터보챠저 저어널 베어링에서 물과 윤활유가 혼합될 때 베어링 성능에 관한 연구
Study on Bearing Performance Involving the Mixture of Water within Engine Oil in a Turbocharger Journal Bearing
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
In this study, using the governing equations for thermohydrodyamic lubrication involving the homogeneous mixture of incompressible fluid derived by based on the principle of continuum mechanics, it is discussed the effects of water dispersed within engine oil on the performance of high speed journal bearing of a turbocharger. The governing equations are the general equations being able to be applied on the mixture of Newtonian fluid and non-Newtonian fluid. Here, the fluid viscosity index, n of power-law non-Newtonian fluid is supposed to be 1 for the application of the journal bearing on a turbocharger lubricated with the mixture of two Newtonian fluids, water dispersed within engine oil. The results related with the bearing performance are showed that the friction force and bearing load capacity decrease as increasing the volume percent of water.
Abstract
In this study, using the governing equations for thermohydrodyamic lubrication involving the homogeneous mixture of incompressible fluid derived by based on the principle of continuum mechanics, it is discussed the effects of water dispersed within engine oil on the performance of high speed journal bearing of a turbocharger. The governing equations are the general equations being able to be applied on the mixture of Newtonian fluid and non-Newtonian fluid. Here, the fluid viscosity index, n of power-law non-Newtonian fluid is supposed to be 1 for the application of the journal bearing on a turbocharger lubricated with the mixture of two Newtonian fluids, water dispersed within engine oil. The results related with the bearing performance are showed that the friction force and bearing load capacity decrease as increasing the volume percent of water.
참고문헌 (17)
- Hamaguchi, H, "Elastohydrodynamic Properties of Water in Oil Emulsions", Wear, 43, pp.17~24 (1977)
- A Rheology Model for Oil-in-Water, "Dow, T", ~, pp.CASA Technical Paper #Ms77-339 (1977)
- Nakahara, T, "Observations of Liquid Droplet Behavior and Oil Film Formation in O", W Type Emulsion Lubrication, 1988, pp.110, 348~353
- Lunberg, J, "Rheological Model of a Dilute Emulsion", STLE Tribology Transactions, 31, pp.83~90 (1988)
- Paranjpe, R. S, "Analysis of Non-Newtonian Effects in Dynamically Loaded Finite Journal Bearings Including Mass Conserving Cavitation", ASME Journal of Tribology, 114, pp.736~744 (1992)
- Dien, I. K, "A Generalized Steady-State Reynolds Equation for non-Newtonian Fluids, with Application to Journal Bearings", J. Lubrication Technology, 105, pp.385~390 (1983)
- Nayfeh, A. H, "Perturbation Methods" (1973), John Wiley & Sons, Inc
- Dai, F, "A Theory of Hydrodynamic Lubrication Involving the Mixture of Two Fluids", Int. J. Engng. Sci, 61, pp.634~641 (1994)
- Taylor, C. M, "Turbulent Lubrication Theory Applied to Fluid Film Bearing Design", Proc. Inst. Mech. Engrs, 184, pp.40~47
- Constantinescu, V. N, "Basic Relationships in Turbulent Lubrication and Their Extension to Include Thermal Effects", Trans. of the ASME, J. of Lubrication Technology, 95, pp.147~154 (1973)
- Safar, Z, "Thermohydrodynamic Lubrication in Laminar and Turbulent Regimes", Trans. of the ASME, J. of Lubrication Technology, 96, pp.48~57 (1974)
- Chun, S. M, "Parametric Study of Inlet Oil Temperature and Pressure for a Half-Circumferential Grooved Journal Bearing", STLE Tribology Transaction, 35(2), pp.213~224 (1992)
- Chun, S. M, "Aeration Effects on the Performance of a Turbocharger Journal Bearing", Tribology International, 41, pp.296~306 (2008)
- Chun, S. M., "A Parametric Study on bubble lubrication of High-Speed Journal Bearings", Tribology International, 35(1), pp.1~13 (2002)
- Gazley, C. Jr, "Heat-Transfer Characteristics of the Rotational and Axial flow Between Concentric Cylinders", Trans. Of the ASME, 80, pp.79~90 (1958)
- Holman, J. P, "Heat Transfer, 9th edition, Appendix A, Table A-9" (2002), McGraw-Hill Companies, Inc
- Chun, S. M, "Study on Mixing Flow Effects in a High-Speed Journal Bearing", Tribology International, 34(6), pp.397~405 (2001)