스트레인 게이지를 이용한 5만 DWT급 석유화학제품운반선의 베어링 반력 및 선체변형량 분석에 관한 연구
A study on the analysis of bearing reaction forces and hull deflections affecting shaft alignment using strain gauges for a 50,000 DWT oil/chemical tanker
2
조회
0
다운로드
10
인용
0
참고문헌
키워드
초록
선박이 고출력화, 대형화 됨에 따라 추진축의 강성은 증가한 반면에 선체는 고장력 후판을 사용하므로 이전의 선체보다 훨씬 더 쉽게 변형되는 실정이다. 이는 기존의 선박보다 더욱 정교한 축계정렬이 요구됨을 의미한다. 본 연구에서는 최근 친환경 고효율 선박으로 등장한 5만DWT급 석유화학제품운반선을 대상으로 스트레인게이지법을 이용한 계측을 실시하고 축계 베어링 반력 및 선체 변형량 분석을 수행하였다. 계측은 선박의 통상 흘수 변화를 고려한 5개 조건에서 수행하여 추진축계가 선체 변형의 영향 하에서도 허용치를 만족하는지 여부를 확인하였다. 또한 이론적 계산방법, 잭업법 및 스트레인게이지법의 결과를 상호 비교하여 해석의 신뢰성을 교차검증하였다.
Abstract
In modern ships, the shafting system often becomes stiff owing to the high engine power, whereas the hull structure becomes more flexible owing to optimization using high-tensile-strength thick steel plates; therefore, more sophisticated shaft alignments are required. In this study, strain gauge–based measurement was conducted under five vessel operating conditions and bearing reaction forces and hull deflections affecting shaft alignment were analyzed for a 50,000 dead weight tonnage oil/chemical tanker that has gained repute as an eco-friendly vessel in recent years. Furthermore, the analytical results from each technique—theoretical calculation, jacking ups, and strain gauges—were cross-checked against each other in order to enhance the degree of accuracy and reliability of the calculation.
참고문헌 (21)
- R. Michel, "A quarter century of propulsion shafting design practice and operating experience in the U.S. Navy", Journal of the American Society of Naval Engineers, 71(1), pp.153~164 (1959)
- H. C. Anderson, "Co-ordinated alignment of line shaft, propulsion gear, and turbines", Annual Meeting of Society of Naval Architects and Marine Engineers, pp.449~523 (1959)
- W. E. Lehr, "Considerations in the design of marine propulsion shaft system", The International Journal of Society of Naval Architects and Marine Engineers, 69, pp.555~601 (1961)
- G. Mann, "Shipyard alignment of propulsion shafting using fair curve alignment theory", Journal of the American Society of Naval Engineers, 77(4), pp.651~659 (1965)
- American Bureau of Shipping, "Guidance Notes on Propulsion Shafting Alignment", American Bureau of Shipping, ~ (2006)
- K. C. Kim, "A study on optimum shaft alignment analysis for VLCC", Proceedings of the Special Transactions of the Society of Naval Architects of Korea, pp.134~137 (2005)
- Class NK, "Guidelines on Shafting Alignment", Class NK, ~ (2006)
- H. J. Jeon, "Ship Propulsion Transmission Equipment" (1986), Taehwa Publishing Company
- 서철오, "중형 화학제품 운반선의 최적 추진축계 정렬에 관한 연구", 석사, 기관시스템공학, pp.2010
- J. U. Lee, "A study on the Optimal Shafting Alignment Concerning Bearing Stiffness for Extra Large Container Carrier", 석사, Department of Marine System Engineering Graduate School, pp.2010
- R. B. Grant, "Shaft alignment methods with strain gages and load cells", Marine Technology, 17(1), pp.8~15 (1980)
- A. W. Forrest, "Shaft alignment using strain gages", Marine Technology, 18(3), pp.276~284 (1981)
- M. N. K. Rao, "Computer-aided alignment of ship propulsion shafts by strain gage methods", Marine Technology, 28(2), pp.84~90 (1991)
- 정현철, "스트레인게이지를 이용한 회전체의 축정렬 연구", 한국정밀공학회지, 19(5), pp.126~132 (2002), 한국정밀공학회
- L. Shi, "Research on shafting alignment considering ship hull deformations", Marine Structures, 23(1), pp.103~114 (2010)
- S. D. Zhang, "Identification of bearing load by three section strain gauge method: Theoretical and experimental research", Measurement, 46(10), pp.3968~3975 (2013)
- Y. J. Lee, "A Study on Hull Deflections Effecting the Ship’s Propulsion Shafting Alignment", 박사, Department of Mechanical Engineering, pp.2006
- MAN B&W, "Bearing load measurement by jaking up, ID No. 07424-5", ~ (2012)
- "Journal of Society of Naval Architects and Marine Engineers"[URL]
- Y. Batrak, "Computer application for shaft alignment design", International Conference on Computer Applications in Shipbuilding (2013)
- Korean Register, "SeaTrust-Machinery User Manual ver.1.0", Korean Register, ~ (2013)