슈퍼 섬유를 활용한 일체형 Shock Energy Absorber Lanyard Protection Tube 제조 및 특성분석
Characteristic and Development of All-in-one Shock Energy Absorber Lanyard Protection Tube used Super Fibers
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Work-related falls are a major problem in the construction and roofing industries. To avoid serious injury to the worker caused by high decelerations or forces, different systems to absorb the energy of a fall are implemented in personal protective equipment. In this study, shock energy absorber lanyard protection tube was prepared using high tenacity PET fiber, P-aramid fiber, and UHMWPE fiber, respectively. Dynamic load test and static load test, bursting strength test based on the Korea fall protection equipment standard(Korea Occupational Safety & Health Agency standard 2013-13) or conformity European safety test(CE : EN355) were conducted. Especially maximum arrest force by dynamic load test of energy absorber showed below 6,000N.
Abstract
Work-related falls are a major problem in the construction and roofing industries. To avoid serious injury to the worker caused by high decelerations or forces, different systems to absorb the energy of a fall are implemented in personal protective equipment. In this study, shock energy absorber lanyard protection tube was prepared using high tenacity PET fiber, P-aramid fiber, and UHMWPE fiber, respectively. Dynamic load test and static load test, bursting strength test based on the Korea fall protection equipment standard(Korea Occupational Safety & Health Agency standard 2013-13) or conformity European safety test(CE : EN355) were conducted. Especially maximum arrest force by dynamic load test of energy absorber showed below 6,000N.
참고문헌 (15)
- A. B. Spierings, "Methodology for the Development of an Energy Absorber Application to Worker Security Rope", International J. of Impact Eng, 32, pp.1370~ (2006)
- C. A. Janicak, "Fall-reated Deaths in the Construction Industry", J. of Safety Research, 29(1), pp.35~ (1998)
- A. Suruda, "Fatal Work-related Falls from Roofs", J. of Safety Research, 26(1), pp.1~ (1995)
- H. Tanaka, "US Pat. 7677360B2", ~ (2010)
- T. Russell, "US Pat. 8316988B2", ~ (2012)
- S. W. Kim, "Korea Pat. 20-0354542", ~ (2004)
- P. Kines, "Construction Workers Falls through Roofs: Fatal Versus Serious Injuries", J. of Safety Research, 33(2), pp.195~ (2002)
- Y. M. Goh, "Adequacy of Personal Fall Arrest Energy Absorbers in Relation to Heavy Workers", Safety Science, 48, pp.747~ (2010)
- K. Baszczynski, "Influence of Weather Conditions on the Performance of Energy Absorbers and Guided Type Fall Arresters on a Flexible Anchorage Line during Fall Arresting", Safety Science, 42, pp.519~ (2004)
- J. M. Yoon, "A Study on Development of Safety Rope using Wire Rope at the Construction Site", 석사, pp.2012
- K. Baszczynski, "The Influence of Anchor Devices on the Performance of Retractable Type Fall Arresters Protection against Falls from a Height", International J. of Occupational Safety and Ergonomics, 12(3), pp.307~ (2006)
- K. Baszczynski, "Dynamic Strength Tests for Low Elongation Lanyards", International J. of Occupational Safety and Ergonomics, 13(1), pp.307~ (2007)
- S. Lehner, "Senner, Mathematical Model of the Energy Absorbing Stitch Brake used in via Ferrata Climbing", Procedia Engineering, 34, pp.652~ (2012)
- 배현숙, "산업현장을 고려한 작업복 소재의 역학적 특성 연구", 한국염색가공학회지, 25(2), pp.140~151 (2013), 한국염색가공학회[DOI]
- 박성민, "저온 플라즈마 처리를 이용한 파라 아라미드 섬유의 표면 개질 효과 및 역학적 특성", 한국염색가공학회지, 24(2), pp.131~137 (2012), 한국염색가공학회[DOI]