A study on corrosion of distance piece on Exhaust Gas Cleaning Systems (EGCS) discharge water line
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
An exhaust gas cleaning system (EGCS) is a requisite in ships for complying with the IMO 2020 global sulfur limit requirements. However, corrosion in the distance piece between the EGCS overboard valve and ship hull can cause a large amount of seawater to enter the engine room. Although the distance piece is constructed according to an approved design employing steel piping with an epoxy coating, acidic wash water still comes into contact and reacts with the steel pipe. This is most likely caused by a defect in the epoxy coating or damage to the coating incurred during pipe installation. The results of this study show the importance of maintaining cleanliness during surface treatment and proper painting thickness during pipe installation. This study focuses on the importance of selecting the correct design and appropriate materials for the EGCS discharge water distance piece.
Abstract
An exhaust gas cleaning system (EGCS) is a requisite in ships for complying with the IMO 2020 global sulfur limit requirements. However, corrosion in the distance piece between the EGCS overboard valve and ship hull can cause a large amount of seawater to enter the engine room. Although the distance piece is constructed according to an approved design employing steel piping with an epoxy coating, acidic wash water still comes into contact and reacts with the steel pipe. This is most likely caused by a defect in the epoxy coating or damage to the coating incurred during pipe installation. The results of this study show the importance of maintaining cleanliness during surface treatment and proper painting thickness during pipe installation. This study focuses on the importance of selecting the correct design and appropriate materials for the EGCS discharge water distance piece.
참고문헌 (6)
- American Bureau of Shipping, "Guide for Exhaust Emission Abatement", 13~ (2018)
- Korea Register of Shipping, "Guide for Exhaust gas Emission Abatement System", 23~24 (2020)
- A. B. Adams Jr., "Corrosion problems with wet scrubbing equipment", Journal of the Air Pollution Control Association, 26(4), pp.303~307 (1976)
- 정진아, "Corrosion Behavior of Carbon Steel in Diluted Sulfuric Acid based on Seawater", CORROSION SCIENCE AND TECHNOLOGY, 18(3), pp.78~85 (2019), 한국부식방식학회[DOI]
- "SOx Scrubber Overboard Pipe Failure"[URL]
- ClassNK, "Corrosion of distance piece on SOx scrubber discharge water line, TEC-1205", NIPPON KAIJI KYOKAI (ClassNK), ~ (2020)