210 kW/cyl 급 중속디젤엔진의 연료분사펌프 송출 압력파에 관한 수치 해석
A numerical analysis of the delivery pressure wave in a 210-kW/cyl fuel injection pump for medium-speed diesel engines
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
P사의 실린더 당 210 kW 급 중속디젤엔진의 연료분사펌프를 대상으로 연료 송출 압력파에 대해서 Ansys Fluent R15.0을 사용하여 수치 해석하였다. 연료 송출 압력파의 실험 결과와 수치 해석 결과가 유사하게 나타났으며, 전산유체역학을 이용한 연료분사펌프의 연료 송출 압력파에 대한 수치 해석의 신뢰성을 확인하였다.
Abstract
This paper presents a numerical analysis of the delivery pressure wave in a 210-kW/cyl fuel injection pump (P. Corporation, Changwon-si, Korea) for medium-speed diesel engines using Ansys Fluent R15.0. Results obtained from experiment and from numerical analysis of the fuel delivery pressure wave were compared and found to be similar, thereby confirming the reliability of the numerical analysis of the delivery pressure wave in the fuel injection pump.
참고문헌 (10)
- H. Rulfs, "Cavitation Phenomena in Fuel Injection Pumps", CIMAC Congress Copenhagen (1998)
- G. P. Michael, "Investigation of Fuel Injection System Cavitation Problems on the MV James R. Barker. MV Mesavi Miner and MV William J. De Lancey" (1985), Marine Technology
- J. H. Kim, "A Study on the Possibility of Localization for the Fuel Injection Pump in L28", 32H Middle Speed Diesel Engines, Pukyong National University, pp.Department of Control and Mechanical Engineering, 2015
- 류승협, "디젤 엔진 연료 분사 펌프 캐비테이션 현상의 가시화 연구", 한국마린엔지니어링학회지, 35(4), pp.460~467 (2011), 한국마린엔지니어링학회
- T. H. Park, "Flow visualization to evaluate jet-plunger for preventing cavitation damage of fuel injection pumps on diesel engines", The 36th Korean Society of Marine Engineering Fall Conference, pp.149~ (2012)
- P. M. Gómez-Aldaraví, "Development of a Computational Model for a Simultaneous Simulation of Internal Flow and Spray Break-up of the Diesel Injection Process", 박사, Department of Thermal Engines and Machines, pp.2014
- 양영준, "선박 중형디젤엔진용 연료분사펌프 해석 연구", 한국기계가공학회지, 11(6), pp.123~129 (2012), 한국기계가공학회
- D. T. Hountalas, "Development of a fast and simple simulation model for the fuel injection system of diesel engines", Advances in Engineering Software, 29(1), pp.13~28 (1998)
- B. Anna, "CFD Simulation of a Safety Relief Valve for Improvement of a One-dimensional Valve Model in RELAP5", M.S, pp.2012
- ANSYS. Inc, "Fluent Meshing Users Guide", 225~226 (2013)