고감성 여성의류용 소모직물의 역학특성, 외관특성 및 의류형성성능
Garment Formability, Appearance Characteristics and Mechanical Properties of Worsted Fabrics for High Emotional Women’s Fabrics
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study investigated the formability and appearance performance of 20 women’s worsted fabrics. For this purpose, 10 foreign fabrics (9 Italian + 1 Japan fabrics) were prepared and 10 domestic worsted fabrics for women were made in Cheil woolen textile company for comparing with foreign fabrics. The mechanical properties of the 20 fabrics were measured using KES-FB and FAST systems; subsequently, fabric formability (F) and total appearance value (TAV) were calculated and compared with a virtual 3-D simulation silhouette by i-designer CAD system. The fabric formability of the domestic fabrics, calculated by KES-FB system, was lower than foreign fabrics, which was assumed to be caused by the stiff tactile property. The result was similar to that of the FAST system. Good wearing performance of the foreign worsted fabric was assumed to be caused by high extensibility and the compressibility of the fabrics. The TAV’s of the domestic fabrics were also lower than foreign fabrics. Both the correlation between TAV and formability by the KESFB system and the correlation between TAV and formability by FAST system showed a good correlation coefficient. Fabric formability between KES-FB and FAST systems also showed a good correlation. The 3-D simulation silhouette of the foreign fabric by i-designer CAD system appeared superior to the domestic one, and assumed to be attributed to the low extensibility of the weft direction, stiff bending and high shear properties of the fabric.
Abstract
This study investigated the formability and appearance performance of 20 women’s worsted fabrics. For this purpose, 10 foreign fabrics (9 Italian + 1 Japan fabrics) were prepared and 10 domestic worsted fabrics for women were made in Cheil woolen textile company for comparing with foreign fabrics. The mechanical properties of the 20 fabrics were measured using KES-FB and FAST systems; subsequently, fabric formability (F) and total appearance value (TAV) were calculated and compared with a virtual 3-D simulation silhouette by i-designer CAD system. The fabric formability of the domestic fabrics, calculated by KES-FB system, was lower than foreign fabrics, which was assumed to be caused by the stiff tactile property. The result was similar to that of the FAST system. Good wearing performance of the foreign worsted fabric was assumed to be caused by high extensibility and the compressibility of the fabrics. The TAV’s of the domestic fabrics were also lower than foreign fabrics. Both the correlation between TAV and formability by the KESFB system and the correlation between TAV and formability by FAST system showed a good correlation coefficient. Fabric formability between KES-FB and FAST systems also showed a good correlation. The 3-D simulation silhouette of the foreign fabric by i-designer CAD system appeared superior to the domestic one, and assumed to be attributed to the low extensibility of the weft direction, stiff bending and high shear properties of the fabric.
참고문헌 (26)
- P. H. Dastoor, "Computer-assisted Structural Design of Industrial Woven Fabrics Part I: Need, Scope, Background, and System Architecture", Journal of the Textile Institute, 85(2), pp.89~109 (1994), Informa UK Limited[DOI]
- P. H. Dastoor, "Computer-assisted Structural Design of Industrial Woven Fabrics Part II: System Operation, Heuristic Design", Journal of the Textile Institute, 85(2), pp.110~134 (1994), Informa UK Limited[DOI]
- P. H. Dastoor, "Computer-assisted Structural Design of Industrial Woven Fabrics Part III: Modelling of Fabric Uniaxial", Biaxial Load-Deformation, 1994, pp.85(2), 135~157[DOI]
- Gaudreau, E., "The CSIRO division of wool technology", Fabric assurance by simple testing instruction manual, ~ (1989)
- J. Fan, "A Worsted Fabric Expert System", Textile Research Journal, 68(9), pp.680~686 (2016), SAGE Publications[DOI]
- J. Fan, "A Worsted Fabric Expert System", Textile Research Journal, 68(10), pp.763~771 (2016), SAGE Publications[DOI]
- R.H. Gong, "Predicting the Performance of Fabrics in Garment Manufacturing with Artificial Neural Networks", Textile Research Journal, 69(7), pp.477~482 (2016), SAGE Publications[DOI]
- Harada, T., "Inspection system of hand"HIPS"", The Textile Machinery Society of Japan, 45(5), pp.305~310 (1988)
- Jinlian Hu, "Measuring and Modeling 3D Wrinkles in Fabrics", Textile Research Journal, 72(10), pp.863~869 (2016), SAGE Publications[DOI]
- Jinlian Hu, "Classifying Fleece Fabric Appearance by Extended Morphological Fractal Analysis", Textile Research Journal, 72(10), pp.879~884 (2016), SAGE Publications[DOI]
- Kawabata, S., "The standardization and analysis of hand evaluation", The hand evaluation and standardization committee, The Textile Machinery Society of Japan, ~ (1980)
- Tae Jin Kang, "Fabric Surface Roughness Evaluation Using Wavelet-Fractal Method", Textile Research Journal, 75(11), pp.751~760 (2016), SAGE Publications[DOI]
- 김성아, "가상봉제 3D의 CAD의 특징과 활용법", 한국의류산업학회지, 7(2), pp.131~134 (2005), 한국의류산업학회
- Soo Chang Kim, "Fabric Surface Roughness Evaluation Using Wavelet-Fractal Method", Textile Research Journal, 75(11), pp.761~770 (2016), SAGE Publications[DOI]
- Kyohei TAKAHASHI, "Influence of Physical Properties of Wool Fabrics on the Poor Appearance of Jacket", Journal of Textile Engineering, 61(2), pp.17~21 (2015), The Textile Machinery Society of Japan[DOI]
- Lindberg, J., "Part III : Shearing and buckling of various commercial fabrics", Textile Research Journal, 31(2), pp.99~122 (1961)
- Ly, N. G., "Application of the FAST system to the manufacture of fabrics and garments", English International Wool Textile Research. Society, pp.370~379 (1990)
- T.J. Mahar, "FABRIC MECHANICAL AND PHYSICAL PROPERTIES RELEVANT TO CLOTHING MANUFACTURE —", International Journal of Clothing Science and Technology, 1(1), pp.12~20 (1989), Emerald[DOI]
- Masako Niwa, "Objective Evaluation of the Handle of Blankets", Textile Research Journal, 71(8), pp.701~710 (2016), SAGE Publications[DOI]
- Chang Kyu Park, "Objective Evaluation of Seam Pucker Using Artificial Intelligence", Textile Research Journal, 69(10), pp.735~742 (2016), SAGE Publications[DOI]
- Chang Kyu Park, "Objective Evaluation of Seam Pucker Using Artificial Intelligence Part II: Method of Evaluating Seam Pucker", Textile Research Journal, 69(11), pp.835~845 (2016), SAGE Publications[DOI]
- Chang Kyu Park, "Objective Evaluation of Seam Pucker Using Artificial Intelligence Part III: Using the Objective Evaluation Method to Analyze the Effects of Sewing Parameters on Seam Pucker", Textile Research Journal, 69(12), pp.919~924 (2016), SAGE Publications[DOI]
- Daniela Zavec Pavlinić, "Predicting Seam Appearance Quality", Textile Research Journal, 76(3), pp.235~242 (2016), SAGE Publications[DOI]
- R. Postle, "Measuring and Interpreting Low-Stress Fabric Mechanical and Surface Properties", Textile Research Journal, 59(8), pp.448~459 (2016), SAGE Publications[DOI]
- Shishoo, R. L., "Fabric properties and making up processes", Textile Asia, 20(2), pp.66~73 (1989)
- Shishoo, R., "Fabric tailorability", Textile Asia, 2(12), pp.64~71 (1990)