LNG 연료추진 선박용 가스레귤레이팅밸브의 파일럿 밸브 수치해석에 관한 연구
A Study on the Numerical Analysis of the Pilot Valve of Gas Regulating Valve for LNG Fuel Propulsion Ships
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The domestic shipbuilding industry is building high-value-added ships such as LNG and LPG, and the demand for natural gas, a clean energy source, is continuously increasing. Climate change, such as global warming, is occurring due to rising oil prices and excessive use of fossil fuels. To protect their homes from the changing environment, 121 countries announced intensive climate target policies to reduce carbon emissions to 0% by 2050. In this study, modeling and design were performed using SUS410 and SUS304L about the operating part of the Pilot valve based on the physical properties of the aluminum alloy used in the Pilot valve, a component of the gas pressure Regulating valve for LNG ships. Numerical We want to develop the optimal Pilot valve by comparing and analyzing the results using ANSYS, an analysis simulation program.
Abstract
The domestic shipbuilding industry is building high-value-added ships such as LNG and LPG, and the demand for natural gas, a clean energy source, is continuously increasing. Climate change, such as global warming, is occurring due to rising oil prices and excessive use of fossil fuels. To protect their homes from the changing environment, 121 countries announced intensive climate target policies to reduce carbon emissions to 0% by 2050. In this study, modeling and design were performed using SUS410 and SUS304L about the operating part of the Pilot valve based on the physical properties of the aluminum alloy used in the Pilot valve, a component of the gas pressure Regulating valve for LNG ships. Numerical We want to develop the optimal Pilot valve by comparing and analyzing the results using ANSYS, an analysis simulation program.
참고문헌 (10)
- 이정진, "초저온용 파일럿 밸브의 성능평가에 관한 동향", 동력시스템공학회지, 18(5), pp.5~10 (2014), 한국동력기계공학회[DOI]
- 최용준, "LNG 선박용 다이아프램식 가스압력레귤레이팅 밸브 모델링 및 동특성에 관한 연구", 동력시스템공학회지, 27(1), pp.5~13 (2023), 한국동력기계공학회
- 김주현, "LNG용 비상분리 커플링의 분리 시뮬레이션에 관한 연구", 동력시스템공학회지, 26(5), pp.44~52 (2022), 한국동력기계공학회
- 황동욱, "LNG", LNG-FPSO 선박용 컨벤셔널 및 파일럿 타입 밸브의 구조성능평가, 2012, pp.29(12), 1331~1339[DOI]
- 이석영, "선박용 가스엔진의 배기관 고압용 릴리프밸브 유체-구조 연성해석", 에너지공학, 30(3), pp.56~62 (2021), 한국에너지학회[DOI]
- 박진우, "안전율 확률분포에 근거한 케이블지지교량 주요부재의 내진성능 취약도 평가", 한국구조물진단유지관리공학회 논문집, 23(4), pp.37~44 (2019), 한국구조물진단유지관리공학회
- 이정욱, "300 kW급 선박용 디젤엔진 저배압 미세먼지저감 전기집진장치 설계", 동력시스템공학회지, 25(1), pp.60~69 (2021), 한국동력기계공학회[DOI]
- 류현종, "수소 충전소용 초고압 릴리프 밸브 구조설계에 관한 연구", 한국기계기술학회지, 24(5), pp.871~879 (2022), 한국기계기술학회[DOI]
- 박재형, "아음속 기저면 압력 예측 개선을 위한 k-w SST 난류 모델상수의 Bayesian Optimization", 한국전산유체공학회지, 27(1), pp.45~53 (2022), 한국전산유체공학회[DOI]
- 강남선, "해양플랜트 및 선박의 네트워크 통합 관리 시스템 운용 모듈 개발", 한국마린엔지니어링학회지, 40(7), pp.613~621 (2016), 한국마린엔지니어링학회[DOI]