WC위 TiAlN 코팅층에 미치는 Sand Blasting 처리의 영향
Effects of Sand Blasting on TiAlN Coating on WC Hard Metal Alloy Tip
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The effect of the sand blasting before TiAlN coating in the manufacture of WC hard metal alloy tips have been studied. For four different tips, according to the status of processing of the sand blasting and the coating, residual stress measurement by X-ray diffraction and several tests for mechanical properties have been conducted. The results suggest that there was no difference in static mechanical properties, such as hardness, surface roughness and elastic modulus, between two coatings. Furthermore, compressive residual stress was generated equally on their surfaces. Additionally, the compressive residual stress in substrate WC was found to increase greatly when subjected to sand blasting treatment. However, the compressive residual stress decrease after coating regardless of sand blasting treatment. Nevertheless, it is confirmed that the compressive residual stress generated in the coating after sand blasting is less than that in the non-sandblasting coating. This was attributed to the plastic deformation occurring in the WC substrate during coating after sand blasting. In contrast to the scratch test results, sand blasting was assumed to have a negative effect on the adhesion between the coating and substrate. This is because there is a high possibility of microcracks due to plastic deformation in the WC substrate under the coating after sand blasting.
Abstract
The effect of the sand blasting before TiAlN coating in the manufacture of WC hard metal alloy tips have been studied. For four different tips, according to the status of processing of the sand blasting and the coating, residual stress measurement by X-ray diffraction and several tests for mechanical properties have been conducted. The results suggest that there was no difference in static mechanical properties, such as hardness, surface roughness and elastic modulus, between two coatings. Furthermore, compressive residual stress was generated equally on their surfaces. Additionally, the compressive residual stress in substrate WC was found to increase greatly when subjected to sand blasting treatment. However, the compressive residual stress decrease after coating regardless of sand blasting treatment. Nevertheless, it is confirmed that the compressive residual stress generated in the coating after sand blasting is less than that in the non-sandblasting coating. This was attributed to the plastic deformation occurring in the WC substrate during coating after sand blasting. In contrast to the scratch test results, sand blasting was assumed to have a negative effect on the adhesion between the coating and substrate. This is because there is a high possibility of microcracks due to plastic deformation in the WC substrate under the coating after sand blasting.
참고문헌 (16)
- Kobayashi, M, "Cutting Tool Materials", J. of Japanese Society of Tribologists, 36(7), pp.523~526 (1991)
- Sasaki, K., "Part of Hard Films on Cutting Tool", J. of Japanese Society of Tribologists, 36(12), pp.941~946 (1991)
- P.C Jindal, "Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in turning", International Journal of Refractory Metals and Hard Materials, 17(1-3), pp.163~170 (1999), Elsevier BV[DOI]
- Kim, H. -J., "Cutting Performance of TiAlN coated WC Insert Tip", Proc. Spring Conf. Korean Soc. Tribol. Lubr. Engr, pp.281~286 (2001)
- Park, D. S., "The Effect of TiAlN Coated Ball end Mill and MQL Cutting Condition on Cutting Characteristic of High hardness Steels", Proc. of the Korean Soc. for Tech. of Plasticity Conf, pp.245~251 (2004)
- 임희열, "WC-Co 인써트의 절삭 성능에 미치는 TiAlN계 나노 다층막 코팅의 영향", Applied Science and Convergence Technology, 15(1), pp.110~116 (2006), 한국진공학회
- Sudou, H, "Residual Stress and Distorson", pp.180~ (1994), Uchida Rokakuho Publishing co
- Yoritani, S., "Occurrence and Countermeasures for Residual Stress", pp.264~ (1987), Yokendo
- Davidge, R. W., "Mechanical behavior of Ceramics", pp.88~ (1979), Cambridge Univ. press
- The Japan society of Materials Science, "Standard Method for X-ray Stress Measurement", ~ (1982)
- The Japan society of Materials Science, "Strength of Materials by X-ray", pp.209~ (1981), Youkendo
- Noyan, I.C., "Residual Stress", pp.117~ (1987), Springer-verlar New York Inc
- Japan Society of Heat Treatment Technology, "Residual Stress", pp.72~ (1968), Kyoritsu book co
- The Japan Society of Materials Science, "Measurement of Residual Stress by X-ray", pp.163~ (1981), Yokendo
- Lee, H. -Y., "Analysis of Sliding Wear Mode on Annealed Steel by X-ray Diffraction Technique", Wear, 256, pp.657~663 (2003)
- The Japan Society of Materials Science, "Strength Evaluation of Materials by X-ray", pp.302~ (1981), Yokendo