초음파나노표면개질기술로 제작된 마이크로 그루브가미끄럼 마찰 특성에 주는 영향
Effect of Micro-grooves Manufactured via UltrasonicNanocrystalline Surface Modification on Sliding Friction
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The surface texture produced via surface texturing is an important approach for controlling the tribological behavior of friction behavior of mechanical devices. The purpose of this study is to investigate the effect of grooves generated via ultrasonic nanocrystal surface modification (UNSM) technology on the tribological performance of AISI 4150 steel against stainless steel 316L. In the study, tribological tests are performed under two different regimes, namely mixed and hydrodynamic lubrication, by varying the applied normal load and reciprocating speed during the tests. According to the test results, the friction coefficient decreases as static load (10 N, 30 N, and 50 N) of UNSM technology increases in the mixed lubrication regime. Conversely, the friction coefficient increases as the static load (10 N, 30 N, and 50 N) of UNSM technology increases in the hydrodynamic lubrication regime. Hence, the results indicate that micro-grooves generate hydrodynamic pressure in the outlet, which increases the oil film thickness between the two mating surfaces. This potentially leads to a reduction in friction in the mixed lubrication regime due to the prevention of contact of asperities and debris. However, the results indicate an adverse effect in the hydrodynamic lubrication regime. In this regard, additional experiments should be performed to investigate the effect of grooves generated by UNSM technology at varying conditions on the friction behavior of AISI 4150 steel, which in turn can be controlled by the generated pressure and oil film thickness at the contact interface.
Abstract
The surface texture produced via surface texturing is an important approach for controlling the tribological behavior of friction behavior of mechanical devices. The purpose of this study is to investigate the effect of grooves generated via ultrasonic nanocrystal surface modification (UNSM) technology on the tribological performance of AISI 4150 steel against stainless steel 316L. In the study, tribological tests are performed under two different regimes, namely mixed and hydrodynamic lubrication, by varying the applied normal load and reciprocating speed during the tests. According to the test results, the friction coefficient decreases as static load (10 N, 30 N, and 50 N) of UNSM technology increases in the mixed lubrication regime. Conversely, the friction coefficient increases as the static load (10 N, 30 N, and 50 N) of UNSM technology increases in the hydrodynamic lubrication regime. Hence, the results indicate that micro-grooves generate hydrodynamic pressure in the outlet, which increases the oil film thickness between the two mating surfaces. This potentially leads to a reduction in friction in the mixed lubrication regime due to the prevention of contact of asperities and debris. However, the results indicate an adverse effect in the hydrodynamic lubrication regime. In this regard, additional experiments should be performed to investigate the effect of grooves generated by UNSM technology at varying conditions on the friction behavior of AISI 4150 steel, which in turn can be controlled by the generated pressure and oil film thickness at the contact interface.
참고문헌 (16)
- I. Etsion, "Improving Tribological Performance of Mechanical Components by Laser Surface Texturing", Tribology Letters, 17(4), pp.733~737 (2004), Springer Science and Business Media LLC[DOI]
- I. Etsion, "A Laser Surface Textured Hydrostatic Mechanical Seal", Tribology Transactions, 45(3), pp.430~434 (2002), Informa UK Limited[DOI]
- V. Brizmer, "A Laser Surface Textured Parallel Thrust Bearing", Tribology Transactions, 46(3), pp.397~403 (2003), Informa UK Limited[DOI]
- Vlădescu, S. -C., "Lubricant film thickness and friction force measurements in a laser surface textured reciprocating line contact simulating the piston ring-liner pairing", Tribol. Int, 98, pp.317~329 (2016)
- Ravinder B. Siripuram, "Effect of Deterministic Asperity Geometry on Hydrodynamic Lubrication", Journal of Tribology, 126(3), pp.527~534 (2004), ASME International[DOI]
- Dowson, D., "Cavitation in bearings", Ann. Rev. Fluid Mech, 11, pp.35~66 (1979)
- Current research in cavitating fluid films, "Brewe, D. E.", NASA Technical Memorandum, ~, pp.AVSCOM 89-C-007 (1988)
- Mihai B. Dobrica, "Mixed Elastohydrodynamic Lubrication in a Partial Journal Bearing—Comparison Between Deterministic and Stochastic Models", Journal of Tribology, 128(4), pp.778~788 (2006), ASME International[DOI]
- 김종형, "윤활영역에서 멀티크기 Laser Surface Texturing 효과", 한국트라이볼로지학회지, 30(1), pp.59~63 (2014), 한국트라이볼로지학회[DOI]
- 박태조, "미세 그루브가 있는 무한폭 Slider 베어링의 윤활해석:제1보 - 그루브 위치의 영향", 한국트라이볼로지학회지, 35(6), pp.376~381 (2019), 한국트라이볼로지학회[DOI]
- 박태조, "미세 그루브가 있는 무한폭 Slider 베어링의 윤활해석:제2보 - 그루브 깊이의 영향", 한국트라이볼로지학회지, 35(6), pp.382~388 (2019), 한국트라이볼로지학회[DOI]
- Samuel Cupillard, "Pressure Buildup Mechanism in a Textured Inlet of a Hydrodynamic Contact", Journal of Tribology, 130(2) (2008), ASME International[DOI]
- Dobrica, M. B., "About the validity of Reynolds equation and inertia effects in textured sliders of infinite width", Proc. Inst. Mech. Eng. Part J : J. Eng. Tribol, 223, pp.69~78 (2009)
- 홍사훈, "미세 딤플 가공 표면의 수력학적 윤활특성에 대한 수치해석", 한국전산유체공학회지, 14(4), pp.56~61 (2009), 한국전산유체공학회
- 편영식, "초음파 나노표면개질기술의 특성과 활용방안 연구", 대한기계학회논문집 A, 33(03), pp.190~195 (2009), 대한기계학회
- Daniel Gropper, "Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings", Tribology International, 94, pp.509~529 (2016), Elsevier BV[DOI]