전자빔 조사에 의하여 경화된 유리섬유 강화불포화 폴리에스테르 복합재료의 물성
Properties of Glass Fiber-Reinforced Unsaturated Polyester Composites Cured by Electron Beam Irradiation
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, glass fiber-reinforced unsaturated polyester (GFRUP) composites werecured by electron beam irradiation (EBI). The properties of the EBI-cured GFRUP compositeswere dependent on the absorbed dose. The analytical results revealed that the properties of theEBI-cured GFRUP composites were comparable to those of those of GFRUP composites curedby the conventional sheet molding compound method. Therefore, the curing by EBI can be aneffective and eco-friendly method for the mass production of GFRUP composites.
Abstract
In this study, glass fiber-reinforced unsaturated polyester (GFRUP) composites werecured by electron beam irradiation (EBI). The properties of the EBI-cured GFRUP compositeswere dependent on the absorbed dose. The analytical results revealed that the properties of theEBI-cured GFRUP composites were comparable to those of those of GFRUP composites curedby the conventional sheet molding compound method. Therefore, the curing by EBI can be aneffective and eco-friendly method for the mass production of GFRUP composites.
참고문헌 (17)
- Drobny JG., "Radiation technology beam for polymers", pp.18~ (2010), CRC Press, Taylor & Francis Group
- Fuchs ERH, "Strategic materials selection in the automobile body: Economic opportunities for polymer composite design", Compos. Sci. Technol, 68, pp.1989~2002 (2008)
- Imielińska K, "Air-coupledultrasonic C-scan technique in impact response testing of carbon fibre and hybrid: glass, carbon and Kevlar", epoxy composites, 2004, pp.157-158, 513~522
- 정의민, "전자빔 후경화를 이용한 유리섬유 강화 비닐 에스테르 복합재료의 기계적 물성", 방사선산업학회지, 13(2), pp.127~132 (2019), (사)한국방사선산업학회[DOI]
- Koronis G, "Green composites: A review of adequate materials for automotive applications", Compos. A, 44, pp.120~127 (2013)
- 권혁, "경화도에 따른 고분자 기지 복합재의 경화 수축률 거동", Composites Research, 27(3), pp.90~95 (2014), 한국복합재료학회
- 이평찬, "SMC 복합소재에 따른 테일게이트의 구조 강성 해석 연구", 한국자동차공학회 논문집, 27(7), pp.537~541 (2019), 한국자동차공학회[DOI]
- Li XG, "Decomposition kinetic characteristics of calcium carbonate containing organic acids by TGA", Arab. J. Chem, 10, pp.S2534~S2538 (2017)
- Misumi J, "Experimental characterization of tensile properties of epoxy resin by using micro-fiber specimens", J. Reinf. Plast. Compos, 35, pp.1792~1801 (2016)
- Nam JD, "High performance thermoset composites", Polym. Sci. Technol, 6, pp.459~469 (1995)
- Palmer J, "Sheet moulding compound (SMC) from carbon fibre recyclate", Compos. A, 41, pp.1232~1237 (2010)
- Pan LL, "Fire retardant mech-anism analysis between ammonium polyphosphate and triphenyl phosphate in unsaturated polyester resin", Polym. Degrad. Stabil, 97, pp.1801~1806 (2012)
- 박상원, "전자빔 조사에 의하여 후경화된 비닐 에스테르 수지 상온 경화물의 기계적 물성", 폴리머, 41(2), pp.276~279 (2017), 한국고분자학회[DOI]
- 박상원, "전자빔 조사에 의한 불포화 폴리에스터 수지 상온 경화물의 후경화", 폴리머, 42(5), pp.784~787 (2018), 한국고분자학회[DOI]
- Saba N, "Mechanical properties of kenaf fibre reinforced polymer composite: A review", Constr. Build. Mater, 76, pp.87~96 (2015)
- 심현석, "In-mold Decoration 포일에 사용되는 경질 코팅 수지의 전자빔 경화", 폴리머, 35(2), pp.141~145 (2011), 한국고분자학회
- Um MK, "A study of cure kinetics by the use of dynamic differential scanning calorimetry", Compos. Sci. Technol, 62, pp.29~40 (2002)