엔진커버용 폴리프로필렌/유리섬유/대나무섬유 복합체의 물리적 특성에 대한 대나무섬유의 용제 처리의 영향
Effects of Solvent Treatment of Bamboo Fiber on Physical Properties of Polypropylene/Glass Fiber/Bamboo Fiber Composite
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the effects of surface treatment of bamboo fiber on the physical properties of polypropylene(PP)/glass fiber(GF)/Bamboo fiber(BF) composite for engine cover were investigated. PP, GF and BF were fixed at 40%, 40% and 20% and the surface of bamboo fibers were treated to 0.5, 1.0 and 2.0% as an acid and alkali solution. PP/GF/BR composites using surface treated bamboo fibers were prepared and their tensile strength, bursting strength and impact strength were measured by universal testing machine( UTM). The composites with alkali treated bamboo fiber showed better mechanical properties than the acid treated composites. It was checked that the optimum alkali content was at 1.0% from the results of mechanical properties. The effect of surface treatment on the mechanical properties was confirmed by SEM images of fractured surface.
Abstract
In this study, the effects of surface treatment of bamboo fiber on the physical properties of polypropylene(PP)/glass fiber(GF)/Bamboo fiber(BF) composite for engine cover were investigated. PP, GF and BF were fixed at 40%, 40% and 20% and the surface of bamboo fibers were treated to 0.5, 1.0 and 2.0% as an acid and alkali solution. PP/GF/BR composites using surface treated bamboo fibers were prepared and their tensile strength, bursting strength and impact strength were measured by universal testing machine( UTM). The composites with alkali treated bamboo fiber showed better mechanical properties than the acid treated composites. It was checked that the optimum alkali content was at 1.0% from the results of mechanical properties. The effect of surface treatment on the mechanical properties was confirmed by SEM images of fractured surface.
참고문헌 (12)
- A. K. Mohanty, "Polym", Mater. Sci. Eng, 85, pp.594~ (2001)
- E. Bodros, "Compos", Sci. Technol, 67, pp.462~ (2007)
- C. A. Fuentes, "Effect of Interfacial Adhesion on Mechanical Behavior of Bamboo Fiber Reinforced Thermoplastic Composites", European Conference on Composite Material, pp.24~28 (2012)
- G. F. Cai, "Effects of Toughening Agents on the Behaviors ofBamboo PlasticComposites", Polym. Compos, 32, pp.1945~ (2011)
- H. Liu, "Compatibilizing and TougheningBamboo Flour FilledHDPE Composites: Mechanical Properties and Morphologies", Compos, Part A, 39, pp.1891~ (2008)
- 이종혁, "이축 압출공정을 이용한 Wood Polymer Composite의 제조 및 특성 분석", 엘라스토머 및 콤포지트, 46(3), pp.211~217 (2011), 한국고무학회
- T. Panuikallio, "Influence ofMaleated Polypropylene onMecanical Properties of Composites made of Viscos Fiber and Polypropylene", J. Appl. Polym. Sci, 87, pp.1895~ (2003)
- A. K. Mohanty, "Naturally Cyclable Biocomposites", pp.13~21, Elastomers and Composites
- F. T. Wallenberger, "Natural Fibers, Plastics and Composites", pp.3~7 (2004), Kluwer Academic Publishers
- I. Kellersztein, "Chemical Surface Modification of Wheat Straw Fibers for Polypropylene Rein-forcement", Polymer Composites, Israel, 37, pp.2133~ (2015)
- S. K. Chattopadhyay, "Bamboo FiberReinforced Polypropylene Composites and Their Mechanical, Thermal and Morphologycal Properties", J. Appl. Polym, 119, pp.1619~ (2011)
- 이범희, "폴리프로필렌", 대나무 섬유 복합체의 물리적 물성에 대한 에틸렌-옥텐 공중합체 및 대나무 섬유 알카리 처리의 영향, 2016, pp.40(4), 607~613[DOI]