본문 바로가기
KERD
논문KCI 등재

FPSO용 연료가스압축 시스템을 위한 서지방지 밸브 설계

Design of Anti-Surge Valve for FPSO Fuel Gas Compressor System

2

조회

0

다운로드

1

인용

0

참고문헌

키워드

주제분류기계공학

초록

연료가스 압축 시스템은 중급의 FPSO에 설치되며, 이 시스템에서 서지를 방지하기 위하여 안티서지 밸브가 사용되어진다. 만약 서지가 발생하게 되면 시스템의 파괴를 초래할 수 있으므로 안티서지 밸브는 반드시 구조강도와 구조안전성 평가가 수반되어야한다. 특히, 비상시에도 밸브는 구조안전성과 그성능을 보장해야 된다. 이 연구에서는 안티서지 밸브의 구조강도와 구조안정성 평가를 수치해석을 통하여수행하였다. 형상모델은 유니그래픽스 NX4.0을 사용하였으며 시뮬레이션은 ANSYS Workbench 12.1버전을 이용하였다. 밸브의 허용 강도와 안전계수는 ASME Boiler & Pressure Vessel Code를 참조하였다.

Abstract

Fuel gas compressor system is applied to medium FPSO. In order to avoid surge, this system used the anti-surge valves. When surge occurs it may lead to system's fracture. So anti-surge valves are evaluated structural strength and structural safety. Especially, in emergency mode, valves are must be guaranteed structural safety. In this study, structural strength and structural safety of anti-surge valve was evaluated using the numerical simulation. Unigraphics NX 4.0 was used as Geometrical models, structural strength and structural safety calculation were carried out by ANSYS Workbench 12.1. The ASME Boiler & Pressure Vessel Code is refer to allowable strength and safety factor of the valves.

참고문헌 (12)

  1. "SK Communications"[URL]
  2. 이현동, "수도관 개량을 위한 의사결정 시스템 개발", 수도, 22(2) (1995)
  3. 노진식, "역지 밸브와 우회밸브를 이용한 펌프 관로계의 수격 현상 제어", 대한토목학회논문집, 19(11) (1997)
  4. 이성철, "유한요소법 을 이용한 서지 릴리프 밸브 몸체의 최적설계", pp.1901~10904 (2010), 대한기계학회 2010년도 추계학술대회 강연 및 논문 초록집
  5. 공재현, "유한요소법 을 이용한 서지 릴리프 밸브의 디스크 시일 최 적설계", pp.1897~1900 (2010), 대한기계학회 2010년도 추계학술대 회 강연 및 논문 초록집
  6. 정호승, "유한요소법을 이용한 극저온 미니어쳐 글로브 밸브의 구조설계에 관한 연구", 한국마린엔지니어링학회지, 31(4), pp.343~349 (2007), 한국마린엔지니어링학회
  7. 박영철, "LNG 선박용 배관에 사용되는 Butterfly Valve의 구조안정성평가에 관한 해석 기법", 한국기계가공학회지, 7(4), pp.72~76 (2008), 한국기계가공학회
  8. Ronald P. Lapina, "Estimating Centrifugal Compressor Performance", ~ (1982)
  9. David Japikse, "Advanced Experimental Techniques in Turbomachinery", ~ (1986)
  10. D.K. Choi, "Introduction to Continuum Mechanics Using Tensorial Approach" (2007), Intervision Publishing
  11. Element Library, "Release 12.1 Documentation for ANSYS Workbench, Element Reference", Element Library, ~ (2010)

관련 논문AI추천

이 간행물의 다른 논문 (8건)