산업현장을 고려한 작업복 소재의 역학적 특성 연구
The Mechanical Properties of Working Clothes Materials Considering Industrial Settings
2
조회
0
다운로드
9
인용
0
참고문헌
키워드
초록
In order to investigate the mechanical properties of working clothes materials considering industrial settings, the test weaving materials were compared with the existing materials depending on the season. The material design of the test fabrics were changed through fineness, composition, density of materials then subsequently treated with functional finish. As a result of evaluation of the forms according to KES-FB system, Koshi was deduced, and Numeri and Fukurami were increased. Thereby, the test weaving materials became flexible, surface became smoother, elasticity and volume characteristics indicated to have been improved. Consequently, the THV value of working clothes materials for test weaving was increased compared to existing materials which indicated improved result of the total hand value. Specially, the winter cloth material indicated improved drape characteristics and dimensional characteristics, showed improved liveliness as being compressed softly.
Abstract
In order to investigate the mechanical properties of working clothes materials considering industrial settings, the test weaving materials were compared with the existing materials depending on the season. The material design of the test fabrics were changed through fineness, composition, density of materials then subsequently treated with functional finish. As a result of evaluation of the forms according to KES-FB system, Koshi was deduced, and Numeri and Fukurami were increased. Thereby, the test weaving materials became flexible, surface became smoother, elasticity and volume characteristics indicated to have been improved. Consequently, the THV value of working clothes materials for test weaving was increased compared to existing materials which indicated improved result of the total hand value. Specially, the winter cloth material indicated improved drape characteristics and dimensional characteristics, showed improved liveliness as being compressed softly.
참고문헌 (28)
- Concurrent Engineering in the Design of Protective Clothing: Interfacing with Equipment Design, Performance of Protective Clothing: Improvement through Innovation, "S. P. Ashdown", ASTM, 471~485 (1996)
- S. W. Lee, "Clothing and Environment", pp.214~216 (2004), Korea National Open University Press
- W. E. Rosenblad, "User-oriented Product Development Applied to Functional Clothing Design", Applied Ergonomics, 16(4), pp.279~ (1985)
- 배현숙, "산업현장의 작업환경 및 공정에 따른 작업복 착의실태-기계·자동차·조선업을 중심으로-", 한국의류학회지, 34(8), pp.1378~1391 (2010), 한국의류학회
- J. S. Shin, "Improvement of Comfortability and Ability on Disposable Clothes Fabric for Disposable Work Clothing Using Charcoal Printing", Proceedings of the Korean Society Clothing and Textiles Spring Conference, 27, pp.93~ (2003)
- 신정숙, "천연염재를 활용한 일회용 작업복 소재의 기능성 특성 평가", 복식문화연구, 12(6), pp.114~124 (2004), 복식문화학회
- 신정숙, "황토 날염을 이용한 일회용 작업복 소재의 쾌적성 및기능성 향상에 관한 연구", 복식문화연구, 15(2), pp.276~283 (2007), 복식문화학회
- 김성숙, "소재개선에 따른 건설현장 작업복 착의기능성 평가", 한국의류산업학회지, 10(2), pp.228~235 (2008), 한국의류산업학회
- 김성숙, "건설현장 작업복의 소재 기능성 향상에 따른 생리반응", 한국의류산업학회지, 13(5), pp.752~758 (2011), 한국의류산업학회
- H. K. Seo, "A Study on the Change of Hand of Chitosan-treated Fabrics(Part IV)", J. Korean Soc. Clothing and Textiles, 22(8), pp.1079~ (1998)
- S. Kawabata, "The Standardization and Analysis of Hand Evaluation, In The Hand Evaluation and Standardization Committee" (1980), The Textile Machineary Society of Japan
- 배진화, "면직물의 위사밀도 변화에 따른 역학특성 및 태", 감성과학, 8(4), pp.345~354 (2005), 한국감성과학회
- 허만우, "감즙 염색에 의한 면직물의 역학적 특성과 표면형태", 한국염색가공학회지, 24(4), pp.296~304 (2012), 한국염색가공학회
- 박명자, "양모 방축가공사 편성물의 세탁 후 역학적 특성 및 태의 변화", 한국생활환경학회지, 11(3), pp.198~205 (2004), 한국생활환경학회
- 손태원, "고농도 키토산 처리에 의한 셀룰로스 직물의 역학적 특성", 한국섬유공학회지, 40(2), pp.177~188 (2003), 한국섬유공학회
- 박명수, "신축기능성 박지 Suede 직물의 역학적 성질 변화", 한국염색가공학회지, 24(4), pp.288~295 (2012), 한국염색가공학회
- Y. S. Shin, "Effect of DP Finishing on the Mechanical Properties of Cotton Fabric", Textile Science and Engineering, 32(10), pp.919~ (1995)
- 윤보람, "전기방사한 나노섬유 웹 처리소재와 상용 투습방수소재의 역학적 특성 비교", 감성과학, 13(2), pp.391~402 (2010), 한국감성과학회
- S. K. Sung, "A Study on the Mechanical Properties of Fabrics for Korean Folk Clothes(Part 1): On the Women’s Summer Fabrics", J. Korean Soc. Clothing and Textiles, 11(3), pp.79~ (1987)
- K. H. Son, "Effect of Cellulase Treatment on Mechanical Properties and Hand of Tencel Fabrics", J. Korean Soc. Clothing and Textiles, 22(8), pp.1141~ (1998)
- S. S. Kim, "The Evaluation of Physical Properties and Hand of Bast", Man-Made Fiber Mixed Fabrics, 2000, pp.24(6), 828~
- C. I. Nam, "Effect of Surface Finishing on Tactile Properties in Wool", Tencel Blended Fabrics, 2000, pp.37(8), 479~
- M. Niwa, "Data File of the Mechanical Properties of Clothing Materials, Part2-Knitted Fabrics Used for Out Wear", Seni-Kikai Gakkashi, 29(4), pp.198~ (1976)
- K. Simpson, "Using Silver to Fight Microbial Attack", Plastics Additives & Compounding, 5(5), pp.32~ (2003)
- K. W. Oh, "Application of Silane-Chitosan Mixed Solution to Cotton Finishing(Ⅰ)", Textile Science and Engineering, 34(12), pp.822~ (1997)
- M. B. Hassan, "Comparison of Fabric Hand Assessment in the United States and Japan", Textile Res. J., 56, pp.227~ (1986)
- J. Y. Ha, "Standardization of Hand Value Evaluation Method", The Korean Fiber Society, The Symposium of Weaving Subcommittee (1988)
- S. Kawabata, "Measurement of Mechanical Properties of Thin Dress Fabrics for Hand Evaluation", J. Textile Engineering, 37(4), pp.41~ (1984)