Experimental Study and Numerical Modeling of Keyhole Behavior during CO2 Laser Welding
3
조회
0
다운로드
0
인용
0
참고문헌
초록
Abstract
The present paper describes the results of high speed photography, acoustic emission (AE) detection and plasma light emission (LE) measurement during CO₂laser welding of 304 stainless steel in different processing conditions. Video images with high spatial and temporal resolution allowed to observe the melt dynamics and keyhole evolution. The existence of keyhole was confirmed by the slag motion on the weld pool. The characteristic frequencies of flow instability and keyhole fluctuations at different welding speed were measured and compared with the results of Fourier analyses of temporal AE and LE spectra. The experimental results were compared with the newly developed numerical model of keyhole dynamics. The model is based on the assumption that the propagation of front part of keyhole into material is due to the melt ejection driven by laser induced surface evaporation. The calculations predict that a high speed melt flow is induced at the front part of keyhole when the sample travel speed exceeds several 10 mm/s. The numerical analysis also shows the hump formation on the front keyhole wall surface. Experimentally observed melt behavior and transformation of the AE and LE spectra with variation of welding speed are qualitatively in good agreement with the model predictions.
참고문헌 (7)
- "Electron and Laser Beam Technology -Development and Use in Material Processing-", pp.641~650 (1986)
- "Dynamic Behavior of Laser-induced Plasma and keyhole in Pulsed Laser Welding", pp.11~13 (2001)
- "Diagnostics of Laser-induced Plasma in Welding of Aluminum Alloy", 261(263), pp.2671~1676 (2004)
- "Observation of Dynamic Behavior in Primer-coated Steel Welding by CO2 Laser", 124(126), pp.1425~1428 (2007)
- "Dynamics of Penetration Depth during Laser Welding", pp.830~837 (1994)
- "Modeling of Deep Penetration Laser Welding Process - Application to the Analysis of the Energy Coupling inside the Keyhole -", pp.979~988
- "A Concept for a Hydrodynamic Model of Keyhole Formation and Support during Laser Welding pp. 641-650.Author ProfileJong-Do KimHe received the B.A. degree in Marine Engineering from Korea Maritime University in 1985 And he received the M.Eng. and Ph.D degrees in Laser Welding Engineering from Osaka University in 1995 and 1997. From 1997 to 1998 he was a Research Fellow in JWRI of Osaka University. Since 1998 he has been a professor of Dept. of Marine System Engineering at Korea Maritime University. His research interests ar" (1994)