TOC와 통계적 분석에 의한 플라스틱보트 제조공정 개선에 관한 연구
A Study on the Improvement of Plastic Boat Manufacturing Process Using TOC & Statistical Analysis
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The purpose of this paper is to analyze the problems and the sources of defective products and draw improvement plans in a small plastic boat manufacturing process using TOC (Theory Of Constraints) and statistical analysis. TOC is a methodology to present a scheme for optimization of production process by finding the CCR (Capacity Constraints Resource) in the organization or the all production process through the concentration improvement activity. In this paper, we found and reformed constraints and bottlenecks in plastic boat manufacturing process in the target company for less defect ratio and production cost by applying DBR (Drum, Buffer, Rope) scheduling. And we set the threshold values for the critical process variables using statistical analysis. The result can be summarized as follows. First, CCRs in inventory control, material mix, and oven setting were found and solutions were suggested by applying DBR method. Second, the logical thinking process was utilized to find core conflict factors and draw solutions. Third, to specify the solution plan, experiment data were statistically analyzed. Data were collected from the daily journal addressing the details of 96 products such as temperature, humidity, duration and temperature of heating process, rotation speed, duration time of cooling, and the temperature of removal process. Basic statistics and logistic regression analysis were conducted with the defection as the dependent variable. Finally, critical values for major processes were proposed based on the analysis. This paper has a practical importance in contribution to the quality level of the target company through theoretical approach, TOC, and statistical analysis. However, limited number of data might depreciate the significance of the analysis and therefore it will be interesting further research direction to specify the significant manufacturing conditions across different products and processes.
Abstract
The purpose of this paper is to analyze the problems and the sources of defective products and draw improvement plans in a small plastic boat manufacturing process using TOC (Theory Of Constraints) and statistical analysis. TOC is a methodology to present a scheme for optimization of production process by finding the CCR (Capacity Constraints Resource) in the organization or the all production process through the concentration improvement activity. In this paper, we found and reformed constraints and bottlenecks in plastic boat manufacturing process in the target company for less defect ratio and production cost by applying DBR (Drum, Buffer, Rope) scheduling. And we set the threshold values for the critical process variables using statistical analysis. The result can be summarized as follows. First, CCRs in inventory control, material mix, and oven setting were found and solutions were suggested by applying DBR method. Second, the logical thinking process was utilized to find core conflict factors and draw solutions. Third, to specify the solution plan, experiment data were statistically analyzed. Data were collected from the daily journal addressing the details of 96 products such as temperature, humidity, duration and temperature of heating process, rotation speed, duration time of cooling, and the temperature of removal process. Basic statistics and logistic regression analysis were conducted with the defection as the dependent variable. Finally, critical values for major processes were proposed based on the analysis. This paper has a practical importance in contribution to the quality level of the target company through theoretical approach, TOC, and statistical analysis. However, limited number of data might depreciate the significance of the analysis and therefore it will be interesting further research direction to specify the significant manufacturing conditions across different products and processes.
참고문헌 (30)
- Aggarwal, S. C., "MRP, JIT, OPT, GMS : Making Sense of Production Operations Systems", Harvard Business Review, 63, pp.8~16 (1985)
- Bae, W. T., "Quantitative Evaluation of Plasticity and Extension for Extruding Body", Journal of Korean Ceramic Society, 39(11), pp.1048~1054 (2002)
- Chakravorty, S. S., "The Impact of Free Goods the Performance of Drum-buffer-rope Scheduling Systems", International Journal of Production Economics, 95, pp.347~357 (2005)
- 조종래, "6시그마 활동에서 TOC-사고프로세스 활용 프레임워크 - 제조기업의 생산성 개선 사례 -", 대한설비관리학회지, 14(1), pp.11~19 (2009), 대한설비관리학회
- 조석수, "폴리에틸렌 플레저 보트의 구조설계에 관한 연구", 대한기계학회논문집 A, 36(12), pp.1551~1561 (2012), 대한기계학회
- Cooper, D., "Business Research Methods" (2003), McGraw-Hill Higher Education Companies Inc
- Dong, Y. B., "The Prospects and the Present Condition of Plastic Industry in Japan", The Monthly Packaging world, (216), pp.128~134 (2011)
- Duclos, L. K., "The Impact of a Constraint Buffer in a Flow Shop", International Journal of Production Economics, 42, pp.175~185 (1995)
- Frank, E.H, "Regression Modeling Strategies" (2015), Springer
- Goldratt, E.M., "The Goal" (1992), North River Press
- Gupta, M., "Comparing TOC with MRP and JIT : a Literature Review", International Journal of Production Research, 47(13), pp.3705~3739 (2009)
- 홍순곤, "3차원 직조형 열가소성수지 복합재료 제조 및 특성화", Composites Research, 16(2), pp.33~40 (2003), 한국복합재료학회
- "HPT Company" (2014)[URL]
- Hurley, S., "Inventory and Capacity Trade-offs in a Manufacturing Cell", International Journal of Production Economics, 59(3), pp.203~212 (1999)
- John, K.K., "Polypropylene Structure, Blends and Composites : Composites" (1995), Chapman and Hall Press
- Jung, N.K., "TOC Golden Role", pp.14~96 (2002), HanEeon Community Press
- Kee, R., "A Comparative Analysis of Utilizing Activity-based Costing and the Theory of Constraints for Making Product-mix Decisions", International Journal of Production Economics, 63, pp.1~17 (2000)
- Kim, J.K., "Research Results and Trends Analysis on Process Fraction of Nonconforming Control Charts under Non-Normal Process, Korean Institute of Industrial Engineers", Proceedings of the Annual Autumn Meeting, pp.269~273 (2013)
- Kown, J.O., "Evaluation of FRP Test Boat Constructed by New Production Systems", Proceedings of the Annual Autumn Meeting, pp.100~103 (2001)
- 이동건, "레저보트 생산공정정보 기반의 공장 레이아웃 설계 시스템 개발", 대한조선학회 논문집, 50(1), pp.14~24 (2013), 대한조선학회
- 이정기, "회전성형 제품의 품질 개선을 위한 연구", 대한기계학회논문집 A, 28(6), pp.826~837 (2004), 대한기계학회
- 이승현, "제약이론을 활용한 업무프로세스의 효율적 실행 방법", 한국전자거래학회지, 10(1), pp.65~84 (2005), 한국전자거래학회
- A Study on Strategies to Develop the Marine Lesure Boat Industry, "Lee, S. W.", Korea Maritime Institute, ~, pp.Korea Maritime Institute Report 2009 (2009)
- Linhares, A., "Theory of Constraints and the Combinatorial Complexity of the Product-mix Decision", International Journal of Production Economics, 12(1), pp.121~129 (2009)
- 박경진, "제약공정에서 공정 및 제품의 품질향상을 위해 강건 호감도 함수 모형을 이용한 최적공정설계", 산업경영시스템학회지, 33(1), pp.1~9 (2010), 한국산업경영시스템학회
- "POLYPIA Company" (2014)[URL]
- Sale, M. L., "Survey-based Comparison of Performance and Change in Performance of Firms Using Traditional Manufacturing, JIT and TOC", International Journal of Production Research, 41(4), pp.829~844 (2003)
- Scott, M, "Applied Logistic Regression Analysis" (2002), Sage Publications, Inc.
- 송창용, "패러독스 경영을 위한 TOC와 TRIZ의 활용", 산업경영시스템학회지, 33(2), pp.72~80 (2010), 한국산업경영시스템학회
- Yoon, D.J., "The Cold Repressing Process of Sintered Preform", The Korea Society for Technology of Plasticity Conference, pp.281~286 (1997)