본문 바로가기
KERD
논문KCI 등재

액체수소 저장탱크용 고효율 지지 시스템 개발 및 해석

Development and Analysis of the Highly Efficient Support System in a Liquid Hydrogen Vessel

박동훈|윤상국
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)|2007.05|한국마린엔지니어링학회지 (Journal of Advanced Marine Engineering and Technology)|제31권 제4호|pp. 363-369

0

조회

0

다운로드

1

인용

0

참고문헌

키워드

Cryogenic liquid storage vessel(초저온 액체 저장탱크)Support system(지지 시스템)Heat transfer rate(전열량)Spherical ball(구형 볼)기호설명
주제분류기계공학

초록

Abstract

Probably the most significant heat transfer in the cryogenic liquid hydrogen storage tank from the atmosphere may occur through its support system. In this paper the efficient support system for the cryogenic storage vessel was newly developed and analysed. The support system was composed of a spherical ball as a supporter to reduce the contact area, which is located between two supporting SUS tubes inserted SUS and PTFE blocks. Numerical analyses for temperature distribution, and the thermal stress and strain of the support system were performed by the commercial codes FLUENT and ANSYS. The heat transfer rate of the supporter was evaluated by the thermal boundary potential method which can consider the variation of thermal conductivity with temperature.The results showed that the heat transfer rate through the developed supporter compared with the common SUS tube supporter was significantly reduced. The thermal stress and strain were obtained well below the limited values. It was found that the developed supporter can be one of the most efficient support systems for cryogenic liquid storage vessel.

참고문헌 (11)

  1. "Cryogenic Equipment of Liquid Hydrogen Powered Automobiles", pp.1777~1781 (1990)
  2. "Self-pressurization of a Flight Weight Liquid Hydrogen Storage Tank Subjected to Low Heat Flux", pp.37~42 (1991), Lin CS
  3. "Design Characteristics and Performance of a Liquid Hydrogen Tank System for Motor Cars", pp.327~329 (1992)
  4. "Insulated Pressure Vessels for Hydrogen Storage on Vehicles", 3(7), pp.583~591 (1998)
  5. "Analytical and Experimental Evaluation of Insulated Pressure Vessels for Cryogenic Hydrogen Storage", 25, pp.1075~1085 (2000)
  6. "Hybrid Hydrogen Storage Vessel, a Novel High-pressure Hydrogen Storage Vessel Combined with Hydrogen Storage Material", 28, pp.1121~1129 (2003)
  7. "Thermal Test of the Insulation Structure for LH2 Tank by Using the Large Experimental Apparatus", 40, pp.737~748 (2000)
  8. "Task III-E. Experimental Design & Evaluation of ZBO of Cryogenic Systems" (2004)
  9. "극저온액체 저장용기에서 열전도 차폐단의 영향", 9(4), pp.169~176 (1998)
  10. "Thermal Design Analysis of a Liquid Hydrogen Vessel", 25, pp.133~141 (2000)
  11. "1977년 성균관대학교 화학공학과 졸업 1989년 Southampton대학교 초저온공학과 졸업 2 한국해양대학교 냉동공조에너지시스템 공학과 졸업 현재 한국해양대학교 대학원 냉동공조공학과 석사과정", pp.30~94, Pressure Component Construction Design and Materials Application 1982년 연세대학교 대학원졸업 1993～현재 한국해양대학교 기계정보공학부 교수 박동훈

관련 논문AI추천

LH2 저장 탱크의 서포트 설계곽효서한국기계기술학회 · 한국기계기술학회지2025 · 제27권 제1호액체수소 저장 탱크 서포트의 열-구조 연성 해석곽효서한국기계기술학회 · 한국기계기술학회지2024 · 제26권 제3호열-구조 연성 해석을 통한 액체수소 저장 탱크의 지지대 직경 설계곽효서한국기계기술학회 · 한국기계기술학회지2024 · 제26권 제5호액체수소 저장 탱크의 서포트 개수에 따른 열-구조 연성 해석곽효서한국기계기술학회 · 한국기계기술학회지2024 · 제26권 제4호액체수소 저장 탱크의 돔부 형상에 따른 열-구조 연성해석곽효서한국기계기술학회 · 한국기계기술학회지2023 · 제25권 제6호LH2 저장 탱크 서포트의 위상 최적화곽효서한국기계기술학회 · 한국기계기술학회지2025 · 제27권 제1호

이 간행물의 다른 논문 (17건)

Dynamic Characteristics of a Urea SCR Systemfor NOx Reduction in Diesel EngineJeong-Gil Nam, Jae-Sung Choipp. 235-242Fuzzy Control with Feedforward Compensator of Superheat in a Variable Speed Refrigeration SystemJung-In Yoon, Li Hua, Dong-Woo Lee, Seok-Kwon Jeongpp. 252-262Numerical Simulation of Gaseous Flow in Microchannel이연원, Md. Tajul Islam, Jong-Hoon Leepp. 272-281Experimental Study and Numerical Modeling of Keyhole Behavior during CO2 Laser WeldingByung-Lea Kil, Jong-Do Kim, 오진석pp. 282-292A DC Motor Speed Control by Selection of PID Parameter using Genetic Algorithm유희한, Yun-Hyung Leepp. 293-300
원문 보기