Flow Characteristics of Polluted Air in a Rectangular Tunnel using PIV and CFD
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The flow characteristics of polluted air are analysed by comparing the results obtained from PIV(Particle Image Velocimetry) experiment and CFD(Computational Fluid Dynamics) commercial code. In order to simulate the polluted air flow, the olive oil has been used as tracer particles with the kinematic viscosity of air, × ms. The investigation has done in the range of Reynolds numbers of 870,1730 and 2890 due to the inlet flow velocities of 0.3, 0.6, and 1.0 m/s, respectively. The average velocity and the pressure distributions are comparatively discussed with respect to the three different Reynolds numbers. The results show that the outlet flow rates at three different Reynolds numbers are equivalent of 165 to 167 percent of the inlet ones. The pressure drop occurs in the model closed at both end sides and the highest pressures at each Reynolds number are positioned at the top of the tunnel between the inlet and outlet.
Abstract
The flow characteristics of polluted air are analysed by comparing the results obtained from PIV(Particle Image Velocimetry) experiment and CFD(Computational Fluid Dynamics) commercial code. In order to simulate the polluted air flow, the olive oil has been used as tracer particles with the kinematic viscosity of air, × ms. The investigation has done in the range of Reynolds numbers of 870,1730 and 2890 due to the inlet flow velocities of 0.3, 0.6, and 1.0 m/s, respectively. The average velocity and the pressure distributions are comparatively discussed with respect to the three different Reynolds numbers. The results show that the outlet flow rates at three different Reynolds numbers are equivalent of 165 to 167 percent of the inlet ones. The pressure drop occurs in the model closed at both end sides and the highest pressures at each Reynolds number are positioned at the top of the tunnel between the inlet and outlet.
참고문헌 (14)
- Juliss Brandies, "A numerical study of tunnel fires", Combustion Sci. and Tech, 35, pp.133~155 (1983)
- S. Aiba, "Heat transfer around tubes in in-line tube banks", Bull. Journal of the Japan Society of Machanical Engineers, 25, pp.919~926 (1982)
- W.J. Kim, "Origin and decay of longitudinal vortices developing in a curved rectangular duct", J. Fluids Eng, 116, pp.45~51 (1994)
- B. Bonhoff, "Experimental and numerical study of developed flow and heat transfer in coolant channels with 45 degree ribs", Int. J. Heat Fluid Flow, 20, pp.311~319 (1999)
- Dantec Dynamics, "FlowManger software and introduction to PIV: 2D PIV Installation and User's Guide", ~ (2000)
- Sang Kyoo Park, "PIV measurement of the flow field in rectangular tunnel", 한국마린엔지니어링학회지, 32(6), pp.886~892 (2008), 한국마린엔지니어링학회
- Yong Ho Lee, "Experimental and CFD Simulations of Polluted Air Behavior in Rectangular Tunnels", 한국마린엔지니어링학회지, 35(5), pp.608~615 (2011), 한국마린엔지니어링학회
- M. Raffel, "Particle Image Velocimetry, In A Practical Guide", pp.88~123 (1998), Springer
- Nuri Y, "Experimental and numerical simulation of fire in a scaled underground station", Engineering and Technology, 40, pp.309~314 (2008), World Academy of Science
- Wu, Y., "Control of smoke flow in tunnel fires using longitudinal ventilation systems - a study of the critical velocity", Fire Safety Journal, 35, pp.363~390 (2000)
- C.C. Hwang, "Experimental Study of thermally generated reverse stratified layers in a fire tunnel", Combust Flame, 66, pp.171~180 (1986)
- C.C. Hwang, "The critical ventilation velocity in tunnel fires - a computer simulation", Fire Safety Journal, 40, pp.213~244 (2005)
- F. Colella, "Multiscale modeling of transient flows from fire and ventilation in long tunnels", Journal of Computers & Fluids, 51, pp.16~29 (2011)
- V. Yakhot, "Renormalization group analysis of turbulence", Journal of Scientific Computing, 3, pp.3~51 (1986)