폴리프로필렌 수지 복합을 위한 텐셀 재생섬유의 소수화 표면개질 특성 연구
A Study on the Hydrophobicity Modification and Physical Properties of Tencel Regenerated Fibers for Polypropylene Resin Composites
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study conducted on the introduction of recycled cellulose fibers, which are widely used in the textile industry as eco-friendly biomass materials, into polypropylene resins, which are mainly used for interior and exterior materials such as door trims and console parts of automobiles. In general, cellulose fibers can affect mechanical properties and have a lightening effect when used as a reinforcing agent. However, since cellulose fibers have hydrophilic properties and have relatively low compatibility with industrial polymer resins, they are used in combination through fiber hydrophobic surface treatment. Therefore, through this study, the reforming reaction conditions optimized in terms of hydrophobicity and workability for cellulose fibers are studied. Furthermore, polypropylene containing surface-modified cellulose fibers was prepared to compare physical properties by fiber content and study optimized content.
Abstract
This study conducted on the introduction of recycled cellulose fibers, which are widely used in the textile industry as eco-friendly biomass materials, into polypropylene resins, which are mainly used for interior and exterior materials such as door trims and console parts of automobiles. In general, cellulose fibers can affect mechanical properties and have a lightening effect when used as a reinforcing agent. However, since cellulose fibers have hydrophilic properties and have relatively low compatibility with industrial polymer resins, they are used in combination through fiber hydrophobic surface treatment. Therefore, through this study, the reforming reaction conditions optimized in terms of hydrophobicity and workability for cellulose fibers are studied. Furthermore, polypropylene containing surface-modified cellulose fibers was prepared to compare physical properties by fiber content and study optimized content.
참고문헌 (14)
- M. R. K. Sofla, "Cellulose Nanofibres from Bagasse using a High Speed Blender and Acetylation as a Pretreatment", Cellulose, 26, pp.4799~ (2019)
- J. Xu, "Acetylated Cellulose Nanocrystals with High-crystallinity Obtained by One-step Reaction from the Traditional Acetylation of Cellulose", Carbohydrate Polymers, 229(1), pp.31221~ (2020)
- M. Jonoobi, "Preparation of Cellulose Nanofibers with Hydrophobic Surface Characteristics", Cellulose, 17, pp.299~ (2010)
- N. Lin, "Surface Acetylation of Cellulose Nanocrystal and its Reinforcing Function in Poly(lactic acid)", Carbohydrate Polymers, 83(4), pp.1834~ (2011)
- C. J. Wijaya, "Hydrophobic Modification of Cellulose Nanocrystals from Bamboo Shoots Using Rarasaponins", ACS Omega, 5(33), pp.20967~ (2020)
- Z. Zhang, "Ultralightweight and Flexible Silylated Nanocellulose Sponges for the Selective Removal of Oil from Water", Chemistry of Materials, 26(8), pp.2659~ (2014)
- V. K. Thakur, "Development of Functionalized Cellulosic Biopolymers by Graft Copolymerization", International Journal of Biological Macromolecules, 62, pp.44~ (2013)
- M. Andresen, "Water-in-oil Emulsions Stabilized by Hydrophobized Microfibrillated Cellulose", Journal of Dispersion Science and Technology, 28(6), pp.837~ (2007)
- 이종희, "표면 개질된 마이크로피브릴화 셀룰로오스를 이용한 폴리아마이드 섬유와의 복합페이퍼 제조 및 특성평가", 폴리머, 38(1), pp.74~79 (2014), 한국고분자학회[DOI]
- 박현지, "수계에서 반응 가능한 실란화를 통한 셀룰로오스나노피브릴의 소수화", 펄프종이기술, 50(3), pp.72~77 (2018), 한국펄프·종이공학회[DOI]
- M. K. Thakur, "Surface Modification of Cellulose using Silane Coupling Agent", Carbohydrate polymers, 111(13), pp.849~ (2014)
- C. Gousse, "Surface Silylation of Cellulose Microfibrils : Preparation and Rheological Properties", Polymer, 45(1), pp.569~ (2004)
- Y. Xie, "Silane Coupling Agents used for Natural Fiber", polymer Composites, a Review, 2010, pp.41(7), 806~
- Z. Zhang, "Controlled Silylation of Nanofibrillated Cellulose in Water, Reinforcement of a Model Polydimethylsiloxane Network", Chem Sus Chem, 8(16), pp.2681~ (2015)