]
- Sun, Z., "Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting", NPG Asia Mater, 10, pp.127~136 (2018)
- Frazier, W. E., "Metal additive manufacturing : A review", J. Mater. Eng. Perform, 23, pp.1917~1928 (2014)
- Kamran Aamir Mumtaz, "High density selective laser melting of Waspaloy®", Journal of Materials Processing Technology, 195(1-3), pp.77~87 (2008), Elsevier BV[DOI]
- Martin, J. H., "3D printing of high-strength aluminium alloys", Nature, 549, pp.365~369 (2017)
- Haase, C., "Exploiting process-related advantages of selective laser melting for the production of high-manganese steel", Materials (2017)[DOI]
- F. Bartolomeu, "316L stainless steel mechanical and tribological behavior—A comparison between selective laser melting, hot pressing and conventional casting", Additive Manufacturing, 16, pp.81~89 (2017), Elsevier BV[DOI]
- 편영식, "초음파 나노표면개질기술의 특성과 활용방안 연구", 대한기계학회논문집 A, 33(03), pp.190~195 (2009), 대한기계학회
- Y. Zhu, "Tribology of selective laser melting processed parts: Stainless steel 316L under lubricated conditions", Wear, 350-351, pp.46~55 (2016), Elsevier BV[DOI]
- Jun Liu, "Effects of ultrasonic nanocrystal surface modification on the thermal oxidation behavior of Ti6Al4V", Surface and Coatings Technology, 325, pp.289~298 (2017), Elsevier BV[DOI]
- Auezhan Amanov, "Effect of combined shot peening and ultrasonic nanocrystal surface modification processes on the fatigue performance of AISI 304", Surface and Coatings Technology, 358, pp.695~705 (2019), Elsevier BV[DOI]
- Auezhan Amanov, "Low friction and high strength of 316L stainless steel tubing for biomedical applications", Materials Science and Engineering: C, 71, pp.176~185 (2017), Elsevier BV[DOI]
- Auezhan Amanov, "The usability and preliminary effectiveness of ultrasonic nanocrystalline surface modification technique on surface properties of silicon carbide", Applied Surface Science, 311, pp.448~460 (2014), Elsevier BV[DOI]
- Gwidon, W., "Engineering Tribology", pp.399~ (2005), Butterworth-Heinemann