Nd:YAG 레이저를 이용한 순티타늄판의 겹치기 용접성
Lab Weldability of Pure Titanium by Nd:YAG Laser
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Titanium and its alloys have excellent corrosion resistance, high strength to weight ratios and creep properties in high temperature, which make them using many various fields of application. Especially, pure titanium, which has outstanding resistance for the stress corrosion cracking, crevice corrosion, pitting and microbiologically influenced corrosion, brings out to the best material for the heat exchanger, ballast tank, desalination facilities, and so on. Responding to these needs, welding processes for titanium are also being used GTAW, GMAW, PAW, EBW, LBW, resistance welding and diffusion bonding, etc. However, titanium is very active and highly susceptible to embrittlement by oxygen, nitrogen, hydrogen and carbon at high temperature, so it needs to shield the weld metal from the air and these gases during welding by non-active gas. In this study, it was possible to get sound beads without humping and spatter with a decrease of peak power according to increase of pulse width, change of welding speed and overlap rate for heat input control, and shield conditions at pulsed laser welding of titanium plates for Lap welding.
Abstract
Titanium and its alloys have excellent corrosion resistance, high strength to weight ratios and creep properties in high temperature, which make them using many various fields of application. Especially, pure titanium, which has outstanding resistance for the stress corrosion cracking, crevice corrosion, pitting and microbiologically influenced corrosion, brings out to the best material for the heat exchanger, ballast tank, desalination facilities, and so on. Responding to these needs, welding processes for titanium are also being used GTAW, GMAW, PAW, EBW, LBW, resistance welding and diffusion bonding, etc. However, titanium is very active and highly susceptible to embrittlement by oxygen, nitrogen, hydrogen and carbon at high temperature, so it needs to shield the weld metal from the air and these gases during welding by non-active gas. In this study, it was possible to get sound beads without humping and spatter with a decrease of peak power according to increase of pulse width, change of welding speed and overlap rate for heat input control, and shield conditions at pulsed laser welding of titanium plates for Lap welding.
참고문헌 (9)
- 이용태, "꿈의 신소재 티타늄" (2003), 한국철강신문
- S. Lathabai, "Comparison of keyhole and conventional gas tungsten arc welds in commercially pure titanium", Materials Science and Engineering, A299, pp.81~93 (2001)
- 藤井 信之, "純チタン材の溶融特性と溶接施工条件の検討 -純チタン材の溶接と継手性能 (第1報)-", 溶接學會論文集, 20(1), pp.20~25 (2002)
- 篠田 剛, "チタン合金のレーザー溶接", 軽金属溶接, 28(2), pp.49~56 (1990)
- 大橋 修, "SUS304Lステンレス鋼とチタンとの拡散接合", 溶接學會論文集, 13(3), pp.390~394 (1995)
- 瀬戶佐智生, "異種金属の短時間拡散接合に関する硏究, 溶接學會論文集", 溶接學會論文集, 10(2), pp.246~251 (1992)
- 김주우, "순Ti 및 Ti-6Al-4V합금의 기계적 성질에 미치는 용접조건의 영향", 대한용접학회 특별강연 및 학술발표대회, 통권 : 2, pp.228~230 (1998)
- チタニウム協会, "チタンの加工技術" (1992), 日刊工業新聞
- 朝比奈敏勝, "マグネシウム合金パルスレ-ザ溶接部の諸性質", 日本大學生産工學部硏究報告A, 38(2), pp.1~9 (2005)