DGEBA에 대한 폴리트리아졸술폰의 강인화 효과 연구
Effect of Polytriazolesulfone Addition on Fracture Toughness of DGEBA Epoxy Resin
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study aims to investigate the effect of polytriazolesulfone(PTS) addition on fracture toughness of diglycidyl ether of bisphenol A(DGEBA) and 4,4’-diaminodiphenylsulfone( DDS). Various amounts of PTS were added to DGEBA/4,4’-DDS in diazide and dialkyne monomer forms and polymerized during the epoxy curing process. Fracture toughness(K1C), tensile properties and thermal stability of the PTS added epoxy resin were evaluated and compared with those of PES, the conventional high Tg toughening agent, added epoxy resin. Fracture toughness of the PTS added epoxy resin was dramatically improved up to 133%, as the amount of PTS added increased, whereas that of the PES added epoxy resin was improved by only 67%. The tensile strength of PTS added DGEBA/4,4’-DDS was similar to the epoxy resin without PTS and tensile modulus was improved by 20%. And thermal stability of the PTS added epoxy resin was improved up to 14%. Therefore, PTS addition to DGEBA/4,4’-DDS, as a toughening agent, is very effective way to improve its fracture toughness without any lowering in other properties.
Abstract
This study aims to investigate the effect of polytriazolesulfone(PTS) addition on fracture toughness of diglycidyl ether of bisphenol A(DGEBA) and 4,4’-diaminodiphenylsulfone( DDS). Various amounts of PTS were added to DGEBA/4,4’-DDS in diazide and dialkyne monomer forms and polymerized during the epoxy curing process. Fracture toughness(K1C), tensile properties and thermal stability of the PTS added epoxy resin were evaluated and compared with those of PES, the conventional high Tg toughening agent, added epoxy resin. Fracture toughness of the PTS added epoxy resin was dramatically improved up to 133%, as the amount of PTS added increased, whereas that of the PES added epoxy resin was improved by only 67%. The tensile strength of PTS added DGEBA/4,4’-DDS was similar to the epoxy resin without PTS and tensile modulus was improved by 20%. And thermal stability of the PTS added epoxy resin was improved up to 14%. Therefore, PTS addition to DGEBA/4,4’-DDS, as a toughening agent, is very effective way to improve its fracture toughness without any lowering in other properties.
참고문헌 (19)
- C. A. Mahieux, "Cost Effective Manufacturing Process of ThermoplasticMatrix Composites for the Traditional Industry: the Example ofCarbon-fiberReinforced Thermoplastic Flywheel", Composite Structure, 52(3), pp.517~ (2001)
- A. Toldy, "FlameRetardancy of Fibre-reinforced Epoxy Resin Composites for AerospaceApplications", PolymerDegradation and Stability, 96(3), pp.371~ (2011)
- H. Adam, "Carbon Fiber in Automotive Applications", Materials and Design, 18(4-6), pp.349~ (1997)
- J. Njuguna, "Epoxy-Based FibreReinforcedNanocomposites", Advanced EngineeringMaterials, 9(10), pp.835~ (2007)
- H. J. An, "Mechanical and Thermal Properties of Long Carbon Fiber-reinforced Polyamide 6 Composites", Fibers and Polymer, 15(11), pp.2355~ (2014)
- C. Soutis, "Carbon Fiber Reinforced Plastics in Aircraft Construction", Materials Science and Engineering : A, 412(1), pp.171~ (2005)
- X. Cheng, "Morphologies andMechanical Properties of Polyethersulfone Modified EpoxyBlends ThroughMultifunctional Epoxy Composition", J. of Applied Polymer Science, 134(18), pp.44775~ (2017)
- H. R. Azimi, "AMechanisticUnderstanding of Fatigue Crack Propagation Behavior of Rubber-Modified Epoxy Polymers", J. of Materials Science, 31(14), pp.3777~ (1996)
- P. Rosso, "AToughened EpoxyResin by SilicaNanoparticleReinforcement", J. of Applied Polymer Science, 100(3), pp.1849~ (2006)
- T. H. Hsieh, "TheMechanisms andMechanics of the Toughening of Epoxy Polymers Modified with Silica Nanoparticles", Polymer, 51(26), pp.6284~ (2010)
- J. B. Cho, "Effects ofMorphology on Toughening of Tetrafuctional Epoxy Resins with Poly Ether Imide", Polymer, 34(23), pp.4832~ (1993)
- R. D. Brooker, "Taylor, The Morphology and Fracture Properties of Thermoplastic-Toughened Epoxy Polymers", The J. of Adhesion, 86(7), pp.726~ (2010)
- K. Mimura, "Improvement of Thermal and Mechanical Properties by Control ofMorphologies in PES-modified Epoxy Resins", Polymer, 41(12), pp.4451~ (2000)
- R. M. Perez, "Novel Phosphorus-modified Polysulfone as a Combined Flame Retardant and Toughness Modifier for Epoxy Resins", Polymer, 48(3), pp.778~ (2007)
- P. V. Velthem, "Phenoxy Nanocomposite Carriers for Delivery of Nanofillers in Epoxy Matrix for Resin Transfer Molding(RTM)-Manufactured Composites", Manufacturing, 76, pp.82~ (2015)
- W. B. Ying, "Epoxy Resins Toughenedwith In SituAzide-Alkyne Polymerized Polysulfones", J. of Applied Polymer Science, 135(5), pp.45790~ (2017)
- 배진석, "Novel thermoplastic toughening agents in epoxy matrix for vacuum infusion process manufactured composites", Carbon Letters, 25(1), pp.43~49 (2018), 한국탄소학회
- W. F. Brown, "Plane Strain Crack Toughness Testing ofHigh StrengthMetallicMaterials", ASTM, 410, pp.13~ (1966)
- C. D. Doyle, "Estimating Thermal Stability of Experimental Polymers by Empirical Thermogravimetric Analysis", Analytical Chemistry, 33(1), pp.77~ (1961)