광·열경화형 수지를 이용한 탄소섬유 프리프레그의 물리적 특성
Mechanical Characteristics of CF Laminated Prepreg with UV-thermal Dual Curable Epoxy Resin
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
An issue of major concern in the utilization of laminated composites based epoxy resin is associated with the occurrence of delaminations or interlaminar cracks, which may be related to manufacturing defects or are induced in service by low-velocity impacts. A strong interfacial filament/brittle epoxy resin bonding can, however, be combined with the high fracture toughness of weak interfacial bonding, when the filaments are arranged to have alternate sections of shear stress. To improve this drawback of the epoxy resin, UV-thermal dual curable resin were developed. This paper presents UV-thermal dual curable resin which were prepared using epoxy acrylate oligomer, photoinitiators, a thermal-curing agent and thermoset epoxy resin. The UV curing behaviors and characteristics of UV-thermal dual curable epoxy resin were investigated using Photo-DSC, DMA and FTIR-ATR spectroscopy. The mechanical properties of UV-thermal dual curable epoxy resin impregnated CF prepreg by UV curable resin content were measured with Tensile, Flextural, ILSS and Sharpy impact test. The obtained results showed that UV curable resin content improves the epoxy toughness.
Abstract
An issue of major concern in the utilization of laminated composites based epoxy resin is associated with the occurrence of delaminations or interlaminar cracks, which may be related to manufacturing defects or are induced in service by low-velocity impacts. A strong interfacial filament/brittle epoxy resin bonding can, however, be combined with the high fracture toughness of weak interfacial bonding, when the filaments are arranged to have alternate sections of shear stress. To improve this drawback of the epoxy resin, UV-thermal dual curable resin were developed. This paper presents UV-thermal dual curable resin which were prepared using epoxy acrylate oligomer, photoinitiators, a thermal-curing agent and thermoset epoxy resin. The UV curing behaviors and characteristics of UV-thermal dual curable epoxy resin were investigated using Photo-DSC, DMA and FTIR-ATR spectroscopy. The mechanical properties of UV-thermal dual curable epoxy resin impregnated CF prepreg by UV curable resin content were measured with Tensile, Flextural, ILSS and Sharpy impact test. The obtained results showed that UV curable resin content improves the epoxy toughness.
참고문헌 (16)
- 서대경, "에폭시 수지 적용 아라미드 및 탄소섬유 복합재료의 물성연구", 한국염색가공학회지, 27(1), pp.11~17 (2015), 한국염색가공학회
- 박진명, "랜덤상태의 E유리 단섬유 강화 불포화 폴리에스터 기반 수지복합재료의 물성 - E유리 단섬유의 길이와 함량 및 적층수의 영향 -", 한국염색가공학회지, 27(3), pp.165~174 (2015), 한국염색가공학회
- Y. J. Park, "UV- and Thermal-curing Behaviors of Dual-curableAdhesives based on EpoxyAcrylateOligomers", Adhesion and Adhesives, 29, pp.710~ (2009)
- K. Dietliker, "Chemistry and Technology of UV and EB Formulation for Coatings Inks and Paints", SITA Technology, 3(3), pp.113~ (1991)
- M. Sangermano, "Antistatic Epoxy Coatings With Carbon Nanotubes Obtained byCationicPhotopolymerization", Macromolecular Rapid Communication, 29, pp.396~ (2008)
- D. Kunwong, "CuringBehavior of aUV-curableCoating based onUrethane Acrylate Oligomer: the Influence of Reactive Monomers", SJST, 33(2), pp.201~ (2011)
- F. Chen, "CuringKinetics andMorphology of IPNs from a Flexible Dimethacrylate and a Rigid Epoxy via Sequential Photo and Thermal Polymerization", European Polymer J, 44, pp.1796~ (2008)
- S. Garoushi, "ShortGlass Fiber Reinforced Restorative Composite Resin with Semi-inter Penetrating PolymerNetworkMatrix", Dental Materials, 23, pp.1356~ (2007)
- D. Abraham, "Glass Fibre Epoxy CompositeCureMonitoring using Parallel PlateDielectricAnalysis inComparisonwith Thermal andMechanical Testing Techniques", Composites Part A, 29A, pp.811~ (1998)
- Y. C. Kim, "Synthesis andCharacterization ofUV-curableAliphatic EpoxyAcrylate", J. of Adhesion and Interface, 10(4), pp.191~ (2009)
- 장진호, "폴리우레탄 디아크릴레이트의 미세다공성 UV코팅에 의한 PET 직물의 투습방수가공", 한국염색가공학회지, 22(3), pp.239~245 (2010), 한국염색가공학회
- J. Y. Choi, "Preparation and Properties of UV-Curable Polyurethane Acrylates(Ⅰ)", J. of the Korean Society of Dyers and Finishers, 11(4), pp.1~ (1999)
- S. M. Krishnan, "Studies on Corrosion Resistant Properties of Sacrificial Primed IPNCoating Systems in Comparison with Epoxy-PU Systems", Progress in Organic Coatings, 57, pp.383~ (2006)
- S. Ebnesajjad, "Handbook of Adhesives and Surface Preparation", pp.221~243 (2011), Elsevier
- S. Fawzia, "Experimental and Finite ElementAnalysis of aDouble Strap Joint between Steel Plates and Normal Modulus CFRP", Composite Structures, 75, pp.156~ (2006)
- 김성현, "광경화성 아크릴 수지의 경화특성에 관한 연구", 폴리머, 34(5), pp.469~473 (2010), 한국고분자학회