본문 바로가기
KERD
논문KCI 등재

티타늄 용접공정에서 온도특성에 따른 실딩방법에 관한 연구

A study on the titanium welding process according to the temperature characteristics of shielding methods

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류기계공학

초록

용접과정 중에 용접부가 공기에 노출되면 용접성능을 약화시킨다. 불활성가스 텅스텐 아크용접(GTAW)법을 사용하여 티타늄 용접을 하는 경우 용접부가 자주/적색, 청색, 노란색, 회색, 흰색등의 빛깔을 보이면 이는 용접 시 공기 중의 산소와 질소에 오염된 것을 의미한다. 따라서 용접부를 대기로부터 보호하기 위한 방법으로 실딩 가스를 사용한다. 이것은 대기에 의한 오염을 방지할뿐만 아니라 용착부와 열영향부도 상온까지 냉각될 때까지 대기로부터 차단시킨다. 본 연구에서는Trailing Shielding Jig 의 모양과 형태 그리고 토치보호(13~20ℓ/min), 후방보호(22~30ℓ/min),이면보호(25~30ℓ/min)등 건전한 용접부에 적합한 실딩 가스에 대한 결과를 도출하였다.

Abstract

The welds tent to be weakened if it is exposed to the air during the welding process. In titanium welding with Gas Tungsten Arc Welding, inappropriate colors of the welds, such as purple/red,blue, yellow, gray, white and pink represents that it is contaminated by oxygen and nitrogen in the air. Shielding gases can be used to protect welds from the contamination. In addition, Weld metal and heat affected zone (HAZ) are also shielded from the air when it is cooled down to the room temperature. In this paper, appropriate shielding gases for the shape and form of Trailing Shielding Jig and torch shielding (13~20ℓ/min), after shielding (22~30ℓ/min), and back shielding (25~30ℓ/min) are studied.

참고문헌 (12)

  1. Y.-T. Lee, "Dream Material of Titanium", The Korea Metal Journal (2003)
  2. R. L. Little, "Welding and Welding Technology" (1973), Mcgraw-Hill Book
  3. W. R. Oates, "Welding Hand-book", American Welding Society, 4(8), pp.488~ (1998)
  4. Y.-T. Lee, "Dream Material of Titanium", The Korea Metal Journal (2003)
  5. Y.-T. Lee, "Dream Material of Titanium", The Korea Metal Journal (2003)
  6. W. Lucas, "Activating Flux-increasing the Performance and Productivity of the TIG and Plasma Processes" (1996), Welding and Metal fabrication
  7. M. J. Donachie, "Titanium and Titanium Alloys Source Book", pp.3~ (1982), American Society of Mechanical Engineer
  8. R. Boyer, "Titanium Alloys, Materials Property Handbook" (1994)
  9. W. F. Smith, "Structures and Properties of Engineering Alloys" (1981), McGraw-Hill
  10. Titanium association, "Titanium Processing Technology" (1992), lljin industry newspaper
  11. S. -C. Gil, "The Development and Use of Titanium Metal Technology" (1991), Industry and Technology Information
  12. H.-Y. Yang, "Metal Material" (1991), Munwudang

관련 논문AI추천

이 간행물의 다른 논문 (18건)