Distribution of CO Concentration in Two Tunnel Models Using CFD
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Carbon monoxide (CO) is a primary air pollutant as an indicator of air quality released from motor vehicle combustion. A comparative study of the distributions of CO concentration with no heat source in two tunnel models open and closed at both end sides is simulated with a commercial CFD code. The tunnel models are used to investigate the CO concentration distributions at three Reynolds numbers,which are computed by the inlet velocities of 0.3, 0.6 and 1.0 m/s. For a better tunnel design, the CFD predictive approaches are available in qualitatively studying the distributions of CO concentration. In the case of the tunnel open at both end sides in sixty seconds, the total CO concentrations are approximately twenty eight percent higher than those in the closed case.
Abstract
Carbon monoxide (CO) is a primary air pollutant as an indicator of air quality released from motor vehicle combustion. A comparative study of the distributions of CO concentration with no heat source in two tunnel models open and closed at both end sides is simulated with a commercial CFD code. The tunnel models are used to investigate the CO concentration distributions at three Reynolds numbers,which are computed by the inlet velocities of 0.3, 0.6 and 1.0 m/s. For a better tunnel design, the CFD predictive approaches are available in qualitatively studying the distributions of CO concentration. In the case of the tunnel open at both end sides in sixty seconds, the total CO concentrations are approximately twenty eight percent higher than those in the closed case.
참고문헌 (16)
- e, "Heating, Ventilating, and Air Conditioning: Analysis and Design, 6", pp.2005, McQuiston
- A. Abbasloo, "Prediction of three dimesional CO concentration distribution in zand tunnel of shiraz using computational fluid dynamic method", Journal of Applied Environmental and Biological Sciences, 2(1), pp.67~76 (2012)
- Joel Schwartz, "Air pollution and hospital admissions for cardiovascular disease in detroit, michigan", American Journal of Epidemiology, 142(1), pp.23~35
- Li Kun, "Influence of ventilation tube rupture from fires on secondary catastrophes in tunnel", First international symposium on mine safety science and engineering, Procedia Engineering, 26, pp.75~83 (2011)
- Olivier Vauquelin, "Experimental simulations of fire-induced smoke control in tunnels using an 'air-helium reduced scale model' : Principle, limitations, results and future", Tunnelling and Underground space Technology, 23, pp.171~178 (2008)
- C. C. Hwang, "The critical ventilation velocity in tunnel fires - a computer simulation", Fire Safety Journal, 40, pp.213~244 (2005)
- C. C. Hwang, "Experimental study of thermally generated reverse stratified layers in a fire tunnel", Combust Flame, 66, pp.171~180 (1986)
- Y. Wu, "Control of smoke flow in tunnel fires using longitudinal ventilation systems - A study of the critical velocity", Fire Safety Journal, 35, pp.363~390 (2000)
- Y. Nuri, "Experimental and numerical simulation of fire in a scaled underground station", World Academy of Science, Engineering and Technology, 40, pp.309~314 (2008)
- V. Yakhot, "Renormalization group analysis of turbulence", Journal of Science Computing, 1(1), pp.3~51 (1986)
- Anh Tuan Nguyen, "The effect of ceiling configurations on indoor air motion and ventilation flow rates", Journal of Building and Environment, 46, pp.1211~1222 (2011)
- M. Barbason, "About the choice of turbulence model in building physics simulation", Proceedings of the 7th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings (2010)
- Yong Ho Lee, "Experimental and CFD Simulations of Polluted Air Behavior in Rectangular Tunnels", 한국마린엔지니어링학회지, 35(5), pp.608~615 (2011), 한국마린엔지니어링학회
- Yong-Ho Lee, "Flow Behavior in a Rectangular Tunnel Opened and Closed at Both Sides Using CFD", 한국마린엔지니어링학회지, 36(3), pp.368~377 (2012), 한국마린엔지니어링학회
- Sang Kyoo Park, "PIV measurement of the flow field in rectangular tunnel", 한국마린엔지니어링학회지, 32(6), pp.886~892 (2008), 한국마린엔지니어링학회
- "Ansys CFX-solver Theory Guide, Release 13.0" (2010), Ansys, Inc.