LNG-FPSO에의 적용을 위한 Hamworthy Mark I Cycle의 최적 운전 조건 결정
Determination of the Optimal Operating Condition of the Hamworthy Mark I Cycle for LNG-FPSO
2
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
In this study, optimization was performed to improve the conventional liquefaction process of offshore plants, such as a LNG-FPSO(Liquefied Natural Gas-Floating, Production, Storage, and Offloading unit) by maximizing the energy efficiency of the process. The major equipments of the liquefaction process are compressors, expanders, and heat exchangers. These are connected by stream which has some thermodynamic properties, such as the temperature, pressure, enthalpy or specific volume, and entropy. For this, a process design problem for the liquefaction process of offshore plants was mathematically formulated as an optimization problem. The minimization of the total energy requirement of the liquefaction process was used as an objective function. Governing equations and other equations derived from thermodynamic laws acted as constraints. To solve this problem, the sequential quadratic programming(SQP) method was used.To evaluate the proposed method in this study, it was applied to the natural gas liquefaction process of the LNG-FPSO. The result showed that the proposed method could present the improved liquefaction process minimizing the total energy requirement as compared to conventional process.
Abstract
In this study, optimization was performed to improve the conventional liquefaction process of offshore plants, such as a LNG-FPSO(Liquefied Natural Gas-Floating, Production, Storage, and Offloading unit) by maximizing the energy efficiency of the process. The major equipments of the liquefaction process are compressors, expanders, and heat exchangers. These are connected by stream which has some thermodynamic properties, such as the temperature, pressure, enthalpy or specific volume, and entropy. For this, a process design problem for the liquefaction process of offshore plants was mathematically formulated as an optimization problem. The minimization of the total energy requirement of the liquefaction process was used as an objective function. Governing equations and other equations derived from thermodynamic laws acted as constraints. To solve this problem, the sequential quadratic programming(SQP) method was used.To evaluate the proposed method in this study, it was applied to the natural gas liquefaction process of the LNG-FPSO. The result showed that the proposed method could present the improved liquefaction process minimizing the total energy requirement as compared to conventional process.
참고문헌 (15)
- "HYSYS official homepage"[URL]
- Anderson, T.N, "Reliquefaction for Large LNG Carriers", Proceeding of the 1st Annual Gas Processing Symposium, pp.317~322 (2009)
- Cengel, Y.A, "Introduction to Thermodynamics and Heat Transfer" (2008), McGraw-Hill
- Chung, M.J, "Thermal System Design of Brayton Refrigeration Cycle for Production of Subcooled Liquid Nitrogen at 65K", Proceedings of the Annual Spring Meeting, The Korean Society of Mechanical Engineers, pp.231~234 (2009)
- Hwang, J.H, "Establishment of Offshore Process FEED(Front End Engineering Design) Method for Oil-based FPSO Topsides Systems", Proceedings of ISOPE(International Society of Offshore and Polar Engineers),, pp.144~150 (2009)
- Howard,D., "Numerical Techniques for the Simulation of Three Dimensional Swirling Flow", 박사, pp.1988
- Jung, H.C, "An Demand Outlook of Offshore Oil Production Structures", The Society of Naval Architects of Korea, 43(1), pp.49~57 (2006)
- Lee, K.Y, "An Efficient Global-Local Hybrid Optimization Method Using Design Sensitivity Analysis", International Journal of Vehicle Design, 28(4), pp.300~317 (2002)
- Merri, A, "An Experimental Study of Heat Transfer in Smooth Circular Tubes Rotating in the Orthogonal Mode", 박사, pp.1990
- Rance, J.M, "Flow and Heat Transfer in Rotating Channel", 박사, pp.1989
- R-Abadi,K.F., "An Experimental Investigation of the Confined Effect of Rotation and Internal Ribbing on Heat Transfer in Turbine Rotor Blade Cooling Channels", 박사, pp.1993
- Shukri,T., "LNG Technology Selection", Hydrocarbon Engineering, 9(2), pp.71~76 (2004)
- Smith,J.M., "Introduction to Chemical Engineering Thermodynamics" (2005), McGraw-Hill
- Venkatarathnam,G., "Cryogenic Mixed Refrigerant Processes" (2008), Springer
- Xia, J.Y, "Numerical Modeling for Turbulent Flow and Heat Transfer in a Coupled Solid", Fluid Rotating System, University of Wales, 1987