침탄처리한 SCM420H의 미끄럼 마모 특성에 미치는 침탄 조건의 영향
Effects of Carburizing Process on Sliding wear Behavior of Carburized SCM420H Steel
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The effects of the carburizing process on the sliding wear behavior of SCM420H steel have been investigated. In particular, the effects of grain boundary corrosion observed in the surface layer after gas carburizing and the effects of hardness of the carburized cases after heat-treatment on the sliding wear properties were examined. Pin specimens carburized by two methods (gas carburizing and vacuum carburizing) were tempered at two temperatures of 180℃ and 400℃ after oil-quenching, respectively. Sliding wear tests were carried out against heattreated SKH51 steel at several sliding speeds using a pin-on-disc type test machine. As results, it can be found that there is no difference in the wear behavior between the pins carburized using two methods. This implies that the grain boundary corrosion that formed in the surface layer after gas carburizing has no effect on the sliding wear behavior of carburized SCM420H steels. Additionally, there is no significant difference in the wear behavior between carburized pins tempered at 400℃ and at 180℃ after oil-quenching, regardless of the carburizing method. This is because carburized pins tempered at 400℃ have a troostite structure, which exhibits higher tribochemical reactivity even though its hardness is lower than that of martensite structure. In this respect, it can be considered that good wear resistance of carburized cases is maintained at least until the effective case depth.
Abstract
The effects of the carburizing process on the sliding wear behavior of SCM420H steel have been investigated. In particular, the effects of grain boundary corrosion observed in the surface layer after gas carburizing and the effects of hardness of the carburized cases after heat-treatment on the sliding wear properties were examined. Pin specimens carburized by two methods (gas carburizing and vacuum carburizing) were tempered at two temperatures of 180℃ and 400℃ after oil-quenching, respectively. Sliding wear tests were carried out against heattreated SKH51 steel at several sliding speeds using a pin-on-disc type test machine. As results, it can be found that there is no difference in the wear behavior between the pins carburized using two methods. This implies that the grain boundary corrosion that formed in the surface layer after gas carburizing has no effect on the sliding wear behavior of carburized SCM420H steels. Additionally, there is no significant difference in the wear behavior between carburized pins tempered at 400℃ and at 180℃ after oil-quenching, regardless of the carburizing method. This is because carburized pins tempered at 400℃ have a troostite structure, which exhibits higher tribochemical reactivity even though its hardness is lower than that of martensite structure. In this respect, it can be considered that good wear resistance of carburized cases is maintained at least until the effective case depth.
참고문헌 (14)
- Yoshida, T., "Case hardening technology", pp.131~153 (1971), Nikkankokyoshinbun
- Kim, H, K, "Vacuum carburizing", J. Kor. Soc. Heat Treat, 2(1), pp.8~12 (1989)
- Park, S. J., "Hardness and distortion characteristics of SCM415 steel by carburizing", J. Kor. Soc. Heat Treat, 15(6), pp.269~271 (2002)
- Lee, S. -G., "A study on setting up condition of treatment for vacuum carburizing", J. Kor. Soc. Heat Treat, 5(4), pp.195~200 (1992)
- Son, M. R., "Internal oxidation and abnormal structure on the surface under carburizing gas atmosphere", J. Kor. Soc. Heat Treat, 2(1), pp.13~20 (1989)
- Yamada, T., "Rolling fatigue of gas and vacuum carburized steels", J. Jpn. Soci. Heat Treat, 22(3), pp.141~146 (1982)
- Choi, Y. T., "Microstructure and effective case depth of the vacuum carburized steels", J. Kor. Soc. Heat Treat, 5(1), pp.32~40 (1992)
- 변재혁, "CO2 무 배출 침탄 열처리된 SCM415H 소재의 기계적 성질", 대한기계학회논문집 A, 36(9), pp.971~978 (2012), 대한기계학회[DOI]
- 신정호, "0.16C-0.60Si-2.00Cr-0.34Mo강의 피팅강도에 미치는 고탄소 침탄의 영향", 대한금속·재료학회지, 50(7), pp.517~522 (2012), 대한금속·재료학회[DOI]
- Baek, S. H., "Friction-wear properties of carburized SNCM", J. Kor. Soc. Heat Treat, 11(3), pp.159~167 (1998)
- Takeuchi, E., "Friction and wear of chemical treated surface", J. Jpn. Soci. Lubr. Eng, 30(5), pp.341~351 (1985)
- Lee, H. -Y., "Analysis of sliding wear mode on annealed steel by X-ray diffraction technique", Wear, 256, pp.627~663 (2004)
- 이한영, "이종 상대재 경도에 따른 철강재료의 미끄럼 마모 특성 해석", 한국트라이볼로지학회지, 32(6), pp.195~200 (2016), 한국트라이볼로지학회[DOI]
- William F. Smith, "Foundations of Materials Science and Engineering", pp.640~ (2008), Scitech Media