고속 열유체 저어널 베어링에서 단일유체로서의 다등급 엔진 오일과 그 첨가액체들의 혼합물에 대한 성능 비교
The Performance Comparison between the Mixture of Each Liquid to be Blended and Multi-grade Engine Oil as a Single Fluid in a High Speed Thermo-hydrodynamic Journal Bearing
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
To product multi-grade oil like engine oil, a sort of mineral base oil is mixed with a fundamental additive liquid package and a polymer liquid as viscosity index improver in order to improve the lubricating property of oil. That is, engine oil is the mixture of more than two fluids. In this paper, it will be systematically organized the governing equation describing non-Newtonian thermo-hydrodynamic lubrication related with the mixture of incompressible fluids based on the principle of continuum mechanics. Then, in order to find how the thermal analysis effect on the bearing performance lubricated with the mixture of multi-fluids, it will be compared to the performances between the mixture of each liquid to be blended and multi-grade engine oil as a single fluid in a high speed journal bearing. It is found that, in the case of lower viscosity oil, the difference of pressure distribution between the above two cases turns out to be existed, even if the load capacity is same level.
Abstract
To product multi-grade oil like engine oil, a sort of mineral base oil is mixed with a fundamental additive liquid package and a polymer liquid as viscosity index improver in order to improve the lubricating property of oil. That is, engine oil is the mixture of more than two fluids. In this paper, it will be systematically organized the governing equation describing non-Newtonian thermo-hydrodynamic lubrication related with the mixture of incompressible fluids based on the principle of continuum mechanics. Then, in order to find how the thermal analysis effect on the bearing performance lubricated with the mixture of multi-fluids, it will be compared to the performances between the mixture of each liquid to be blended and multi-grade engine oil as a single fluid in a high speed journal bearing. It is found that, in the case of lower viscosity oil, the difference of pressure distribution between the above two cases turns out to be existed, even if the load capacity is same level.
참고문헌 (17)
- Dai, F., "A Theory of Hydrodynamic Lubrication Involving the Mixture of Two Fluids", Trans. of the ASME, Journal of Applied Mechanics, 61, pp.634~641 (1994)
- Boncompain, R., "Analysis of Thermal Effects in Hydrodynamic Bearings", Trans. of the ASME, Journal of Tribology, 108, pp.219~224 (1986)
- Dien, I. K., "A Generalized Steady- State Reynolds Equation for non-Newtonian Fluids, with Application to Journal Bearings", J. Lubrication Technology, 105, pp.385~390 (1983)
- Nayfeh, A. H., "Perturbation Methods" (1973), John Wiley & Sons, Inc.
- Paranjpe, R. S., "Analysis of Non-Newtonian Effects in Dynamically Loaded Finite Journal Bearings Including Mass Conserving Cavitation", Trans. of the ASME, Journal of Tribology, 114, pp.736~744 (1992)
- 전상명, "터빈오일과 물이 혼합될 때 증기터빈 선박엔진 저어널 베어링의 열유체윤활 해석", 한국윤활학회지, 27(2), pp.77~87 (2011), 한국윤활학회
- 전상명, "터보챠저 저어널 베어링에서 물과 윤활유가 혼합될 때 베어링 성능에 관한 연구", 한국윤활학회지, 27(4), pp.183~192 (2011), 한국윤활학회
- Taylor, C. M., "Turbulent Lubrication Theory Applied to Fluid Film Bearing Design", Proc. Inst. Mech. Engrs., 184, pp.40~47 (1970)
- Constantinescu, V. N., "Basic Relationships in Turbulent Lubrication and Their Extension to Include Thermal Effects", Trans. of the ASME, J. of Lubrication Technology, 95, pp.147~154 (1973)
- Safar, Z., "Thermohydrodynamic Lubrication in Laminar and Turbulent Regimes", Trans. of the ASME, J. of Lubrication Technology, 96, pp.48~57 (1974)
- Chun, S. M., "Parametric Study of Inlet Oil Temperature and Pressure for a Half-Circumferential Grooved Journal Bearing", STLE Tribology Transaction, 35(2), pp.213~224 (1992)
- Chun, S. M., "Aeration Effects on the Performance of a Turbocharger Journal Bearing", Tribology International, 41, pp.296~306 (2008)
- Chun, S. M., "A Parametric Study on bubble lubrication of High-Speed Journal Bearings", Tribology International, 35(1), pp.1~13 (2002)
- Gazley, C. Jr., "Heat-Transfer Characteristics of the Rotational and Axial flow Between Concentric Cylinders", Trans. Of the ASME, 80, pp.79~90 (1958)
- Chun, S. M., "Study on Mixing Flow Effects in a High-Speed Journal Bearing", Tribology International, 34(6), pp.397~405 (2001)
- Chen, Chun I., "Typical Lubricating Oil Properties (Chapter 1), Tribology Data Hand Book", pp.28~29 (1997), CRC Press LLC
- Michael M. Khonsari, "Applied Tribology-Bearing Design and Lubrication, 2nd Edition", pp.216~ (2008), John Wiley & Sons Ltd.